682928
1
Zoom out
Zoom in
Vorherige Seite
1/100
Nächste Seite
Aloitusopas
Lue Turvallisuus ja tärkeitä tietoja
(lisähuomautus) ensin.
Før du begynder
Læs Sikkerhedsoplysninger og vigtige
oplysninger (tillæg) først.
Komme i gang
Les Sikkerhetsinformasjon og viktig
informasjon (tillegg) først.
Uppstartsguide
Läs Information om säkerhet och annan viktig
information (bilaga) först.
Ξεκινώντας
Διαβάστε πρώτα τις Πληροφορίες για την ασφάλεια
και σημαντικές πληροφορίες (συμπλήρωμα).
Guía de inicio
Lea primero Información de seguridad
e información importante (apéndice).
Para Começar
Leia Informações Importantes e Sobre
Segurança (adendo) primeiro.
Guida Rapida
Leggere preventivamente le Informazioni
importanti e sulla sicurezza (appendice).
Aan de Slag-gids
Lees eerst Veiligheidsinformatie en belangrijke
informatie (addendum).
Inbetriebnahme
Lesen Sie Sicherheitsinformationen und
wichtige Hinweise (Anhang) zuerst.
Démarrage
Lire Sécurité et informations importantes
(addendum) en premier.
Getting Started
Read Safety and Important Information
(addendum) rst.
1
ENGLISH
1. Checking Included Items
Setup CD-ROM for
Windows PC
Power cord
Safety and Important Information
Ink tanks for setup
Getting Started (this manual)
2. Removing Packing
Materials / Turning on
Printer
When printing starts, the operation panel lifts up
automatically and the paper output tray comes out. Do
not put anything in front of the printer.
1
Remove the packing materials (such as orange
tape and protective lm on the touch screen) from
outside the printer.
Using the printer with the protective lm attached
may cause malfunction.
2
aHook the hollows on the both sides of
the printer with your ngers and open the
scanning unit / cover.
bRemove the orange tape.
b
a
3
LIFT UP the scanning unit / cover, and then close
it.
4
Connect the power cord diagonally from the back.
Back
Do not connect any cables except the power cord
yet.
5
Lift the operation panel and press the ON button.
6
Drag the screen and tap the language to select.
7
Read the messages and follow the on-screen
instructions.
For details about information that is sent to Canon,
refer to "Sending Data To Canon" in Safety and
Important Information.
8
Select OK.
3. Installing Ink Tank
1
Open the scanning unit / cover.
Do not touch the print head holder (A) until it
stops.
(A)
2
2
aCOMPLETELY remove the orange tape.
bRemove the protective wrap.
a
b
3
Hook the orange cap with your nger to remove it
GENTLY.
Do not push the both sides of the
ink tank with the Y-shape air hole
blocked.
Do not touch.
4
Insert the ink tank into the print head and push it
down rmly until it snaps into place.
The color of the ink tank that you set appears on
screen.
If the color is not displayed on the screen even
though you have installed the ink tank, the color
of the ink tank may be wrong or you may have
installed an ink tank, such as one with a different
model number, that is not supported by this printer.
Either install an ink tank for the correct color or use
the provided ink tank for setup.
5
Install all the ink tanks the same way as in step
4, and then conrm that all the colors appear on
screen.
6
LIFT UP the scanning unit / cover, and then close
it.
If an error message appears on the screen, make
sure the ink tanks are installed correctly.
4. Loading Paper / Aligning
Print Head
To obtain a better print result, print a pattern for Print Head
Alignment and scan it.
1
aPull out the cassette.
bRemove the cassette cover.
a
b
2
Open the paper guides, and then align the guide in
front with the mark of LTR or A4.
3
ENGLISH
3
aLoad plain LTR or A4 size paper with the print
side facing down.
bSlide the right paper guide to align it with the
side of the paper stack.
cAlign the paper stack with the paper guide in
front.
a
b
c
4
Attach the cassette cover and insert the cassette.
The following gure shows the state after the cassette
is inserted.
Side
5
If the following screen appears, select OK.
The paper output tray comes out automatically.
6
Make sure that a pattern is printed for Print Head
Alignment.
It takes about 4 minutes to nish printing.
7
aOpen the document cover.
bLoad the printed pattern on the platen glass.
a
b
8
After closing the document cover, select OK.
9
If the following screen appears, select OK.
If the orange tape remains on the paper output tray,
remove it.
4
6-A. Connecting to Computer
You need a connection setup for each computer. Proceed with the setup from step 1 for each computer.
1
Start the setup le for either method or method .
5. Preparing for Connection
In the following description, smartphones and tablet
devices are collectively described as smartphone.
1
Select Next.
2
Make sure that the following screen appears.
From here on, proceed to a step according to how you use
the printer.
Use Only Printer
aTap the Stop button.
bSelect Do not connect > Yes in this order.
The setup is now complete.
aOpen a web browser ( etc.) on your computer.
bInput the following URL and access the Canon
website.
cSelect Set Up.
dInput the model name of your printer and click OK.
You can select a model name from the list.
eClick Setup.
The procedures for Windows and Mac OS are shown
below. If you are using a computer with an OS other
than Windows or Mac OS, such as a Chrome OS, do
the setup according to the on-screen instructions.
fClick Download and download the setup le.
gExecute the downloaded le.
Proceed to step on the next page to
continue.
Downloading from the Internet
To use the printer by connecting only to a computer or both to a computer and smartphone
"6-A. Connecting to Computer"
To use the printer by connecting only to a smartphone
"6-B. Connecting to Smartphone" on page 6
To use the printer without connecting to a computer or smartphone
"Use Only Printer"
5
ENGLISH
Using Setup CD-ROM (Windows Only)
aLoad the Setup CD-ROM in your computer.
When using Windows 10 or Windows 8.1:
bWhen the following message appears on the right
side of your computer screen, click it.
cIf the following screen appears, click Run
Msetup4.exe.
dIf the User Account Control dialog box appears,
click Yes.
