561332
1
Zoom out
Zoom in
Vorherige Seite
1/120
Nächste Seite
1
ENGLISH
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Camera User Guide
©CANON INC. 2014 CDD-E601-010
Make sure you read this guide, including the “Safety Precautions”
(
=
11) section, before using the camera.
Reading this guide will help you learn to use the camera properly.
Store this guide safely so that you can use it in the future.
Click the buttons in the lower right to access other pages.
: Next page
: Previous page
: Page before you clicked a link
To jump to the beginning of a chapter, click the chapter title at right.
2
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Initial Information
Package Contents
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Camera
Battery Pack
NB-11LH*
Battery Charger
CB-2LF/CB-2LFE
Wrist Strap
Lens Cap
(with cord)
* Do not peel off the battery pack label.
Printed matter is also included.
A memory card is not included (
=
2).
Before Use
Compatible Memory Cards
The following memory cards (sold separately) can be used, regardless of
capacity.
SD memory cards*
SDHC memory cards*
SDXC memory cards*
Eye-Fi cards
* Cards conforming to SD standards. However, not all memory cards have been
veried to work with the camera.
About Eye-Fi Cards
This product is not guaranteed to support Eye-Fi card functions (including
wireless transfer). In case of an issue with an Eye-Fi card, please check
with the card manufacturer.
Also note that an approval is required to use Eye-Fi cards in many
countries or regions. Without approval, use of the card is not permitted.
If it is unclear whether the card has been approved for use in the area,
please check with the card manufacturer.
3
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Part Names and Conventions in This
Guide
(
3
)
(
6
)
(
8
) (
9
)
(
7
)
(
1
) (
2
) (
3
) (
4
) (
5
)
(1) Zoom lever
Shooting: [
(telephoto)] /
[
(wide angle)]
Playback: [
(magnify)] /
[
(index)]
(2) Shutter button
(3) Strap mount
(4) Power button
(5) Flash
(6) Lamp
(7) Lens
(8) Tripod socket
(9) Memory card/battery cover
Preliminary Notes and Legal
Information
Take and review some test shots initially to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries
and afliates, and its distributors are not liable for any consequential
damages arising from any malfunction of a camera or accessory,
including memory cards, that result in the failure of an image to be
recorded or to be recorded in a way that is machine readable.
Images recorded by the camera shall be for personal use. Refrain
from unauthorized recording that infringes on copyright law, and note
that even for personal use, photography may contravene copyright
or other legal rights at some performances or exhibitions, or in some
commercial settings.
The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Canon Customer Support Help Desk.
Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet
design specications, in rare cases some pixels may be defective
or may appear as red or black dots. This does not indicate camera
damage or affect recorded images.
The LCD monitor may be covered with a thin plastic lm for protection
against scratches during shipment. If covered, remove the lm before
using the camera.
When the camera is used over an extended period, it may become
warm. This does not indicate damage.
4
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Shooting modes and on-screen icons and text are indicated in
brackets.
: Important information you should know
: Notes and tips for expert camera use
=
xx: Pages with related information (in this example, “xx” represents
a page number)
Instructions in this guide apply to the camera under default settings.
For convenience, all supported memory cards are simply referred to as
the “memory card”.
The symbols “
Still Images” and “ Movies” below titles indicate
how the function is used—whether for still images or movies.
(
8
)
(
9
)
(
11
)
(
12
)
(
13
)
(
1
) (
6
) (
7
)
(
5
)
(
4
) (
15
)(
14
) (
16
)
(
3
)(
2
)
(
10
)
(1) Speaker
(2) Microphone
(3) AV OUT (Audio/video output) /
DIGITAL terminal
(4) Screen (LCD monitor)
(5) DC coupler cable port
(6) Indicator
(7) [
(Playback)] button
(8) Movie button
(9) [
(Auto)] button
(10) [
(Exposure compensation)] /
Up button
(11) FUNC./SET button
(12) [
(Flash)] / Right button
(13) [
(Self-timer)] / [ (Single-image
erase)] / Down button
(14) [
(Focusing range)] / Left button
(15) [
(Display)] button
(16) [
] button
In this guide, icons are used to represent the corresponding camera
buttons on which they appear, or which they resemble.
The following camera buttons and controls are represented by icons.
[
] Up button (10) on back
[ ] Left button (14) on back
[ ] Right button (12) on back
[ ] Down button (13) on back
5
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Advanced Guide
1 Camera Basics ........................................................... 22
On/Off ..................................................................................... 22
Power-Saving Features (Auto Power Down) ............................. 23
Power Saving in Shooting Mode ...........................................23
Power Saving in Playback Mode ........................................... 23
Shutter Button ........................................................................ 23
Shooting Display Options ....................................................... 24
Using the FUNC. Menu .......................................................... 24
Using the Menu Screen .......................................................... 25
Indicator Display ..................................................................... 26
Clock ...................................................................................... 27
2 Auto Mode .................................................................. 28
Shooting with Camera-Determined Settings .......................... 28
Shooting (Smart Auto) ...............................................................28
Still Images/Movies ...............................................................30
Still Images ............................................................................ 30
Movies ...................................................................................30
Scene Icons ............................................................................... 31
Image Stabilization Icons ...........................................................32
On-Screen Frames ....................................................................32
Common, Convenient Features ............................................. 33
Zooming In Closer on Subjects (Digital Zoom) .......................... 33
Using the Self-Timer .................................................................. 33
Using the Self-Timer to Avoid Camera Shake .......................34
Customizing the Self-Timer ...................................................34
Adding a Date Stamp ................................................................35
Continuous Shooting .................................................................35
Image Customization Features .............................................. 36
Changing the Aspect Ratio ........................................................ 36
Table of Contents
Before Use
Initial Information .............................................................. 2
Package Contents .................................................................... 2
Compatible Memory Cards....................................................... 2
About Eye-Fi Cards .....................................................................2
Preliminary Notes and Legal Information ................................. 3
Part Names and Conventions in This Guide ............................ 3
Common Camera Operations ................................................ 10
Safety Precautions ..................................................................11
Basic Guide
Basic Operations............................................................. 14
Initial Preparations.................................................................. 14
Attaching Accessories ...............................................................14
Holding the Camera ...................................................................15
Charging the Battery Pack .........................................................15
Inserting the Battery Pack and Memory Card ............................16
Removing the Battery Pack and Memory Card .....................16
Setting the Date and Time ......................................................... 17
Changing the Date and Time .................................................17
Display Language ...................................................................... 18
Trying the Camera Out ........................................................... 19
Shooting (Smart Auto) ...............................................................19
Viewing ......................................................................................20
Erasing Images .....................................................................21
6
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Adjusting Image Brightness (Exposure Compensation) ............ 50
Locking Image Brightness / Exposure (AE Lock) ......................50
Changing the Metering Method .................................................51
Changing the ISO Speed ...........................................................51
Correcting Image Brightness (i-Contrast) .................................. 52
Image Colors .......................................................................... 52
Adjusting White Balance ............................................................52
Custom White Balance .......................................................... 53
Changing Image Color Tones (My Colors) ................................53
Custom Color.........................................................................54
