Bedienungsanleitung Canon Powershot A 100 (Seite 49 von 61) (Englisch)

100474

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

9796

This charger can be used only to charge Canon

AA-size NiMH batteries. Please do not attempt

to charge any other type of batteries with this

charger.

Never mix unused batteries together with

batteries that have been used in other devices.

When recharging batteries from the camera,

always recharge both of them at the same time.

Do not mix batteries with different purchase

dates or different charge states.

Do not attempt to recharge fully charged

batteries, as doing so may reduce or impair

battery performance.

Do not recharge batteries in enclosed areas that

tend to retain heat.

Repeatedly recharging batteries before they

become fully depleted may cause batteries to

lose capacity. Do not recharge the batteries until

the LCD monitor displays the “Change the

batteries” message.

Wipe the battery terminals well with a dry cloth

in the following situations, as the terminals may

be soiled with oil from one’s skin or other dirt:

- If the battery usage time has considerably di-

minished

- If the number of recordable images has consid-

erably diminished

- When charging the batteries (insert and remove

the batteries two or three times before charg-

ing)

- When charging completes in a matter of a few

minutes (the battery charger indicator remains

lit)

Always keep the and terminals of batter-

ies, battery charger and camera clean. Dirt may

cause a bad electrical contact. Wipe them well

with a dry cloth before recharging or using them.

You may not be able to fully charge the batter-

ies due to their specifications right after pur-

chase or after long periods of non-use. If this

happens, use the batteries until their charge is

depleted before charging them again. After do-

ing this several times, battery performance will

be restored.

If battery usage time is considerably low de-

spite their terminals’ being wiped and the bat-

tery charger’s indicator remaining lit, it is pos-

sible that the batteries have reached the end of

their lifespan. Switch to different, unused bat-

teries. If you are purchasing new batteries, look

for Canon’s AA-size NiMH batteries.

● Appendices ●

Insert the new date battery into the

holder with the (+) side facing up.

Replace the date battery holder back

into its original position.

Set the date and time when the Set

Date / Time menu is displayed on the

LCD monitor (p. 24).

The LCD monitor also displays the Set Date /

Time menu the very first time you turn on the

camera. This is normal, and you don’t need

to replace the date battery.

If you should dispose of your cam-

era, first remove the date battery

for recycling according to the recy-

cling system of your country.

Using the Optional Battery Kits

Using Rechargeable Batteries

(Battery and Charger Kit CBK100)

Indicator

* Two batteries can be charged instead of four.

Four batteries are supplied with the Battery

and Charger Kit CBK100, however, only two

batteries are used for this camera.

The indicator flashes while charging, then

comes on solid when charging is finished.

● Appendices ●

Bij dit produkt zijn batterijen

geleverd. Wanneer deze leeg

zijn, moet u ze niet weggoolen

maar inleveren als KCA

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Powershot A 100 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info