When This Message Does Not Appear (or Has
Disappeared)
1. Click File Explorer on the taskbar.
or
2. Click This PC on the left side of the opened window.
3. Double-click the
CD-ROM icon on the right side of
the window.
If the contents of the CD-ROM appear, double-click
Msetup4.exe.
4. Proceed to step d.
When using Windows 7:
b When the AutoPlay screen appears, click Run
Msetup4.exe.
c If the User Account Control dialog box appears,
click Continue.
When AutoPlay Screen Does Not Appear
1. Click Computer from the start menu.
2. Double-click the
CD-ROM icon on the right side of
the opened window.
If the contents of the CD-ROM appear, double-click
Msetup4.exe.
Proceed to step to continue.
2
Click Start Setup.
The connection with your computer is now complete. You can print from your
computer.
If the following screen appears, click Exit.
Follow the on-screen
instructions to proceed
with the setup.
6
6-B. Connecting to Smartphone
You need a connection setup for each smartphone. Proceed with the setup from step 1 for each smartphone.
Preparation
Turn on Wi-Fi on your smartphone.
If you have a wireless router, connect your smartphone to the wireless router you want to connect to the printer.
* For operations, refer to manuals of your smartphone and the wireless router or contact those manufacturers.
1
Install the application software Canon PRINT Inkjet/SELPHY in your smartphone.
: Search "Canon PRINT" in App Store.
: Search "Canon PRINT" in Google Play.
Or access the Canon website by scanning the QR code.
* You may not connect your smartphone to the Internet wirelessly during connecting the printer to the smartphone directly.
In that case, you may be charged depending on the contract with your service provider.
* Up to 5 devices can be connected to the printer via wireless LAN connection directly.
2
Check the display on the printer.
The screen turns off when no operation is made for about 10 minutes. Tap the touch screen to display the screen.
If the following screen appears:
Check the icon on the lower left, and then proceed
to
or .
If appears, the printer cannot communicate
by wireless LAN connection. For details, access
"http://ij.start.canon" to see Frequently Asked Questions.
If the following screen appears:
Proceed to
.
No (Proceed to
.)
YES
aTap the installed application software.
bFollow the on-screen instructions to register the
printer.
cMake sure that the following screen appears.
The connection with your smartphone is
now complete. You can print from your
smartphone.
To print photos, load photo paper. Proceed to "Loading
Photo Paper" on page 8.
The following icon appears.
(The printer is connected to a network.)
7
ENGLISH
Procedures below vary depending on iOS or Android. Select your operating system and proceed to its
procedure.
aTap Settings on your smartphone's home screen,
and tap Canon_ij_XXXX in the Wi-Fi settings.
If Canon_ij_XXXX does not appear on the list,
see "Preparation for Printer" below to operate the
printer, and then repeat step a.
bTap the installed application software.
cFollow the on-screen instructions to register the
printer.
Follow the on-screen instructions to proceed
with the setup.
If you select Auto Select Conn. Method
(recommended) on the connection method
selecting screen, the appropriate connection
method is selected automatically depending on
your environment.
dMake sure that the following screen appears.
aTap the installed application software.
bFollow the on-screen instructions to register the
printer.
If a message saying "Printer is not registered.
Perform printer setup?" does not appear, see
"Preparation for Printer" below to operate the
printer, and then wait for a while until the message
appears.
Follow the on-screen instructions to proceed
with the setup.
The appropriate connection method is selected
depending on your environment.
If two printer names appear on the Register
Printer screen as shown below, select A.
A) TS8100 series (xxx.xxx.xxx.xxx)
B) Direct-xxxx-TS8100series
cMake sure that the following screen appears.
The connection with your smartphone is now complete. You can print from your
smartphone.
To print photos, load photo paper. Proceed to "Loading Photo Paper" on page 8.
aSelect
on the touch screen of the printer.
bSelect the icon on the lower left of the HOME
screen.
cIf the following screen appears, select No.
dSelect LAN settings > Wireless LAN > Wireless
LAN setup > Easy wireless connect in this order.
eSelect Yes.
fReturn to the operation of your smartphone.
Preparation for Printer
8
1
Open the rear tray cover and pull out the paper
support.
2
aOpen the feed slot cover.
bSlide the right paper guide to the end.
a
b
3
aLoad several sheets of photo paper with the
print side facing up.
bSlide the right paper guide to align it with the
side of the paper stack.
a
b
4
Close the feed slot cover.
Read the message on the printer's screen and
register the information of the loaded paper.
1
Make sure the printer is turned on.
2
Load several sheets of photo paper.
3
Insert the memory card into the card slot.
4
Select photos to be printed.
5
Tap the Color button.
The printer starts printing.
Loading Photo Paper
Printing Photos Saved on Memory Card
You can print photos saved on a memory card with easy operations.
Load photo paper in the rear tray.
1
FRANÇAIS
1. Vérication des éléments fournis
CD-ROM d'installation
pour PC Windows
Cordon
d'alimentation
Sécurité et informations
importantes
Cartouches d'encre
pour la conguration
Démarrage (ce manuel)
2. Retrait des matériaux
d'emballage / Mise sous
tension de l'imprimante
Lorsque l'impression démarre, le panneau de contrôle
se lève automatiquement et le bac de sortie papier sort.
Ne placez aucun objet devant l'imprimante.
1
Retirez les matériaux d'emballage (tels que
la bande orange et le lm protecteur sur l'écran
tactile) de l'imprimante.
L'utilisation de l'imprimante avec le lm protecteur
en place risque d'entraîner un dysfonctionnement.
2
aPlacez vos doigts dans les cavités de chaque
côté de l'imprimante et ouvrez l'unité de
numérisation / capot.
bRetirez la bande orange.
b
a
3
SOULEVEZ l'unité de numérisation / capot, puis
fermez-la.
4
Branchez le cordon d'alimentation en diagonale
à partir de l'arrière.
Arrière
Ne branchez aucun câble pour le moment,
à l'exception du cordon d'alimentation.
5
Levez le panneau de contrôle et appuyez sur
le bouton MARCHE (ON).
6
Faites glisser l'écran et touchez la langue
à sélectionner.