Shooting Range and Focusing ............................................... 54
Shooting Close-Ups (Macro) .....................................................54
Shooting Distant Subjects (Innity) ............................................55
Digital Tele-Converter ................................................................55
Changing the AF Frame Mode ..................................................55
Center ....................................................................................55
Face AiAF .............................................................................. 56
Choosing Subjects to Focus On (Tracking AF) .....................56
Shooting with Servo AF .........................................................57
Changing the Focus Setting ......................................................57
Shooting with the AF Lock ......................................................... 58
Flash....................................................................................... 58
Changing the Flash Mode .........................................................58
Auto .......................................................................................58
On ..........................................................................................58
Slow Synchro ........................................................................58
Off .......................................................................................... 59
Shooting with the FE Lock ......................................................... 59
Other Settings ........................................................................ 59
Changing the Compression Ratio (Image Quality) .................... 59
Changing Image Resolution (Size) ............................................ 37
Guidelines for Choosing Resolution Based on Paper Size
(for 4:3 Images) .....................................................................37
Red-Eye Correction ...................................................................37
Changing Movie Image Quality .................................................38
Helpful Shooting Features ...................................................... 38
Displaying Grid Lines .................................................................38
Magnifying the Area in Focus ....................................................39
Checking for Closed Eyes .........................................................39
Customizing Camera Operation ............................................. 40
Deactivating the AF-Assist Beam ..............................................40
Deactivating the Red-Eye Reduction Lamp ...............................40
Changing the Image Display Style after Shots .......................... 40
Changing the Image Display Period after Shots ...................40
Changing the Screen Displayed after Shots .........................41
3 Other Shooting Modes .............................................. 42
Brightness / Color Customization (Live View Control) ............ 42
Specic Scenes ...................................................................... 43
Applying Special Effects ......................................................... 44
Shooting with a Fish-Eye Lens Effect (Fish-Eye Effect) ............44
Shots Resembling Miniature Models (Miniature Effect) .............45
Playback Speed and Estimated Playback Time
(for One-Minute Clips) ...........................................................45
Shooting with a Toy Camera Effect (Toy Camera Effect) ...........46
Shooting in Monochrome ...........................................................46
Special Modes for Other Purposes ........................................ 47
Using the Face Self-Timer ......................................................... 47
Shooting Long Exposures (Long Shutter) .................................47
4 P Mode ........................................................................ 49
Shooting in Program AE ([P] Mode) ....................................... 49
Image Brightness (Exposure) ................................................. 50
7
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Tagging Images as Favorites ................................................. 72
Using the Menu .........................................................................72
Editing Still Images ................................................................. 73
Resizing Images ........................................................................73
Cropping ....................................................................................73
Changing Image Color Tones (My Colors) ................................74
Correcting Image Brightness (i-Contrast) .................................. 75
Correcting Red-Eye ...................................................................75
Editing Movies ........................................................................ 76
6 Setting Menu .............................................................. 77
Adjusting Basic Camera Functions ........................................ 77
Silencing Camera Operations ....................................................77
Adjusting the Volume .................................................................77
Hiding Hints and Tips .................................................................78
Date and Time ...........................................................................78
World Clock ...............................................................................78
Lens Retraction Timing .............................................................. 79
Using Eco Mode ........................................................................79
Power-Saving Adjustment .........................................................79
Screen Brightness .....................................................................80
Hiding the Start-Up Screen ........................................................80
Formatting Memory Cards ......................................................... 80
Low-Level Formatting ............................................................ 81
File Numbering ..........................................................................81
Date-Based Image Storage ....................................................... 82
Checking Certication Logos ..................................................... 82
Display Language ...................................................................... 82
Adjusting Other Settings ............................................................ 82
Restoring Defaults ..................................................................... 83
Changing the IS Mode Settings ................................................. 60
Shooting Movies with Subjects at the Same Size Shown
before Shooting .....................................................................60
5 Playback Mode .......................................................... 61
Viewing ................................................................................... 61
Switching Display Modes ...........................................................62
Overexposure Warning (for Image Highlights) ......................62
Histogram ..............................................................................63
Browsing and Filtering Images ............................................... 63
Navigating through Images in an Index ..................................... 63
Finding Images Matching Specied Conditions .........................64
Image Viewing Options .......................................................... 65
Magnifying Images ....................................................................65
Viewing Slideshows ................................................................... 65
Changing Slideshow Settings ................................................66
Auto Playback of Related Images (Smart Shufe) ....................66
Protecting Images .................................................................. 67
Using the Menu .........................................................................67
Choosing Images Individually .................................................... 67
Selecting a Range .....................................................................68
Protecting All Images at Once ...................................................69
Clearing All Protection at Once .............................................69
Erasing Images ...................................................................... 69
Erasing Multiple Images at Once ...............................................69
Choosing a Selection Method ...............................................69
Choosing Images Individually ................................................70
Selecting a Range .................................................................70
Specifying All Images at Once ...............................................70
Rotating Images ..................................................................... 71
Using the Menu .........................................................................71
Deactivating Auto Rotation ........................................................71
8
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Adding Images to a Photobook .................................................97
Choosing a Selection Method ...............................................97
Adding Images Individually ....................................................98
Adding All Images to a Photobook ........................................98
Removing All Images from a Photobook ...............................98
Using an Eye-Fi Card ............................................................. 99
Checking Connection Information .............................................99
Disabling Eye-Fi Transfer ........................................................100
8 Appendix .................................................................. 101
