Bedienungsanleitung Canon PIXMA MX924 (Seite 23 von 267) (Englisch)

542895

Zoom out

Zoom in

Vorherige Seite

1/267

Nächste Seite

Problems Receiving Faxes

Cannot Receive a Fax, Cannot Print a Fax

Machine Does Not Switch Automatically between Voice and Fax Calls

Quality of Received Fax is Poor

Cannot Receive a Color Fax

Errors Often Occur When You Receive a Fax

Cannot Receive a Fax, Cannot Print a Fax

• Check 1: Is the power turned on?

•

You cannot receive faxes if the power is turned off. Press the ON button to turn the power on.

•

If you disconnected the power cord without turning off the power (one of the buttons on the

operation panel is lit), reconnecting it turns on the power automatically.

•

If you disconnected the power cord after pressing the ON button to turn off the power (no buttons

on the operation panel are lit), reconnect it, then press the ON button to turn on the power.

•

If the power was turned off due to power failure, etc., the power is automatically turned on when

the power failure is resolved.

Important

Confirm that all lamps on the operation panel are off before unplugging the power cord, then

unplug the power cord.

If a power failure occurs or you unplug the power cord, all faxes stored in the machine's memory

are deleted.

For details on how to unplug the power cord, refer to Notice for Unplugging the Power Cord.

Note

If the faxes stored in the machine's memory are deleted by a power failure or unplugging the

power cord, the list of the faxes deleted from the machine's memory (MEMORY CLEAR REPORT)

will be printed after turning the machine on.

For details, see Summary of Reports and Lists.

• Check 2: Is the machine's memory full?

Print the received faxes stored in the machine's memory or save them on the USB flash drive, delete

them from the machine's memory, and have the sender resend the faxes.

Document Stored in Machine's Memory

• Check 3: Does an error occur during reception?

•

Ensure that a message is displayed on the LCD. When a message is displayed on the LCD, check

the cause.

A Message for Faxing Is Displayed on the LCD

•

Print ACTIVITY REPORT and check for an error.

Summary of Reports and Lists

• Check 4: Is the telephone line cable connected to the external device jack?

Reconnect it to the telephone line jack.

Basic Connection

•

Check 5: Is a different size of paper from that specified by Page size loaded?

If a different size of paper from that specified by Page size is loaded for printing faxes, the received

faxes will not be printed and will be stored in the machine's memory (Memory Reception). Load the

same size of paper as that specified by Page size, then press the OK button on the machine.

• Check 6: Is paper loaded?

If paper is not loaded, received faxes will be stored in the machine's memory without being printed

(Memory Reception). Load paper, then press the OK button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon PIXMA MX924 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon PIXMA MX924

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info