7
Lisez les messages et suivez les instructions
à l'écran.
Pour plus de détails sur les informations envoyées
à Canon, reportez-vous à « Envoi De Données
A Canon » dans Sécurité et informations
importantes.
8
Sélectionnez OK.
3. Installation d'une
cartouche d'encre
1
Ouvrez l'unité de numérisation / capot.
Évitez tout contact avec le support de tête
d'impression (A) jusqu'à l'arrêt du mécanisme.
(A)
2
2
aRetirez COMPLÈTEMENT la bande orange.
bRetirez l'emballage de protection.
a
b
3
Placez vos doigts sur la capsule orange et retirez-
la DOUCEMENT.
Ne poussez pas sur les deux côtés de
la cartouche d'encre alors que le trou
d'aération en forme de Y est bloqué.
Ne pas toucher.
4
Insérez la cartouche d'encre dans le support
de tête d'impression et enfoncez-la fermement
jusqu'à entendre un déclic.
La couleur de la cartouche d'encre que vous
congurez apparaît à l'écran.
Si la couleur ne s'afche pas à l'écran alors que vous
avez installé la cartouche d'encre, la couleur de la
cartouche d'encre est peut-être fausse, ou vous avez
peut-être installé une cartouche d'encre non prise en
charge par l'imprimante, par exemple une cartouche
avec un numéro de modèle différent. Installez une
cartouche d'encre de la bonne couleur ou utilisez la
cartouche d'encre fournie pour la conguration.
5
Installez toutes les cartouches d'encre en procédant
comme décrit à l'étape 4, puis conrmez que toutes
les couleurs apparaissent à l'écran.
6
SOULEVEZ l'unité de numérisation / capot, puis
fermez-la.
Si un message d'erreur apparaît à l'écran, vériez que
les cartouches d'encre sont correctement installées.
4. Chargement du papier /
Alignement de la tête
d'impression
Pour obtenir une impression de meilleure qualité, imprimez
un motif pour l'Alignement tête d'impression et numérisez-le.
1
aRetirez la cassette.
bRetirez le couvercle de la cassette.
a
b
2
Ouvrez les guides papier, puis alignez le guide
avant avec la marque LTR ou A4.
3
FRANÇAIS
3
aChargez du papier ordinaire au format LTR
ou A4 face à imprimer vers le bas.
bFaites glisser le guide papier droit de manière
à l'aligner avec le côté de la pile de papier.
cAlignez la pile de papier avec le guide papier
avant.
a
b
c
4
Attachez le couvercle de la cassette et insérez
la cassette.
Dans la gure suivante, la cassette est insérée.
Côté
5
Si l'écran suivant s'afche, sélectionnez OK.
Le bac de sortie papier s'ouvre automatiquement.
6
Assurez-vous qu'un motif est imprimé pour
Alignement tête d'impression.
L'impression nécessite environ 4 minutes.
7
aOuvrez le capot du scanner.
bChargez le motif imprimé sur la vitre
d'exposition.
a
b
8
Après avoir fermé le capot du scanner,
sélectionnez OK.
9
Si l'écran suivant s'afche, sélectionnez OK.
Si la bande orange se trouve sur le bac de sortie
papier, retirez-la.
4
6-A. Connexion à un ordinateur
Vous devez congurer une connexion pour chaque ordinateur. Poursuivez la conguration à partir de l'étape 1 pour chaque ordinateur.
1
Démarrez le chier de conguration pour la méthode ou la méthode .
5. Préparation de la connexion
Dans la description suivante, les smartphones et les
tablettes sont regroupés sous le terme smartphone.
1
Sélectionnez Suivant.
2
Assurez-vous que l'écran suivant s'afche.
Poursuivez avec l'étape correspondant à la manière dont
vous utilisez l'imprimante.
Utiliser uniquement l'imprimante
aTouchez le bouton Arrêt (Stop).
bSélectionnez Ne pas connecter > Oui dans cet ordre.
La conguration est terminée.
aOuvrez un navigateur Web ( etc.) sur votre ordinateur.
bEntrez l'URL suivante et accédez au site Web Canon.
cSélectionnez Conguration.
dEntrez le nom de modèle de votre imprimante
et cliquez sur OK.
Vous pouvez sélectionner un nom de modèle à partir
de la liste.
eCliquez sur Conguration.
Les procédures pour Windows et Mac OS sont
présentées ci-dessous. Si vous utilisez un ordinateur
équipé d'un système d'exploitation autre que
Windows ou Mac OS (Chrome OS, par exemple)
procédez à la conguration en fonction des
instructions qui s'afchent à l'écran.
fCliquez sur Télécharger et téléchargez le chier
de conguration.
gExécutez le chier téléchargé.
Poursuivez avec l'étape à la page
suivante pour continuer.
Téléchargement depuis Internet
Pour utiliser l'imprimante en la connectant uniquement à un ordinateur, ou à la fois à un ordinateur et à un smartphone
« 6-A. Connexion à un ordinateur »
Pour utiliser l'imprimante en la connectant uniquement à un smartphone
« 6-B. Connexion à un smartphone » à la page 6
Pour utiliser l'imprimante sans la connecter à un ordinateur ou à un smartphone
« Utiliser uniquement l'imprimante »
5
FRANÇAIS
Utilisation du CD-ROM d'installation (Windows uniquement)
aChargez le CD-ROM d'installation dans votre ordinateur.
Si vous utilisez Windows 10 ou Windows 8.1 :
bLorsque le message suivant apparaît sur la droite
de l'écran de l'ordinateur, cliquez dessus.
cSi l'écran suivant s'afche, cliquez sur Exécuter
Msetup4.exe.
dSi la boîte de dialogue Contrôle de compte
d'utilisateur apparaît, cliquez sur Oui.
Lorsque ce message n'apparaît pas (ou n'est plus afché)
1. Cliquez sur Explorateur de chiers dans la barre
des tâches.
ou
2. Cliquez sur Ce PC dans la partie gauche de la fenêtre
ouverte.
3. Double-cliquez sur
l'icône CD-ROM dans la partie
droite de la fenêtre.