Troubleshooting .................................................................... 101
On-Screen Messages........................................................... 104
On-Screen Information ......................................................... 105
Shooting (Information Display) ................................................105
Battery Level .......................................................................106
Playback (Detailed Information Display) ..................................106
Summary of Movie Control Panel ........................................107
Functions and Menu Tables ................................................. 107
Functions Available in Each Shooting Mode ...........................107
FUNC. Menu ............................................................................108
Shooting Tab ............................................................................ 110
Set Up Tab ............................................................................... 112
Playback Tab ........................................................................... 113
Print Tab .................................................................................. 113
Playback Mode FUNC. Menu .................................................. 113
Handling Precautions ............................................................114
Specications ........................................................................114
Camera Specications ............................................................. 114
Digital Zoom Focal Length (35mm lm equivalent) ............. 115
Number of Shots/Recording Time, Playback Time .............. 115
Number of Shots per Memory Card .................................... 115
Recording Time per Memory Card ...................................... 116
7 Accessories ............................................................... 84
System Map ........................................................................... 84
Optional Accessories .............................................................. 85
Power Supplies ..........................................................................85
Flash Unit ..................................................................................86
Other Accessories .....................................................................86
Printer ........................................................................................86
Using Optional Accessories.................................................... 87
Playback on a TV ......................................................................87
Powering the Camera with Household Power ........................... 87
Using the Software ................................................................. 89
Software ....................................................................................89
Software Instruction Manual .................................................. 89
Checking Your Computer Environment .....................................89
Installing the Software ...............................................................90
Saving Images to a Computer ................................................... 90
Printing Images ...................................................................... 92
Easy Print ..................................................................................92
Conguring Print Settings .......................................................... 93
Cropping Images before Printing ...........................................93
Choosing Paper Size and Layout before Printing .................94
Available Layout Options ....................................................... 94
Printing ID Photos .................................................................94
Printing Movie Scenes ............................................................... 95
Movie Printing Options ..........................................................95
Adding Images to the Print List (DPOF) ....................................95
Conguring Print Settings ......................................................95
Setting Up Printing for Individual Images ..............................96
Setting Up Printing for a Range of Images ............................ 97
Setting Up Printing for All Images ..........................................97
Clearing All Images from the Print List ..................................97
Printing Images Added to the Print List (DPOF) .................... 97
9
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Flash Range ........................................................................ 116
Shooting Range ................................................................... 116
Continuous Shooting Speed ................................................ 116
Shutter Speed ..................................................................... 116
Aperture ............................................................................... 116
Battery Pack NB-11LH ......................................................... 117
Battery Charger CB-2LF/CB-2LFE ...................................... 117
Index......................................................................................118
Trademarks and Licensing ..................................................120
Disclaimer ............................................................................120
10
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Common Camera Operations
Shoot
Use camera-determined settings (Auto Mode)
-
=
28
Shooting people well
Portraits
(
=
43)
Against Snow
(
=
43)
Matching specic scenes
Low Light
(
=
43)
Fireworks
(
=
43)
Applying special effects
Vivid Colors
(
=
44)
Poster Effect
(
=
44)
Fish-Eye Effect
(
=
44)
Miniature Effect
(
=
45)
Toy Camera Effect
(
=
46)
Monochrome
(
=
46)
While adjusting image settings (Live View Control)
-
=
42
Focus on faces
-
=
28,
=
43,
=
56
Without using the ash (Flash Off)
-
=
28
Include yourself in the shot (Self-Timer)
-
=
33,
=
47
Add a date stamp
-
=
35
View
View images (Playback Mode)
-
=
61
Automatic playback (Slideshow)
-
=
65
On a TV
-
=
87
On a computer
-
=
89
Browse through images quickly
-
=
63
Erase images
-
=
69
Shoot/View Movies
Shoot movies
-
=
28
View movies (Playback Mode)
-
=
61
11
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Safety Precautions
Before using the product, ensure that you read the safety precautions
described below. Always ensure that the product is used correctly.
The safety precautions noted here are intended to prevent you and
other persons from being injured or incurring property damage.
Be sure to also check the guides included with any separately sold
accessories you use.
Warning
Denotes the possibility of serious injury or death.
Do not trigger the ash in close proximity to people’s eyes.
Exposure to the intense light produced by the ash could damage
eyesight. In particular, remain at least 1 meter (3.3 feet) away from infants
when using the ash.
Store this equipment out of the reach of children and infants.
A strap wound around a child’s neck may result in asphyxiation.
If your product uses a power cord, mistakenly winding the cord around a
child’s neck may result in asphyxiation.
Use only recommended power sources.
Do not disassemble, alter, or apply heat to the product.
Do not peel off the label, if the battery pack has one.
Avoid dropping or subjecting the product to severe impacts.
Do not touch the interior of the product if it is broken, such as when
dropped.
Stop using the product immediately if it emits smoke or a strange
smell, or otherwise behaves abnormally.
Do not use organic solvents such as alcohol, benzine, or thinner to
clean the product.
Print
Print pictures
-
=
92
Save
Save images to a computer
-
=
90
12
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the
operation of electronic instruments and other devices. Exercise adequate
caution when using the product in places where use of electronic devices
is restricted, such as inside airplanes and medical facilities.
Do not allow the camera to maintain contact with skin for extended
periods.
Even if the camera does not feel hot, this may cause low-temperature
burns, manifested in redness of the skin or blistering. Use a tripod in hot
places, or if you have poor circulation or insensitive skin.
Caution
Denotes the possibility of injury.
When carrying the product by the strap, be careful not to bang it,
subject it to strong impacts or shocks, or let it get caught on other
objects.
Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
When using the ash, be careful not to cover it with your ngers or
clothing.
This could result in burns or damage to the ash.
Avoid using, placing, or storing the product in the following places:
- Places subject to direct sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty places
These could cause leakage, overheating, or an explosion of the battery
pack/batteries, resulting in electrical shock, re, burns, or other injuries.
Overheating and damage may result in electrical shock, re, burns, or
other injuries.
Avoid contact with liquid, and do not allow liquid or foreign objects
inside.
This could result in electrical shock or re.
If the product gets wet, or if liquid or foreign objects get inside, remove the
battery pack/batteries or unplug immediately.
Do not look through the viewnder (if your model has one) at intense
light sources, such as the sun on a clear day or an intense articial
light source.
This could damage your eyesight.
Do not touch the product during thunderstorms if it is plugged in.
This could result in electrical shock or re. Immediately stop using the
product and distance yourself from it.
Use only the recommended battery pack/batteries.
Do not place the battery pack/batteries near or in direct ame.
This may cause the battery pack/batteries to explode or leak, resulting in
electrical shock, re, or injuries. If leaking battery electrolyte comes into
contact with eyes, mouth, skin, or clothing, immediately ush with water.
