Bedienungsanleitung Canon PIXMA MX924 (Seite 21 von 193) (Englisch)

542895

Zoom out

Zoom in

Vorherige Seite

1/193

Nächste Seite

4. Adjust the amount of extension from the paper

If necessary, adjust the amount of extension using the Amount of Extension slider.

Moving the slider to the right increases the amount extending off the paper, and moving the slider to

the left decreases the amount.

It is recommended to set the slider at the second position from the right for most cases.

Important

When the Amount of Extension slider is set to the rightmost position, the back side of the

paper may become smudged.

Complete the setup

Click OK.

When you execute print, the data is printed without any margins on the paper.

Important

When a page size that cannot be used for borderless printing is selected, the size is automatically

changed to the valid page sizes for borderless printing.

When Borderless is selected, the Printer Paper Size, Duplex Printing, Stapling Side settings, and

the Stamp/Background... (Stamp...) button on the Page Setup tab appear grayed out and are

unavailable.

When Envelope, High Resolution Paper, or T-Shirt Transfers is selected from the Media Type list

on the Main tab, you cannot perform borderless printing.

Depending on the type of the media used during borderless printing, the print quality may deteriorate

at the top and bottom of the sheet or stains may form.

When the ratio of the height to the width differs from the image data, a portion of the image may not

be printed depending on the size of the media used.

In this case, crop the image data with an application software according to the paper size.

Note

When Plain Paper is selected for Media Type on the Main tab, borderless printing is not

recommended. Therefore, the message for media selection appears.

When you are using plain paper for test printing, select Plain Paper, and click OK.

Expanding the Range of the Document to Print

Setting a large amount of extension allows you to perform borderless printing with no problems. However,

the portion of the document extending off the paper range will not be printed and for this reason, the

subjects around the perimeter of a photo may not be printed.

Try borderless printing once. When you are not satisfied with the result of borderless printing, reduce the

amount of extension. The extension amount decreases as the Amount of Extension slider is moved to the

left.

Important

When the amount of extension is decreased, an unexpected margin may be produced on the print,

depending on the size of the paper.

Note

When the Amount of Extension slider is set to the leftmost position, image data will be printed in

the full size. If you set this when printing the address side of a postcard, the postal code of the sender

is printed in the correct position.

When Preview before printing is checked on the Main tab, you can confirm whether there will be

no border before printing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon PIXMA MX924 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon PIXMA MX924

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info