Si le contenu du CD-ROM s'afche, double-cliquez
sur Msetup4.exe.
4. Passez à l'étape d.
Si vous utilisez Windows 7 :
b Lorsque l'écran Lecture automatique apparaît,
cliquez sur Exécuter Msetup4.exe.
c Si la boîte de dialogue Contrôle de compte
d'utilisateur apparaît, cliquez sur Continuer.
Lorsque l'écran Lecture automatique ne s'afche pas
1. Cliquez sur Ordinateur à partir du menu Démarrer.
2. Double-cliquez sur
l'icône CD-ROM dans la partie
droite de la fenêtre ouverte.
Si le contenu du CD-ROM s'afche, double-cliquez
sur Msetup4.exe.
Poursuivez avec l'étape pour continuer.
2
Cliquez sur Commencer la conguration.
La connexion avec votre ordinateur est terminée. Vous pouvez imprimer à partir
de votre ordinateur.
Si l'écran suivant s'afche, cliquez sur
Quitter.
Suivez les instructions à
l'écran pour poursuivre la
conguration.
7
FRANÇAIS
Les procédures ci-dessous varient selon que vous utilisez iOS ou Android. Sélectionnez votre système
d'exploitation et poursuivez avec la procédure s'y rapportant.
aTouchez Réglages sur l'écran d'accueil du smartphone,
puis touchez Canon_ij_XXXX dans les réglages Wi-Fi.
Si Canon_ij_XXXX n'apparaît pas dans la liste,
reportez-vous à la section « Préparation de
l'imprimante » ci-dessous pour faire fonctionner
l'imprimante, puis répétez l'étape a.
bTouchez le logiciel d'application installé.
cSuivez les instructions à l'écran pour enregistrer
l'imprimante.
Suivez les instructions à l'écran pour poursuivre
la conguration.
Si vous sélectionnez Méthode sél. auto conn.
(recommandé) dans l'écran de sélection de la
méthode de connexion, la méthode de connexion
appropriée est sélectionnée automatiquement selon
votre environnement.
dAssurez-vous que l'écran suivant s'afche.
aTouchez le logiciel d'application installé.
bSuivez les instructions à l'écran pour enregistrer
l'imprimante.
Si le message « L'imprimante n'est pas enregistrée.
Congurer l'imprimante ? » ne s'afche pas,
reportez-vous à la section « Préparation de
l'imprimante » ci-dessous pour faire fonctionner
l'imprimante et attendez que le message s'afche.
Suivez les instructions à l'écran pour poursuivre
la conguration.
La méthode de connexion appropriée est
sélectionnée selon votre environnement.
Si deux noms d'imprimantes apparaissent sur
l'écran Enreg. imprimante comme indiqué ci-
dessous, sélectionnez A.
A) TS8100 series (xxx.xxx.xxx.xxx)
B) Direct-xxxx-TS8100series
cAssurez-vous que l'écran suivant s'afche.
La connexion avec votre smartphone est terminée. Vous pouvez imprimer à partir
de votre smartphone.
Pour imprimer des photos, chargez du papier photo. Passez à la section « Chargement de papier photo », à la page 8.
aSélectionnez
sur l'écran tactile de l'imprimante.
bSélectionnez l'icône dans le coin inférieur gauche
de l'écran ACCUEIL.
cSi l'écran suivant s'afche, sélectionnez Non.
dSélectionnez Param. réseau > Réseau sans l >
Cong. du réseau sans l > Connexion facile
sans l dans cet ordre.
eSélectionnez Oui.
fRevenez au fonctionnement de votre smartphone.
Préparation de l'imprimante
3
NEDERLANDS
3
aPlaats normaal papier van LTR- of A4-formaat
met de afdrukzijde omlaag.
bVerschuif de rechter papiergeleider om deze
uit te lijnen met de zijkant van de papierstapel.
cLijn de papierstapel uit met de papiergeleider
aan de voorkant.
a
b
c
4
Bevestig de cassetteklep en plaats de cassette.
In de volgende afbeelding ziet u de status nadat
de cassette is geplaatst.
Zijde
5
Selecteer OK als het volgende scherm wordt
weergegeven.
De papieruitvoerlade komt automatisch naar voren.
6
Zorg ervoor dat een patroon wordt afgedrukt voor
Uitlijning printkop (Print Head Alignment).
Het afdrukken duurt ongeveer 4 minuten.
7
aOpen de documentklep.
bPlaats het afgedrukte patroon op de glasplaat.
a
b
8
Sluit de documentklep en selecteer OK.
9
Selecteer OK als het volgende scherm wordt
weergegeven.
Als er oranje tape achterblijft op de papieruitvoerlade,
verwijdert u deze.
4
6-A. Verbinden met een computer
U moet een verbinding congureren voor elke computer. Ga verder met de installatie vanaf stap 1 voor elke computer.
1
Start het installatiebestand voor een van beide methoden of voor de methode .
5. Voorbereiden op de verbinding
In de volgende omschrijving worden smartphones en
tablets gezamenlijk aangeduid met de term smartphone.
1
Selecteer Volgende (Next).
2
Controleer of het volgende scherm wordt weergegeven.
Ga vanaf hier verder naar de stap die past bij de manier
waarop u de printer gebruikt.
Alleen printer gebruiken
aTik op de knop Stoppen (Stop).
bSelecteer Niet verbinden (Do not connect) >
Ja (Yes) in deze volgorde.
De installatie is nu voltooid.
aOpen een webbrowser ( enzovoort) op uw
computer.
bVoer de volgende URL in en ga naar de website
van Canon.
cSelecteer Installatie.
dVoer de modelnaam van uw printer in en klik op OK.
U kunt een modelnaam in de lijst selecteren.
eKlik op Installatie.
Hieronder worden de procedures voor Windows en
Mac OS beschreven. Als u een computer gebruikt
met een ander besturingssysteem dan Windows of
Mac OS, zoals Chrome OS, voert u de installatie
volgens de instructies op het scherm uit.
fKlik op Downloaden en download
het installatiebestand.
gVoer het gedownloade bestand uit.