If the product uses a battery charger, note the following precautions.
- Remove the plug periodically and, using a dry cloth, wipe away any
dust and dirt that has collected on the plug, the exterior of the power
outlet, and the surrounding area.
- Do not insert or remove the plug with wet hands.
- Do not use the equipment in a manner that exceeds the rated
capacity of the electrical outlet or wiring accessories. Do not use if
the plug is damaged or not fully inserted in the outlet.
- Do not allow dust or metal objects (such as pins or keys) to contact
the terminals or plug.
- Do not cut, damage, alter, or place heavy items on the power cord, if
your product uses one.
This could result in electrical shock or re.
13
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Unplug any battery charger used with the product when not in use. Do
not cover with a cloth or other objects when in use.
Leaving the unit plugged in for a long period of time may cause it to
overheat and distort, resulting in re.
Do not leave any dedicated battery packs near pets.
Pets biting the battery pack could cause leakage, overheating, or
explosion, resulting in product damage or re.
If your product uses multiple batteries, do not use batteries that
have different levels of charge together, and do not use old and
new batteries together. Do not insert the batteries with the + and –
terminals reversed.
This may cause the product to malfunction.
Do not sit down with the camera in your pant pocket.
Doing so may cause malfunctions or damage the screen.
When putting the camera in your bag, ensure that hard objects do not
come into contact with the screen. Also close the screen (so that it
faces the body), if your product’s screen closes.
Do not attach any hard objects to the product.
Doing so may cause malfunctions or damage the screen.
The slideshow transition effects may cause discomfort when viewed
for prolonged periods.
When using optional lenses, lens lters, or lter adapters (if
applicable), be sure to attach these accessories rmly.
If the lens accessory becomes loose and falls off, it may crack, and the
shards of glass may lead to cuts.
On products that raise and lower the ash automatically, make sure to
avoid pinching your ngers with the lowering ash.
This could result in injury.
Caution
Denotes the possibility of property damage.
Do not aim the camera at intense light sources, such as the sun on a
clear day or an intense articial light source.
Doing so may damage the image sensor or other internal components.
When using the camera on a sandy beach or at a windy location, be
careful not to allow dust or sand to enter the camera.
On products that raise and lower the ash automatically, do not push
the ash down or pry it open.
This may cause the product to malfunction.
Wipe off any dust, grime, or other foreign matter on the ash with a
cotton swab or cloth.
The heat emitted from the ash may cause foreign matter to smoke or the
product to malfunction.
Remove and store the battery pack/batteries when you are not using
the product.
Any battery leakage that occurs may cause product damage.
Before you discard the battery pack/batteries, cover the terminals with
tape or other insulators.
Contacting other metal materials may lead to re or explosions.
14
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Initial Preparations
Prepare for shooting as follows.
Attaching Accessories
1
Attach the strap.
Thread the end of the strap through the
strap hole (1), and then pull the other
end of the strap through the loop on the
threaded end (2).
2
Attach the lens cap.
Remove the lens cap from the lens
momentarily, thread the end of the strap
through the strap hole (1), and then pull
the lens cap through the loop (2).
Always remove the lens cap before
turning the camera on.
Keep the lens cap on the lens when the
camera is not in use.
(
2
)
(
1
)
(
1
)
(
2
)
Basic Operations
Basic information and instructions, from initial preparations to shooting
and playback
Basic Guide
15
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
3
Remove the battery pack.
After unplugging the battery charger,
remove the battery pack by pushing it in
(1) and up (2).
To protect the battery pack and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
For battery chargers that use a power cord, do not attach
the charger or cord to other objects. Doing so could result in
malfunction or damage to the product.
For details on charging time and the number of shots and
recording time possible with a fully charged battery pack, see
“Number of Shots/Recording Time, Playback Time” (
=
115).
Charged battery packs gradually lose their charge, even when
they are not used. Charge the battery pack on (or immediately
before) the day of use.
The charger can be used in areas with 100 – 240 V AC power
(50/60 Hz). For power outlets in a different format, use a
commercially available adapter for the plug. Never use an
electrical transformer designed for traveling, which may damage
the battery pack.
(
1
)
(
2
)
Holding the Camera
Place the strap around your wrist.
When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. If you have
raised the ash, do not rest your ngers
on it.
Charging the Battery Pack
Before use, charge the battery pack with the included charger. Be sure to
charge the battery pack initially, because the camera is not sold with the
battery pack charged.
1
Insert the battery pack.
After aligning the marks on the battery
pack and charger, insert the battery pack
by pushing it in (1) and down (2).
2
Charge the battery pack.
CB-2LF: Flip out the plug (1) and plug the
charger into a power outlet (2).
CB-2LFE: Plug the power cord into the
charger, then plug the other end into a
power outlet.
The charging lamp turns orange, and
charging begins.
When charging is nished, the lamp turns
green.
(
1
)
(
2
)
(
2
)
(
1
)
CB-2LF
CB-2LFE
16
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
4
Close the cover.
Lower the cover (1) and hold it down as
you slide it, until it clicks into the closed
position (2).
For guidelines on how many shots or hours of recording can be
saved on one memory card, see “Number of Shots per Memory
Card” (
=
115).
Removing the Battery Pack and Memory Card
Remove the battery pack.
Open the cover and press the battery
lock in the direction of the arrow.
The battery pack will pop up.
Remove the memory card.
Push the memory card in until it clicks,
and then slowly release it.
The memory card will pop up.
(
1
)
(
2
)
Inserting the Battery Pack and Memory Card
Insert the included battery pack and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted
in another device), you should format the memory card with this camera
(
=
80).
1
Open the cover.
Slide the cover (1) and open it (2).
2
Insert the battery pack.
Holding the battery pack with the
terminals (1) facing as shown, press the
battery lock (2) in the direction of the
arrow and insert the battery pack until the
lock clicks shut.
If you insert the battery pack facing the
wrong way, it cannot be locked into the
correct position. Always conrm that the
battery pack is facing the right way and
locks when inserted.
3
Check the card’s write-protect tab
and insert the memory card.
Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked position. Slide the tab
to the unlocked position.
Insert the memory card with the label (1)
facing as shown until it clicks into place.
Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
(
1
)
(
2
)
(
1
)
(
2
)
(1)
17
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Unless you set the date, time, and home time zone, the [Date/
Time] screen will be displayed each time you turn the camera on.
Specify the correct information.
To set daylight saving time (1 hour ahead), choose [ ] in step 2
and then choose [
] by pressing the [ ][ ] buttons.
