Bedienungsanleitung Canon Powershot Pro90 IS (Seite 8 von 140) (Englisch)

52999

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

6 Read This First

• Do not use substances containing alcohol, benzene, thinners or other flammable

substances to clean or maintain the equipment. The use of these substances may lead

to fire.

• Do not cut, damage, alter or place heavy items on the power adapter cord. Any of these

actions may cause an electrical short circuit, which may lead to fire or electrical shock.

Replace a broken or damaged power adapter cord.

• Do not handle the power cord if your hands are wet. Handling it with wet hands may

lead to electrical shock. When unplugging the cord, ensure that you hold the solid

portion of the plug. Pulling on the flexible portion of the cord may damage or expose the

wire and insulation, creating the potential for fires or electrical shocks.

• Use of power sources not expressly recommended for this equipment may lead to

overheating, distortion of the equipment, fire, electrical shock or other hazards. Use

only the recommended power accessories.

• Always turn off the computer and unplug the camera from the DC plug before

attaching or detaching any interface cables (except for USB cables). The cables carry

high-voltage currents and there is a risk of electrical shock.

• Do not place the batteries near a heat source or expose them to direct flame or heat.

Neither should you immerse them in water. Such exposure may damage the batteries and

lead to the leakage of corrosive liquids, fire, electrical shock, explosion or serious injury.

• Do not attempt to disassemble, alter or apply heat to the batteries. There is serious risk

of injury due to an explosion. Immediately flush with water any area of the body -

including the eyes and mouth, or clothing - that comes into contact with the inner

contents of a battery. If the eyes or mouth contact these substances, immediately flush

with water and seek medical assistance.

• Avoid dropping or subjecting the batteries to severe impacts that could damage the

casings. It could lead to leakage and injury.

• Do not short-circuit the battery terminals with metallic objects, such as key holders. It

could lead to overheating, burns and other injuries. Use the supplied terminal cover to

transport or store the battery pack.

• Before you discard a battery, cover the terminals with tape or other insulators to

prevent direct contact with other objects. Contact with the metallic components of

other materials in waste containers may lead to fire or explosions. Discard the batteries

in specialized waste facilities if available in your area.

• Use of batteries not expressly recommended for this equipment may cause explosions

or leaks, resulting in fire, injury and damage to the surroundings. Use only

recommended batteries and accessories.

• Disconnect the compact power adapter from both the camera and electrical outlet after

recharging and when the camera is not in use to avoid fires and other hazards. Continuous

use over a long period of time may cause the unit to overheat and distort, resulting in fire.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Powershot Pro90 IS Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info