Ga naar stap op de volgende pagina
om verder te gaan.
Downloaden van internet
De printer gebruiken door alleen verbinding te maken met een computer of zowel met een computer als een smartphone
"6-A. Verbinden met een computer"
De printer gebruiken door deze alleen met een smartphone te verbinden
"6-B. Verbinden met een smartphone" op pagina 6
De printer gebruiken zonder verbinding te maken met een computer of smartphone
"Alleen printer gebruiken"
5
NEDERLANDS
De installatie-cd-rom (alleen Windows) gebruiken
aPlaats de installatie-cd-rom in de computer.
Wanneer u Windows 10 of Windows 8.1 gebruikt:
bWanneer het volgende bericht aan de rechterkant
van uw computerscherm wordt weergegeven,
klikt u erop.
cKlik op Msetup4.exe uitvoeren (Run Msetup4.exe)
als het volgende scherm wordt weergegeven.
dAls het dialoogvenster Gebruikersaccount
beheren (User Account Control) wordt geopend,
klikt u op Ja (Yes).
Wanneer dit bericht niet wordt weergegeven (of wanneer
het is verdwenen)
1. Klik op Verkenner (File Explorer) op de taakbalk.
of
2. Klik op Deze pc (This PC) aan de linkerkant van het
geopende venster.
3. Dubbelklik op het
cd-pictogram aan de rechterkant
van het venster.
Als de inhoud van de cd-rom wordt weergegeven,
dubbelklikt u op Msetup4.exe.
4. Ga naar stap d.
Wanneer u Windows 7 gebruikt:
b Wanneer het scherm Automatisch afspelen
(AutoPlay) wordt geopend, klikt u op Msetup4.exe
uitvoeren (Run Msetup4.exe).
c Als het dialoogvenster Gebruikersaccount
beheren (User Account Control) wordt geopend,
klikt u op Doorgaan (Continue).
Wanneer het scherm Automatisch afspelen (AutoPlay)
niet wordt geopend
1. Klik op Computer in het menu Start.
2. Dubbelklik op het
cd-pictogram aan de rechterkant
van het geopende venster.
Als de inhoud van de cd-rom wordt weergegeven,
dubbelklikt u op Msetup4.exe.
Ga naar stap om verder te gaan.
2
Klik op Beginnen met instellen
(Start Setup).
De verbinding met de computer is nu voltooid. U kunt afdrukken vanaf uw computer.
Klik op Afsluiten (Exit) als het volgende
scherm wordt weergegeven.
Volg de instructies op het
scherm om door te gaan
met de installatie.
6
6-B. Verbinden met een smartphone
U moet een verbinding instellen voor elke smartphone. Ga verder met de installatie vanaf stap 1 voor elke smartphone.
Voorbereiding
Schakel Wi-Fi in op uw smartphone.
Als u een draadloze router hebt, sluit u uw smartphone aan op de draadloze router die u met de printer wilt verbinden.
* Raadpleeg voor de stappen de handleiding van uw smartphone en de draadloze router of neem contact op met
de desbetreffende fabrikant.
1
Installeer de toepassing Canon PRINT Inkjet/SELPHY op uw smartphone.
: Zoek "Canon PRINT" in de App Store.
: Zoek "Canon PRINT" in Google Play.
Of ga naar de Canon-website door de QR-code te scannen.
* Verbind uw smartphone niet draadloos met internet terwijl de printer rechtstreeks met de smartphone is verbonden.
In dat geval kunnen kosten in rekening worden gebracht, afhankelijk van uw contract met uw telefoonaanbieder.
* Er kunnen maximaal 5 apparaten rechtstreeks via een draadloze LAN-verbinding met de printer worden verbonden.
2
Controleer het scherm van de printer.
Het scherm wordt uitgeschakeld als er gedurende ongeveer 10 minuten geen handelingen plaatsvinden. Als u het
scherm wilt weergeven, tikt u op het aanraakscherm.
Als het volgende scherm wordt weergegeven:
Controleer het pictogram linksonder en ga verder
met
of .
Als wordt weergegeven, kan de printer niet
communiceren via een draadloze LAN-verbinding.
Ga voor meer informatie naar "http://ij.start.canon"
en lees de Veelgestelde vragen.
Als het volgende scherm wordt weergegeven:
Ga verder met
.
Nee (ga verder met
).
JA
aTik op de geïnstalleerde toepassing.
bVolg de instructies op het scherm om de printer
te registreren.
cControleer of het volgende scherm wordt weergegeven.
De verbinding met de smartphone
is nu voltooid. U kunt afdrukken vanaf
uw smartphone.
Als u foto's wilt afdrukken, plaatst u fotopapier.
Ga verder met "Fotopapier plaatsen" op pagina 8.
Het volgende pictogram wordt weergegeven.
(De printer is verbonden met een netwerk.)
7
NEDERLANDS
De onderstaande procedures zijn van toepassing op iOS of Android. Selecteer uw besturingssysteem
en ga verder naar de desbetreffende procedure.
aTik op Instellingen (Settings) op het beginscherm
van uw smartphone en tik op Canon_ij_XXXX bij
de instellingen voor Wi-Fi.
Als Canon_ij_XXXX niet wordt weergegeven in de
lijst, raadpleegt u "De printer voorbereiden" hieronder
om de printer te bedienen en herhaalt u stap a.
bTik op de geïnstalleerde toepassing.
cVolg de instructies op het scherm om de printer
te registreren.
Volg de instructies op het scherm om door
te gaan met de installatie.
Als u Verb.methode autom. selecteren (aanbev.) (Auto
Select Conn. Method (recommended)) selecteert in het
selectiescherm voor de verbindingsmethode, wordt de
juiste verbindingsmethode automatisch geselecteerd op
basis van uw omgeving.
dControleer of het volgende scherm wordt weergegeven.
aTik op de geïnstalleerde toepassing.
bVolg de instructies op het scherm om de printer
te registreren.
Als het bericht "Printer is niet geregistreerd.
