50213
128
Zoom out
Zoom in
Vorherige Seite
1/144
Nächste Seite
126 Appendices
Problem Cause Solution
Main dial is not turned to
.
Battery life exceeded
Poor contact between
camera and compact
power adapter
Camera moved
Autofocus function
hampered by obstruction
to AF auxiliary light emitter
Subject out of focal range
Insufficient light for
shooting
Subject dark in comparison
to the background
Subject too far for flash to
reach
Subject too close
Subject bright in
comparison to the
background
Light shining directly on
subject or reflected off
subject into camera
Flash set to On
Flash set to Off
Incorrect video system
setting
Mode dial is turned to .
Zoom lever was pressed
while shooting in movie
mode.
Turn the main dial to .
Replace the battery pack with a new one.
Plug the compact power adapter's DC plug more firmly
into the camera's DC IN terminal.
Connect the power cord to the compact power adapter
and insert its plug firmly into the electrical outlet.
Be careful not to move the camera when pressing the
shutter button.
Be careful not to block the AF auxiliary light emitter with
your finger or other items.
Ensure that there is at least 70 cm (2.3 ft.) between the
camera lens and subject.
Use the macro mode to shoot close-ups between 6 and
70 cm (2.4 in. and 2.3 ft.) at maximum wide angle and
20 and 70 cm (7.9 in. and 2.3 ft.) at maximum
telephoto.
Set the built-in flash to on.
Use a high-output externally mounted flash.
Set the exposure compensation to a positive (+) setting.
Use the AE lock or spot metering function.
To use the built-in flash, shoot within 70 cm to 4.5 m
(2.3 to 14.8 ft.) of the subject at the maximum wide
angle and within 70 cm to 3.6 m (2.3 to 11.8 ft.) at the
maximum telephoto setting.
Use an externally mounted flash with a large output.
If you are using a flash, adjust the flash output with the
flash exposure compensation function (p. 68).
Set the exposure compensation to a negative (-) setting.
Use the AE lock or spot metering function.
Change the shooting angle.
Set the flash to Auto or Off.
Set the flash to Auto or On.
Set the video system to the appropriate setting, NTSC or
PAL, for your TV (See Set up Menu, p. 105).
Turn the mode dial to any shooting mode except for .
Operate the zoom before shooting in movie mode.
Battery pack
will not charge
Image is
blurred, out of
focus, or not
as expected
Subject is too
dark
Subject is too
bright
Flash will not
fire
Image not
showing on TV
Zoom does not
operate
128

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon Powershot G1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info