Changing the Date and Time
Adjust the date and time as follows.
1
Access the menu screen.
Press the [ ] button.
2
Choose [Date/Time].
Move the zoom lever to choose the [ ]
tab.
Press the [
][ ] buttons to choose
[Date/Time], and then press the [ ]
button.
3
Change the date and time.
Follow step 2 in “Setting the Date and
Time” (
=
17) to adjust the settings.
Press the [
] button to close the
menu screen.
Setting the Date and Time
Set the current date and time correctly as follows if the [Date/Time] screen
is displayed when you turn the camera on. Information you specify this
way is recorded in image properties when you shoot, and it is used when
you manage images by shooting date or print images showing the date.
You can also add a date stamp to shots, if you wish (
=
35).
1
Turn the camera on.
Press the power button.
The [Date/Time] screen is displayed.
2
Set the date and time.
Press the [ ][ ] buttons to choose an
option.
Press the [
][ ] buttons to specify the
date and time.
When nished, press the [
] button.
3
Specify your home time zone.
Press the [ ][ ] buttons to choose your
home time zone.
4
Finish the setup process.
Press the [ ] button when nished.
After a conrmation message, the setting
screen is no longer displayed.
To turn off the camera, press the power
button.
18
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Display Language
Change the display language as needed.
1
Enter Playback mode.
Press the [ ] button.
2
Access the setting screen.
Press and hold the [ ] button, and then
immediately press the [ ] button.
3
Set the display language.
Press the [ ][ ][ ][ ] buttons to choose
a language, and then press the [ ]
button.
Once the display language has been set,
the setting screen is no longer displayed.
The current time is displayed if you wait too long in step 2 after
pressing the [
] button before you press the [ ] button.
In this case, press the [
] button to dismiss the time display and
repeat step 2.
You can also change the display language by pressing the
[
] button and choosing [Language ] on the [ ] tab.
Date/time settings can be retained for about 3 weeks by the
camera’s built-in date/time battery (backup battery) after the
battery pack is removed.
The date/time battery will be charged in about 4 hours once you
insert a charged battery pack or connect the camera to an AC
adapter kit (sold separately,
=
85), even if the camera is left
off.
Once the date/time battery is depleted, the [Date/Time] screen will
be displayed when you turn the camera on. Set the correct date
and time as described in “Setting the Date and Time” (
=
17).
19
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
4
Shoot.
Shooting Still Images
1) Focus.
Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
If [Raise the ash] is displayed, lift the
ash with your nger to prepare it for use.
If you prefer not to use the ash, push it
down with your nger, into the camera.
2) Shoot.
Press the shutter button all the way
down.
As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the ash, it res
automatically.
Keep the camera still until the shutter
sound ends.
After displaying your shot, the camera will
revert to the shooting screen.
Trying the Camera Out
Still Images
Movies
Follow these instructions to turn the camera on, shoot still images or
movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specic scenes,
simply let the camera determine the subject and shooting conditions.
1
Turn the camera on.
Press the power button.
The startup screen is displayed.
2
Enter [ ] mode.
Press the [ ] button several times
until [ ] is displayed.
Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
Icons representing the scene and image
stabilization mode are displayed in the
upper right of the screen.
Frames displayed around any detected
subjects indicate that they are in focus.
3
Compose the shot.
To zoom in and enlarge the subject, move
the zoom lever toward [ ] (telephoto),
and to zoom away from the subject, move
it toward [ ] (wide angle).
20
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
2
Browse through your images.
To view the previous image, press the [ ]
button. To view the next image, press the
[ ] button.
To access this screen (Scroll Display
mode), press and hold the [
][ ] buttons
for at least one second. In this mode,
press the [ ][ ] buttons to browse
through images.
To return to single-image display, press
the [
] button.
Movies are identied by a [
] icon.
To play movies, go to step 3.
3
Play movies.
Press the [ ] button, press the [ ][ ]
buttons to choose [ ], and then press the
[ ] button again.
Playback now begins, and after the movie
is nished, [
] is displayed.
To adjust the volume, press the [
][ ]
buttons.
Shooting Movies
1) Start shooting.
Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
time (1).
Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
Frames displayed around any detected
faces indicate that they are in focus.
Once recording begins, take your nger
off the movie button.
2) Finish shooting.
Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
Viewing
After shooting images or movies, you can view them on the screen as
follows.
1
Enter Playback mode.
Press the [ ] button.
Your last shot is displayed.
(
1
)
21
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
To switch to Shooting mode from Playback mode, press the
shutter button halfway.
Erasing Images
You can choose and erase unneeded images one by one. Be careful
when erasing images, because they cannot be recovered.
1
Choose an image to erase.
Press the [ ][ ] buttons to choose an
image.
2
Erase the image.
Press the [ ] button.
After [Erase?] is displayed, press the
[
][ ] buttons to choose [Erase], and
then press the [ ] button.
The current image is now erased.
To cancel erasure, press the [
][ ]
buttons to choose [Cancel], and then
press the [ ] button.
You can choose multiple images to erase at once (
=
69).
22
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
On/Off
Shooting Mode
Press the power button to turn the
camera on and prepare for shooting.
To turn the camera off, press the power
button again.
Playback Mode
Press the [ ] button to turn the camera
on and view your shots.
To turn the camera off, press the [
]
button again.
To switch to Playback mode from Shooting mode, press the [ ]
button.
To switch to Shooting mode from Playback mode, press the
shutter button halfway (
=
23).
The lens will be retracted after about one minute once the camera
is in Playback mode. You can turn the camera off when the lens is
retracted by pressing the [
] button.
Advanced Guide
Camera Basics
Other basic operations and more ways to enjoy your camera, including
shooting and playback options
1
23
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Shutter Button
To ensure your shots are in focus, always begin by holding the shutter
button halfway down, and once the subject is in focus, press the button all
the way down to shoot.
In this manual, shutter button operations are described as pressing the
button halfway or all the way down.
1
Press halfway. (Press lightly to
focus.)
Press the shutter button halfway. The
camera beeps twice, and AF frames are
displayed around image areas in focus.
2
Press all the way down. (From the
halfway position, press fully to
shoot.)
The camera shoots, as a shutter sound
is played.
Keep the camera still until the shutter
sound ends.
Images may be out of focus if you shoot without initially pressing
the shutter button halfway.
Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes,
and images will be blurry if you move the camera (or the subject
moves) before the shutter sound ends.