Printerinstallatie uitvoeren? (Printer is not
registered. Perform printer setup?)" niet wordt
weergegeven, raadpleegt u "De printer voorbereiden"
hieronder om de printer te bedienen en wacht u
daarna even tot het bericht wordt weergegeven.
Volg de instructies op het scherm om door
te gaan met de installatie.
De juiste verbindingsmethode voor uw omgeving
wordt geselecteerd.
Als er twee printernamen worden weergegeven
op het scherm Printer registreren (Register
Printer), zoals hieronder, selecteert u A.
A) TS8100 series (xxx.xxx.xxx.xxx)
B) Direct-xxxx-TS8100series
cControleer of het volgende scherm wordt weergegeven.
De verbinding met de smartphone is nu voltooid. U kunt afdrukken vanaf uw smartphone.
Als u foto's wilt afdrukken, plaatst u fotopapier. Ga verder met "Fotopapier plaatsen" op pagina 8.
aSelecteer
op het aanraakscherm van
de printer.
bSelecteer het pictogram linksonder op het HOME-
scherm.
cSelecteer Nee (No) als het volgende scherm wordt
weergegeven.
dSelecteer LAN-instell. (LAN settings) > Draadloos
LAN (Wireless LAN) > Draadloos LAN instellen
(Wireless LAN setup) > Eenv. draadloos verbinden
(Easy wireless connect) in deze volgorde.
eSelecteer Ja (Yes).
fGa verder met de bediening van uw smartphone.
De printer voorbereiden
5
ITALIANO
Utilizzo del CD-ROM di installazione (solo Windows)
aCaricare il CD-ROM di installazione nel computer.
Quando si utilizza Windows 10 o Windows 8.1:
bQuando il seguente messaggio viene visualizzato
nella parte destra dello schermo del computer,
fare clic sul messaggio.
cSe viene visualizzata questa schermata, fare clic
su Esegui Msetup4.exe (Run Msetup4.exe).
dSe viene visualizzata la nestra di dialogo
Controllo account utente (User Account
Control), fare clic su Sì (Yes).
Quando non viene visualizzato questo messaggio
(o il messaggio è scomparso)
1. Fare clic su File Explorer sulla barra delle applicazioni.
o
2. Fare clic su Questo PC (This PC) sul lato sinistro
della nestra visualizzata.
3. Fare doppio clic
sull'icona del CD-ROM sul lato
destro della nestra.
Se viene visualizzato il contenuto del CD-ROM, fare
doppio clic su Msetup4.exe.
4. Passare al punto d.
Quando si utilizza Windows 7:
b Quando viene visualizzata la schermata Riprod.
automatica (AutoPlay), fare clic su Esegui
Msetup4.exe (Run Msetup4.exe).
c Se viene visualizzata la nestra di dialogo
Controllo account utente (User Account
Control), fare clic su Continua (Continue).
Quando non viene visualizzata la schermata Riprod.
automatica (AutoPlay)
1. Fare clic su Computer nel menu di avvio.
2. Fare doppio clic
sull'icona del CD-ROM sul lato
destro della nestra aperta.
Se viene visualizzato il contenuto del CD-ROM, fare
doppio clic su Msetup4.exe.
Passare al punto per continuare.
2
Fare clic su Avvia impostazione
(Start Setup).
La connessione con il computer è ora completata. È possibile stampare dal computer.
Se viene visualizzata questa schermata,
fare clic su Esci (Exit).
Seguire le istruzioni a
video per procedere con
l'impostazione.
8
1
Aprire il coperchio del vassoio posteriore
ed estrarre il supporto per la carta.
2
aAprire il coperchio dell'alimentatore
manuale.
bFar scorrere la guida della carta di destra
no all'estremità.
a
b
3
aCaricare diversi fogli di carta fotograca
con il lato di stampa rivolto verso l'alto.
bFar scorrere la guida della carta di destra
per allinearla con il lato della pila di carta.
a
b
4
Chiudere il coperchio dell'alimentatore manuale.
Leggere il messaggio sullo schermo della stampante
e registrare le informazioni della carta caricata.
1
Assicurarsi che la stampante sia accesa.
2
Caricare diversi fogli di carta fotograca.
3
Inserire la scheda di memoria nello slot della
scheda.
4
Selezionare le foto da stampare.
5
Toccare il pulsante Colore (Color).
La stampante inizia a stampare.
Caricamento di carta fotograca
Stampa di foto salvate su scheda di memoria
È possibile stampare facilmente foto salvate su una scheda di memoria.
Caricare la carta fotograca nel vassoio posteriore.
1
PORTUGUÊS
1. Vericando os itens incluídos
CD-ROM de instalação
para PC com Windows
Cabo de alimentação
Informações Importantes
e Sobre Segurança
Cartuchos de tinta
para conguração
Para Começar (este manual)
2. Removendo os materiais
de embalagem/ligando
a impressora
Quando a impressão começa, o painel de controle
levanta-se automaticamente e a bandeja de saída do
papel sai. Não coloque objetos na frente da impressora.
1
Remova todos os materiais de embalagem (como
a ta laranja e o lme de proteção da tela sensível
ao toque) da parte externa da impressora.
Usar a impressora com o lme de proteção pode
ocasionar problemas de funcionamento.
2
aEncaixe seus dedos nas cavidades laterais da
impressora e abra a unidade de digitalização/
tampa.
bRemova a ta laranja.
b
a
3
LEVANTE a unidade de digitalização/tampa
e abaixe-a em seguida.
4
Conecte o cabo de alimentação na diagonal
a partir da parte de trás.
Parte traseira
Não conecte os cabos ainda, exceto o cabo
de alimentação.
5
Levante o painel de controle e aperte o botão
ATIVADO (ON).
6
Arraste a tela e toque em um idioma para
selecioná-lo.
7
Leia as mensagens e siga as instruções na tela.
Para obter detalhes sobre as informações enviadas
para a Canon, consulte "Enviando dados à Canon"
em Informações Importantes e Sobre Segurança.
8
Selecione OK.
3. Instalando o cartucho
de tinta
1
Abra a unidade de digitalização/tampa.
