Bedienungsanleitung Canon Pixma TS5360 - Windows (Seite 43 von 465) (Englisch)

744595

Zoom out

Zoom in

Vorherige Seite

1/465

Nächste Seite

Restrictions

When connecting another device while a device (such as a computer) is already connected to the printer,

connect it using the same connection method as the connected device.

If you connect using a different connection method, the connection to the device in use will be disabled.

Connect via wireless router

• Make sure your device and the wireless router are connected. For details on checking these settings,

see the manual supplied with the wireless router or contact its manufacturer.

As for a device already connected to the printer without using a wireless router, reconnect it via a

wireless router.

• Configuration, router functions, setup procedures and security settings of wireless routers vary

depending on the system environment. For details, see the manual for your wireless router or contact

its manufacturer.

• This printer does not support IEEE802.11ac, IEEE802.11a, or IEEE802.11n (5 GHz). Check if your

device supports IEEE802.11n (2.4 GHz), IEEE802.11g or IEEE802.11b.

• If your device is set to the "IEEE802.11n only" mode, WEP or TKIP cannot be used as a security

protocol. Change the security protocol for your device to something other than WEP and TKIP or

change the setting to something other than "IEEE802.11n only."

The connection between your device and the wireless router will be temporarily disabled while the

setting is changed. Do not proceed to the next screen of this guide until setup is complete.

• For office use, consult your network administrator.

• Note that if you connect to a network with no security protection, your personal information could be

disclosed to a third party.

Wireless Direct

Important

• If a device is connected to the Internet via a wireless router, and you then connect it to a printer in

Wireless Direct mode, the existing connection between the device and wireless router will be

disabled. In that case, the connection of the device may switch to a mobile data connection

automatically depending on your device. When you connect to the Internet using a mobile data

connection, charges may apply depending on your contract.

When you connect a device and the printer using Wireless Direct, the connection information

will be saved to Wi-Fi settings. The device may be connected to the printer automatically even

after disconnecting it or connecting it to another wireless router.

To prevent automatic connection to the printer in Wireless Direct mode, change the connection

mode after using the printer, or set not to connect automatically in the Wi-Fi settings of the

device.

For details on changing the settings of your device, see the manual supplied with the device or

contact its manufacturer.

• If you connect a device and the printer using Wireless Direct, Internet connection may become

unavailable depending on your environment. In that case, web services for the printer cannot be used.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Pixma TS5360 - Windows Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon Pixma TS5360 - Windows

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info