Power-Saving Features (Auto Power Down)
As a way to conserve battery power, the camera automatically deactivates
the screen (Display Off) and then turns itself off after a specic period of
inactivity.
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute of
inactivity. In about two more minutes, the lens is retracted and the camera
turns itself off. To activate the screen and prepare for shooting when
the screen is off but the lens is still out, press the shutter button halfway
(
=
23).
Power Saving in Playback Mode
The camera turns itself off automatically after about ve minutes of
inactivity.
You can deactivate Auto Power Down and adjust the timing of
Display Off, if you prefer (
=
79).
Power saving is not active while the camera is connected to a
computer (
=
90).
24
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Using the FUNC. Menu
Congure commonly used functions through the FUNC. menu as follows.
Note that menu items and options vary depending on the shooting mode
(
=
108) or playback mode (
=
113).
1
Access the FUNC. menu.
Press the [ ] button.
2
Choose a menu item.
Press the [ ][ ] buttons to choose a
menu item (1), and then press the [ ] or
[ ] button.
Available options (2) are listed next to
menu items, on the right.
Depending on the menu item, functions
can be specied simply by pressing the
[
] or [ ] button, or another screen is
displayed for conguring the function.
3
Choose an option.
Press the [ ][ ] buttons to choose an
option.
Options labeled with a [
] icon can
be congured by pressing the [ ]
button.
To return to the menu items, press the
[
] button.
(
1
)
(
2
)
Shooting Display Options
Press the [ ] button to view other information on the screen, or to
hide the information. For details on the information displayed, see “On-
Screen Information” (
=
105).
Information is displayed
No information is displayed
Screen brightness is automatically increased by the night view
function when you are shooting under low light, making it easier
to check how shots are composed. However, on-screen image
brightness may not match the brightness of your shots. Note that
any on-screen image distortion or jerky subject motion will not
affect recorded images.
For playback display options, see “Switching Display Modes”
(
=
62).
25
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Using the Menu Screen
Congure a variety of camera functions through the menu screen as
follows. Menu items are grouped by purpose on tabs, such as shooting
[ ], playback [ ], and so on. Note that available menu items vary
depending on the selected shooting or playback mode (
=
110 –
=
113).
1
Access the menu screen.
Press the [ ] button.
2
Choose a tab.
Move the zoom lever to choose a tab.
After you have pressed the [
][ ]
buttons to choose a tab initially, you can
switch between tabs by pressing the
[ ][ ] buttons.
3
Choose a menu item.
Press the [ ][ ] buttons to choose a
menu item.
For menu items with options not shown,
rst press the [
] or [ ] button to switch
screens, and then press the [ ][ ]
buttons to select the menu item.
To return to the previous screen, press
the [
] button.
4
Finish the setup process.
Press the [ ] button.
The screen before you pressed the
[
] button in step 1 is displayed again,
showing the option you congured.
To undo any accidental setting changes, you can restore the
camera’s default settings (
=
83).
26
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Indicator Display
The indicator on the back of the camera (
=
3) lights up or blinks
depending on the camera status.
Color
Indicator
Status
Camera Status
Green
On
Connected to a computer (
=
90), or display
off (
=
23,
=
79)
Blinking
Starting up, recording/reading/transmitting
images, or shooting long exposures (
=
47)
When the indicator blinks green, never turn the camera off, open
the memory card/battery cover, or shake or jolt the camera, which
may corrupt images or damage the camera or memory card.
4
Choose an option.
Press the [ ][ ] buttons to choose an
option.
5
Finish the setup process.
Press the [ ] button to return to the
screen displayed before you pressed the
[ ] button in step 1.
To undo any accidental setting changes, you can restore the
camera’s default settings (
=
83).
27
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Clock
You can check the current time.
Press and hold the [
] button.
The current time appears.
If you hold the camera vertically while
using the clock function, it will switch to
vertical display. Press the [
][ ] buttons
to change the display color.
Press the [
] button again to cancel the
clock display.
When the camera is off, press and hold the [ ] button, then
press the power button to display the clock.
28
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Shooting with Camera-Determined
Settings
For fully automatic selection of the optimal settings for specic scenes,
simply let the camera determine the subject and shooting conditions.
Shooting (Smart Auto)
Still Images
Movies
1
Turn the camera on.
Press the power button.
The startup screen is displayed.
2
Enter [ ] mode.
Press the [ ] button several times
until [ ] is displayed.
Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
Icons representing the scene and image
stabilization mode are displayed in the
upper right of the screen (
=
31,
=
32).
Frames displayed around any detected
subjects indicate that they are in focus.
2
Auto Mode
Convenient mode for easy shots with greater control over shooting
29
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
2) Shoot.
Press the shutter button all the way down.
As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the ash, it res
automatically.
Keep the camera still until the shutter
sound ends.
After displaying your shot, the camera will
revert to the shooting screen.
Shooting Movies
1) Start shooting.
Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
time (1).
Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
Frames displayed around any detected
faces indicate that they are in focus.
Once recording begins, take your nger
off the movie button.
2) Resize the subject and recompose
the shot as needed.
To resize the subject, repeat the
operations in step 3.
However, note that the sound of camera
operations will be recorded. Note that
movies shot at zoom factors shown in
blue will look grainy.
When you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
(
1
)
3
Compose the shot.
To zoom in and enlarge the subject, move
the zoom lever toward [ ] (telephoto),
and to zoom away from the subject, move
it toward [ ] (wide angle). (A zoom
bar (1) showing the zoom position is
displayed.)
To zoom in or out quickly, move the zoom
lever all the way toward [
] (telephoto)
or [ ] (wide angle), and to zoom in
or out slowly, move it just a little in the
desired direction.
4
Shoot.
Shooting Still Images
1) Focus.
Press the shutter button halfway. The
camera beeps twice after focusing, and
AF frames are displayed to indicate
image areas in focus.
Several AF frames are displayed when
multiple areas are in focus.
If [Raise the ash] is displayed, lift the
ash with your nger to prepare it for use.
If you prefer not to use the ash, push it
down with your nger, into the camera.
(
1
)
30
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
You can change how long images are displayed after shots
(
=
40).
Movies
Before shooting a movie, lower the ash with your nger. Be
careful not to touch the microphone (1) when shooting a movie.
Leaving the ash raised, or blocking the microphone may prevent
audio from being recorded or may cause the recording to sound
mufed.
Avoid touching camera controls other than the movie button when
shooting movies, because sounds made by the camera will be
recorded.