Não toque no suporte da cabeça de impressão
(A) antes de ele parar.
(A)
2
2
aRemova COMPLETAMENTE a ta laranja.
bRetire a película de proteção.
a
b
3
Puxe a aba laranja CUIDADOSAMENTE.
Não empurre as laterais do cartucho
de tinta se a saída de ar em forma
de Y estiver bloqueada.
Não toque.
4
Insira o cartucho de tinta na cabeça de impressão
e empurre-o para baixo até que ele se encaixe
no lugar.
A cor do cartucho de tinta que você denir será
exibida na tela.
Se a cor não for exibida na tela mesmo que você
tenha instalado o cartucho de tinta, a cor do cartucho
de tinta pode estar errada ou você pode ter instalado
um cartucho de tinta que não é suportado por esta
impressora, como com um número do modelo
diferente. Instale um cartucho de tinta para a cor correta
ou use o cartucho de tinta fornecido para conguração.
5
Instale todos os cartuchos de tinta da mesma
forma que na etapa 4 e conrme se todas as
cores são exibidas na tela.
6
LEVANTE a unidade de digitalização/tampa
e abaixe-a em seguida.
Se uma mensagem de erro for exibida na tela,
verique se os cartuchos de tinta estão instalados
corretamente.
4. Colocando papel/alinhando
a cabeça de impressão
Para obter um resultado de impressão melhor, imprima
e digitalize um padrão para Alinhamento da cabeça
de impressão (Print Head Alignment).
1
aPuxe o cassete para fora.
bRemova a tampa do cassete.
a
b
2
Abra as guias do papel e posicione-as
na marcação LTR ou A4.
3
PORTUGUÊS
3
aColoque papel tamanho LTR ou A4 comum
com o lado a ser impresso voltado para baixo.
bDeslize a guia do papel direita para alinhá-la
à pilha de papel.
cAlinhe a pilha de papel com a guia do papel
frontal.
a
b
c
4
Coloque a tampa do cassete e insira o cassete.
A gura a seguir mostra o estado depois que
o cassete foi inserido.
Lado
5
Se a tela a seguir for exibida, selecione OK.
A bandeja de saída do papel sai automaticamente.
6
Verique se um padrão é impresso para Alinhamento
da cabeça de impressão (Print Head Alignment).
A impressão leva cerca de 4 minutos para ser concluída.
7
aAbra a tampa de documentos.
bColoque o padrão impresso no vidro
de exposição.
a
b
8
Depois de fechar a tampa de documentos,
selecione OK.
9
Se a tela a seguir for exibida, selecione OK.
Se a ta laranja permanecer na bandeja de saída
de papel, remova-a.
5
PORTUGUÊS
Usando o CD-ROM de instalação (somente Windows)
aInsira o CD-ROM de instalação no computador.
Ao usar Windows 10 ou Windows 8.1:
bClique na mensagem a seguir quando ela for
exibida no lado direito da tela do computador.
cSe a tela a seguir for exibida, clique em Executar
Msetup4.exe (Run Msetup4.exe).
dSe a caixa de diálogo Controle de Conta
de Usuário (User Account Control) for exibida,
clique em Sim (Yes).
Quando esta mensagem não aparecer
(ou tiver desaparecido)
1. Clique em Explorador de Arquivos (File Explorer)
na barra de ferramentas.
ou
2. Clique em Este PC (This PC) no lado esquerdo
da janela aberta.
3. Clique duas vezes no ícone do CD-ROM
no lado
direito da janela.
Se o conteúdo do CD-ROM aparecer, clique duas
vezes em Msetup4.exe.
4. Prossiga para a etapa d.
Ao usar Windows 7:
b Quando a tela Reprodução Automática
(AutoPlay) for exibida, clique em Executar
Msetup4.exe (Run Msetup4.exe).
c Se a caixa de diálogo Controle de Conta
de Usuário (User Account Control) for exibida,
clique em Continuar (Continue).
Quando a tela Reprodução Automática (AutoPlay)
não for exibida
1. Clique em Computador (Computer) no menu Iniciar.
2. Clique duas vezes no ícone do CD-ROM
no lado
direito da janela aberta.
Se o conteúdo do CD-ROM aparecer, clique duas
vezes em Msetup4.exe.
Siga para a etapa para continuar.
2
Clique em Iniciar conguração
(Start Setup).
Se a seguinte tela for exibida,
clique em Sair (Exit).
A conexão com o computador foi concluída. Você já pode imprimir usando o computador.
Siga as instruções na
tela para prosseguir com
a conguração.
6
6-B. Conectando a um smartphone
Você precisará congurar uma conexão para cada smartphone. Comece a conguração de cada smartphone pela etapa 1.
Preparação
Ative o Wi-Fi em seu smartphone.
Se você tiver um roteador sem o, conecte seu smartphone ao roteador sem o que você deseja conectar à impressora.
* Para obter informações sobre operações, consulte os manuais do seu smartphone e do seu roteador sem o ou entre
em contato com seus respectivos fabricantes.
1
Instale o software aplicativo Canon PRINT Inkjet/SELPHY em seu smartphone.
: Pesquise por "Canon PRINT" na App Store.
: Pesquise por "Canon PRINT" no Google Play.
Ou acesse o site da Canon digitalizando o código QR.
* Não é possível conectar seu smartphone à Internet por meio de uma conexão sem o se a impressora estiver diretamente
conectada ao seu smartphone. Nesse caso, você poderá ser cobrado dependendo do contrato com seu provedor de serviço.
* Até 5 dispositivos podem ser diretamente conectados à impressora por meio de uma conexão de LAN sem o.
2
Verique a tela da impressora.
A tela desliga quando nenhuma operação é realizada por cerca de 10 minutos. Toque na tela sensível ao toque
para exibir a tela.
Se a tela a seguir for exibida:
Verique o ícone no canto inferior esquerdo
e prossiga para
ou .
Se for exibido, a impressora não poderá se
comunicar por meio de uma conexão de LAN sem
o. Para obter detalhes, acesse "http://ij.start.canon"
e consulte a seção Perguntas Frequentes.
