Bedienungsanleitung Canon PowerShot Pick (Seite 18 von 154) (Englisch)

809441

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

Handling Precautions

Camera care

This camera is a precision instrument. Do not drop it or subject it to physical shock.

The camera is not waterproof and cannot be used underwater.

Use a blower brush to remove dust from the dome cover.

Wipe off any smudges or fingerprints on the dome cover with a commercially available

eyeglass cloth (microfiber). After cleaning, take some shots to make sure they are not

blurry from smudges.

If water gets on the camera, wipe it off with a dry and clean cloth. If dirt, dust, or salt gets

on the camera, wipe it off with a clean, well-wrung wet cloth.

Using the camera in dusty or dirty locations may lead to damage.

Cleaning the camera after use is recommended. Allowing dirt, dust, water, or salt to

remain on the camera may cause a malfunction.

If you accidentally drop the camera into water or are concerned that moisture (water),

dirt, dust, or salt may have gotten inside it, promptly consult the nearest Canon Service

Center.

Never leave the camera near anything having a strong magnetic field such as a magnet

or electric motor. Also, avoid using or leaving the camera near anything emitting strong

radio waves, such as a large antenna. Strong magnetic fields can cause camera

malfunction or destroy image data.

Do not leave the camera in excessive heat, such as in a car in direct sunlight. High

temperatures can cause the camera to malfunction.

The camera contains precision electronic circuitry. Never attempt to disassemble the

camera yourself.

Condensation may form on the camera or internal parts if you bring the camera

somewhere much hotter or colder. To prevent condensation, seal the camera in a plastic

bag before bringing it where the temperature is much different, and then let it adjust to

the temperature before removing it from the bag.

If condensation forms on the camera, to avoid damage, do not use the camera or

remove the card. Turn the camera off and wait until the moisture has fully evaporated

before resuming use. Even after the camera is completely dry, if it is still internally cold,

do not remove the card until the camera has adjusted to the ambient temperature.

Condensation may form inside the dome cover if you bring the camera somewhere

humid. Keep the camera off until the moisture has evaporated before use.

If the camera will not be used for an extended period, store it in a cool, dry, well-

ventilated location. Check operation occasionally while it is being stored.

Avoid storing the camera where there are chemicals that result in rust and corrosion

such as in a chemical lab.

If the camera has not been used for an extended period, test all its functions before

using it. If you have not used the camera for some time or if there is an important shoot

such as a foreign trip coming up, have the camera checked by your nearest Canon

Service Center or check the camera yourself and make sure it is working properly.

If there is a bright light source inside or outside the image area, ghosting may occur.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon PowerShot Pick Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon PowerShot Pick

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info