Once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of signicant
camera shake. To shoot subjects at the same size shown before
shooting, adjust the image stabilization setting (
=
60).
(
1
)
Audio recording is monaural.
3) Finish shooting.
Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
Recording will stop automatically when
the memory card becomes full.
Still Images/Movies
If the camera is turned on while the [ ] button is held down,
the camera will no longer sound. To activate sounds again, press
the [
] button and choose [Mute] on the [ ] tab, and then
press the [
][ ] buttons to choose [Off].
Still Images
A blinking [ ] icon warns that images are more likely to be
blurred by camera shake. In this case, mount the camera on a
tripod or take other measures to keep it still.
If your shots are dark despite the ash ring, move closer to
the subject. For details on the ash range, see “Flash Range”
(
=
116).
The subject may be too close if the camera only beeps once
when you press the shutter button halfway. For details on the
focusing range (shooting range), see “Shooting Range” (
=
116).
To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.
A blinking [
] icon displayed when you attempt to shoot
indicates that shooting is not possible until the ash has nished
recharging. Shooting can resume as soon as the ash is ready,
so either press the shutter button all the way down and wait, or
release it and press it again.
Although you can shoot again before the shooting screen
is displayed, your previous shot may determine the focus,
brightness, and colors used.
31
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Background
When Shooting Other Subjects
Icon
Background
Color
Other
Subjects
In Motion*
1
At Close
Range
Spotlights
Dark BlueDark
Dark, Using Tripod
*
2
*1 Not displayed for movies.
*2 Displayed in dark scenes when the camera is held still, as when mounted on a
tripod.
Try shooting in [ ] mode (
=
49) if the scene icon does not
match actual shooting conditions, or if it is not possible to shoot
with your expected effect, color, or brightness.
Scene Icons
Still Images
Movies
In [ ] mode, shooting scenes determined by the camera are indicated
by the icon displayed, and corresponding settings are automatically
selected for optimal focusing, subject brightness, and color.
Background
When Shooting People
Icon
Background
Color
People In Motion*
1
Shadows
on Face*
1
Bright
Gray
Bright and Backlit
With Blue Sky
Light Blue
Blue Sky and
Backlit
Spotlights
Dark BlueDark
Dark, Using Tripod
*
2
Background
When Shooting Other Subjects
Icon
Background
Color
Other
Subjects
In Motion*
1
At Close
Range
Bright
Gray
Bright and Backlit
With Blue Sky
Light Blue
Blue Sky and
Backlit
Sunsets
Orange
32
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
On-Screen Frames
Still Images
Movies
A variety of frames are displayed once the camera detects subjects you
are aiming the camera at.
A white frame is displayed around the subject (or person’s face)
determined by the camera to be the main subject, and gray frames are
displayed around other detected faces. Frames follow moving subjects
within a certain range to keep them in focus. However, if the camera
detects subject movement, only the white frame will remain on the
screen.
When you are pressing the shutter button halfway and the camera
detects subject movement, a blue frame is displayed, and the focus
and image brightness are constantly adjusted (Servo AF).
Try shooting in [ ] mode (
=
49) if no frames are displayed, if
frames are not displayed around desired subjects, or if frames are
displayed on the background or similar areas.
Image Stabilization Icons
Still Images
Movies
Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS). Additionally, the following icons are displayed in
[ ] mode.
Image stabilization for still images (Normal)
Image stabilization for still images when panning (Panning)*
Image stabilization for macro shots. During movie recording, [ ]
is displayed, and image stabilization for macro movie recording is
used (Hybrid IS).
Image stabilization for movies, reducing strong camera shake, as
when shooting while walking (Dynamic)
Image stabilization for slow camera shake, such as when shooting
movies at telephoto (Powered)
No image stabilization, because the camera is mounted on
a tripod or held still by other means. However, during movie
recording, [ ] is displayed, and image stabilization to counteract
wind or other sources of vibration is used (Tripod IS).
* Displayed when you pan, following moving subjects with the camera. When you
follow subjects moving horizontally, image stabilization only counteracts vertical
camera shake, and horizontal stabilization stops. Similarly, when you follow
subjects moving vertically, image stabilization only counteracts horizontal camera
shake.
To cancel image stabilization, set [IS Mode] to [Off] (
=
60). In
this case, an IS icon is not displayed.
33
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
To deactivate digital zoom, choose MENU (
=
25) ► [ ] tab
► [Digital Zoom] ► [Off].
Using the Self-Timer
Still Images
Movies
With the self-timer, you can include yourself in group photos or other
timed shots. The camera will shoot about 10 seconds after you press the
shutter button.
1
Congure the setting.
Press the [ ] button, press the [ ][ ]
buttons to choose [ ], and then press
the [ ] button.
Once the setting is complete, [
] is
displayed.
2
Shoot.
For Still Images: Press the shutter button
halfway to focus on the subject, and then
press it all the way down.
For Movies: Press the movie button.
Common, Convenient Features
Still Images
Movies
Zooming In Closer on Subjects (Digital Zoom)
When distant subjects are too far away to enlarge using the optical zoom,
use digital zoom for up to about 120x enlargement.
1
Move the zoom lever toward [ ].
Hold the lever until zooming stops.
Zooming stops at the largest possible
zoom factor (before the image becomes
noticeably grainy), which is then indicated
on the screen.
2
Move the zoom lever toward [ ]
again.
(1) is the current zoom factor.
The camera zooms in even closer on the
subject.
Moving the zoom lever will display the zoom bar (which indicates
the zoom position). The color of the zoom bar will change
depending on the zoom range.
- White range: optical zoom range where the image will not
appear grainy.
- Yellow range: digital zoom range where the image is not
noticeably grainy (ZoomPlus).
- Blue range: digital zoom range where the image will appear grainy.
Because the blue range will not be available at some resolution
settings (
=
37), the maximum zoom factor can be achieved by
following step 1.
(
1
)
34
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Customizing the Self-Timer
Still Images
Movies
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1
Choose [ ].
Following step 1 in “Using the Self-Timer”
(
=
33), choose [ ] and press the
[ ] button immediately.
2
Congure the setting.
Press the [ ][ ] buttons to choose
[Delay] or [Shots].
Press the [
][ ] buttons to choose a
value, and then press the [ ] button.
Once the setting is complete, [
] is
displayed.
Follow step 2 in “Using the Self-Timer”
(
=
33) to shoot.
For movies shot using the self-timer, [Delay] represents the delay
before recording begins, but the [Shots] setting has no effect.