Se a tela a seguir for exibida:
Prossiga para
.
Não (Prossiga para
.)
SIM
aToque no software aplicativo instalado.
bSiga as instruções na tela para registrar a impressora.
cCertique-se de que a tela a seguir seja exibida.
A conexão com seu smartphone
foi concluída. Você já pode imprimir
usando seu smartphone.
Para imprimir fotos, coloque papel fotográco. Prossiga
para "Colocando papel fotográco" na página 8.
O seguinte ícone é exibido.
(A impressora está conectada a uma rede.)
7
PORTUGUÊS
Os procedimentos descritos abaixo podem variar para iOS e Android. Selecione seu sistema operacional
e continue com o procedimento.
aToque em Congurações (Settings) na tela inicial
do seu smartphone e depois em Canon_ij_XXXX
nas congurações de Wi-Fi.
Se Canon_ij_XXXX não estiver na lista, consulte
a seção "Preparação para a impressora" abaixo
para operar a impressora e repita a etapa a.
bToque no software aplicativo instalado.
cSiga as instruções na tela para registrar a impressora.
Siga as instruções na tela para prosseguir com
a conguração.
Se você selecionar Sel. Conexão auto. Método
(recomendado) (Auto Select Conn. Method
(recommended)) na tela de seleção do método
de conexão, o método de conexão será selecionado
automaticamente de acordo com o seu ambiente.
dCertique-se de que a tela a seguir seja exibida.
aToque no software aplicativo instalado.
bSiga as instruções na tela para registrar a impressora.
Se a mensagem "A impressora não está
registrada. Executar conguração da impressora?
(Printer is not registered. Perform printer setup?)"
não for exibida, consulte a seção "Preparação para
a impressora" abaixo para operar a impressora
e aguarde até que a mensagem seja exibida.
Siga as instruções na tela para prosseguir com
a conguração.
O método de conexão apropriado é selecionado
de acordo com o seu ambiente.
Se forem exibidos dois nomes de impressora
na tela Registrar impressora (Register Printer)
como mostrado abaixo, selecione A.
A) TS8100 series (xxx.xxx.xxx.xxx)
B) Direct-xxxx-TS8100series
cCertique-se de que a tela a seguir seja exibida.
A conexão com seu smartphone foi concluída. Você já pode imprimir usando
seu smartphone.
Para imprimir fotos, coloque papel fotográco. Prossiga para "Colocando papel fotográco" na página 8.
aSelecione
na tela sensível ao toque
da impressora.
bSelecione o ícone no canto inferior esquerdo
da tela INÍCIO.
cSe a tela a seguir for exibida, selecione Não (No).
dSelecione Congs. LAN (LAN settings) > LAN
sem-o (Wireless LAN) > Conguração de LAN
s/ o (Wireless LAN setup) > Conexão sem o
Easy (Easy wireless connect), nesta ordem.
eSelecione Sim (Yes).
fRetorne para a operação com seu smartphone.
Preparação para a impressora
8
1
Abra a tampa da bandeja traseira e puxe
o suporte de papel para fora.
2
aAbra a tampa do slot de alimentação.
bDeslize a guia do papel direita até o nal.
a
b
3
aColoque várias folhas de papel fotográco
com o lado a ser impresso voltado para cima.
bDeslize a guia do papel direita para alinhá-la
à pilha de papel.
a
b
4
Feche a tampa do slot de alimentação.
Leia a mensagem exibida na tela da impressora
e registre as informações do papel carregado.
1
Verique se a impressora está ligada.
2
Coloque várias folhas de papel fotográco.
3
Insira o cartão de memória no slot de cartão.
4
Selecione as fotos a serem impressas.
5
Toque no botão Colorido (Color).
A impressora começa a imprimir.
Colocando papel fotográco
Imprimindo as Fotos Salvas no Cartão de Memória
Imprima as fotos salvas em um cartão de memória de forma fácil.
Coloque o papel fotográco na bandeja traseira.
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

canon-pixma-ts8150
  • Mein Drucker blockiert komplett und nichts geht mehr. Ich sehe nur noch die Fehlermeldung eines Papierstaus, was aber definitiv nicht der Fall ist. Wie mache ich beim canon pixma TS8150 ein reset? Eingereicht am 16-7-2024 11:25

    Antworten Frage melden
  • Wo befindet sich der Resetknopf bei PixmaTS8150
    MfG
    Doris Fiedler Eingereicht am 11-2-2024 23:33

    Antworten Frage melden
  • Suche eine Anleitung wie man an den Schlauch rankommt der in den reinigungsfilz läuft. Drucker Canon Pixma Ts 8150 Eingereicht am 16-11-2023 11:07

    Antworten Frage melden
  • Fehlercode 1259
    Kassette mit Papier ist ordnungsgemäß gefüllt
    Wie kann ich das Papierausgabefach herausziehen ? Eingereicht am 27-8-2023 14:34

    Antworten Frage melden
  • Wie stellt man bei Pixma TS8150 den hinteren Papiereinzug an


    Eingereicht am 2-4-2023 13:48

    Antworten Frage melden
  • Drucker druckt unklar. Wie kann ich das beseitigen Eingereicht am 4-1-2023 12:34

    Antworten Frage melden
  • Anzeige: Das Bedienfeld ist Geschlossen, öffnen Sie das Bedienfeld, Was muß ich tun ? Eingereicht am 6-12-2021 11:41

    Antworten Frage melden
  • Wie komme ich an den reinigungsschlauch canon pixma ts 8150 Eingereicht am 26-9-2021 19:48

    Antworten Frage melden
  • Ich möchte eine Doppelkarte zum Geburtstag Machen Eingereicht am 19-11-2020 15:43

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon Pixma TS8150 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Canon Pixma TS8150

Canon Pixma TS8150 Bedienungsanleitung - Deutsch - 506 seiten

Canon Pixma TS8150 Bedienungsanleitung - Englisch - 484 seiten

Canon Pixma TS8150 Bedienungsanleitung - Holländisch - 499 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info