Bedienungsanleitung Canon Powershot A 100 (Seite 11 von 61) (Englisch)

100474

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

2120

Never mix unused and partially used batter-

ies. Always load two fresh (or fully recharged)

batteries at the same time.

Never mix batteries of different types or from

different manufactures. Both batteries should

be identical.

Before inserting the batteries, wipe the

battery terminals well with a dry cloth. Oil from

one’s skin or other dirt may cause a consid-

erable reduction in the number of recordable

images or reduced usage time.

Before using the camera, wipe the and

terminals in the camera well with a dry cloth.

Dirt may cause a bad electrical contact.

Battery performance deteriorates at low

temperatures (especially with alkaline

batteries). If you are using the camera in cold

areas and batteries are running down faster

than they should, you may be able to restore

performance by placing batteries in an inner

pocket to warm them up prior to use. But be

careful that you don’t put the batteries into a

pocket together with a metal key chain or

other metallic objects, as these objects may

cause batteries to short-circuit.

Proper Battery Handling

Use AA-size Alkaline or Canon AA-size NiMH

batteries only. Refer to "Using Rechargeable

Batteries" (p. 96) for their handling.

Never use manganese or lithium batteries,

as these battery types may overheat in the

camera.

Since the performance of alkaline batteries

may differ according to brand, the operating

time of the batteries you purchase may not

be as long as the batteries that came with

the camera.

Camera operating time may shorten at low

temperatures when alkaline batteries are

used. Also due to their specifications,

alkaline batteries may expire faster than

NiMH batteries. If you are using the camera

in cold areas or for a long time, we

recommend using Canon AA-size NiMH

Battery Kit.

While it is possible to use AA-size nickel-

cadmium batteries, performance is unreliable

and their use is not recommended.

● Preparing the Camera ●

Insert the CF card as shown and

close the CF card slot / battery cover.

Slide the CF card firmly to the end. To release

the CF card, hold onto it and remove.

When the camera's indicator flashes green, do

not turn off the power or open the battery cover.

The camera is writing, reading, erasing or trans-

mitting an image to or from the CF card. Do not

perform the following operations as recorded

images may be damaged as a result.

• Turn the camera off

• Open the cover

• Shake the camera

Be aware that use of CF cards whose contents

have been edited on another camera or with

another company’s software may cause the

camera to operate incorrectly.

We recommend that you use the optional AC

Adapter Kit ACK800 to power the camera

during long usage sessions (p. 99).

The optional battery charger kit lets you use

rechargeable NiMH batteries to power the

camera (p. 96).

For information about the Battery and

Charger Kit and AA-size rechargeable NiMH

batteries, see the System Map (separate

from this guide).

For important information, see “Battery

Performance” (p. 109) and “CF Cards and

Estimated Capacities (Recordable Images)”

(p. 110).

● Preparing the Camera ●

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Powershot A 100 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info