When you specify multiple shots, image brightness and white
balance are determined by the rst shot. More time is required
between shots when the ash res or when you have specied
to take many shots. Shooting will stop automatically when the
memory card becomes full.
When a delay longer than two seconds is specied, two seconds
before the shot, the lamp blinking and self-timer sound will speed
up. (The lamp will remain lit in case the ash res.)
Once you start the self-timer, the lamp
will blink and the camera will play a self-
timer sound.
Two seconds before the shot, the blinking
and sound will speed up. (The lamp will
remain lit in case the ash res.)
To cancel shooting after you have
triggered the self-timer, press the
[
] button.
To restore the original setting, choose [
]
in step 1.
Using the Self-Timer to Avoid Camera Shake
Still Images
Movies
This option delays shutter release until about two seconds after you
have pressed the shutter button. If the camera is unsteady while you are
pressing the shutter button, it will not affect your shot.
Follow step 1 in “Using the Self-Timer”
(
=
33) and choose [ ].
Once the setting is complete, [
] is
displayed.
Follow step 2 in “Using the Self-Timer”
(
=
33) to shoot.
35
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Shots taken without adding a date stamp can be printed with one
as follows.
However, adding a date stamp this way to images that already
have one may cause it to be printed twice.
- Print using printer functions (
=
92)
- Use camera DPOF print settings (
=
95) to print
- Use the software downloaded from the Canon website
(
=
89) to print
Continuous Shooting
Still Images
Movies
Hold the shutter button all the way down to shoot continuously.
For details on the continuous shooting speed, see “Continuous Shooting
Speed” (
=
116).
1
Congure the setting.
Press the [ ] button, choose [ ] in the
menu, and then choose [ ] (
=
24).
Once the setting is complete, [
] is
displayed.
2
Shoot.
Hold the shutter button all the way down
to shoot continuously.
Adding a Date Stamp
Still Images
Movies
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so conrm
beforehand that the date and time are correct (
=
17).
1
Congure the setting.
Press the [ ] button, choose [Date
Stamp ] on the [ ] tab, and then
choose the desired option (
=
25).
Once the setting is complete, [
] is
displayed.
2
Shoot.
As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
To restore the original setting, choose
[Off] in step 1.
Date stamps cannot be edited or removed.
36
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Image Customization Features
Changing the Aspect Ratio
Still Images
Movies
Change the image aspect ratio (ratio of width to height) as follows.
Press the [
] button, choose [ ] in the
menu, and choose the desired option
(
=
24).
Once the setting is complete, the screen
aspect ratio will be updated.
To restore the original setting, repeat this
process but choose [
].
Same aspect ratio as widescreen HDTVs.
Same aspect ratio as 35mm lm, used for printing images at 5 x
7-inch or postcard sizes.
Native aspect ratio of the camera screen, also used for display
on standard-denition televisions or similar display devices, or for
printing images at 3.5 x 5-inch or A-series sizes.
Square aspect ratio.
During continuous shooting, focus and exposure are locked at the
position/level determined when you pressed the shutter button
halfway.
Cannot be used with the self-timer (
=
33).
Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
As more shots are taken, shooting may slow down.
Shooting may slow down if the ash res.
37
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Red-Eye Correction
Still Images
Movies
Red-eye that occurs in ash photography can be automatically corrected
as follows.
1
Access the [Flash Settings] screen.
Press the [ ] button, choose [Flash
Settings] on the [ ] tab, and then press
the [ ] button (
=
25).
2
Congure the setting.
Choose [Red-Eye Corr.], and then
choose [On] (
=
25).
Once the setting is complete, [
] is
displayed.
To restore the original setting, repeat this
process but choose [Off].
Red-eye correction may be applied to image areas other than
eyes (if the camera misinterprets red eye makeup as red pupils,
for example).
You can also correct existing images (
=
75).
You can also access the screen in step 2 when the ash is up by
pressing the [
] button and immediately pressing the [ ]
button.
Changing Image Resolution (Size)
Still Images
Movies
Choose from 4 levels of image resolution, as follows. For guidelines on
how many shots at each resolution setting can t on a memory card, see
“Number of Shots per Memory Card” (
=
115).
Press the [
] button, choose [ ] in the
menu, and choose the desired option
(
=
24).
The option you congured is now
displayed.
To restore the original setting, repeat this
process but choose [
].
Guidelines for Choosing Resolution Based on Paper
Size (for 4:3 Images)
A2 (16.5 x 23.4 in.)
A3 – A5 (11.7 x 16.5 – 5.8 x 8.3 in.)
3.5 x 5 in., 5 x 7 in., Postcard
For e-mailing and similar purposes
38
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Helpful Shooting Features
Displaying Grid Lines
Still Images
Movies
Grid lines can be displayed on the screen for vertical and horizontal
reference while shooting.
Press the [
] button, choose [Grid
Lines] on the [ ] tab, and then choose
[On] (
=
25).
Once the setting is complete, grid lines
are displayed on the screen.
To restore the original setting, repeat this
process but choose [Off].
Grid lines are not recorded in your shots.
Changing Movie Image Quality
Still Images
Movies
2 image quality settings are available. For guidelines on the maximum
movie length at each level of image quality that will t on a memory card,
see “Recording Time per Memory Card” (
=
116).
Press the [
] button, choose [ ] in the
menu, and choose the desired option
(
=
24).
The option you congured is now
displayed.
To restore the original setting, repeat this
process but choose [
].
Image
Quality
Resolution Frame Rate Details
1280 x 720 25 fps For shooting in HD
640 x 480 30 fps
For shooting in
standard denition
In [ ] mode, black bars displayed on the top and bottom edges
of the screen indicate image areas not recorded.
39
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Checking for Closed Eyes
Still Images
Movies
[ ] is displayed when the camera detects that people may have closed
their eyes.
1
Congure the setting.
Press the [ ] button, choose [Blink
Detection] on the [ ] tab, and then
choose [On] (
=
25).
2
Shoot.
[ ] ashes when the camera detects a
person whose eyes are closed.
To restore the original setting, choose
[Off] in step 1.
When you have specied multiple shots in [ ] mode, this
function is only available for the nal shot.
A frame is displayed around people whose eyes are closed when
you have selected [2 sec.], [4 sec.], [8 sec.], or [Hold] in [Display
Time] (
=
40).
This feature is not available in continuous shooting mode
(
=
35).
Magnifying the Area in Focus
Still Images
Movies
You can check the focus by pressing the shutter button halfway, which will
enlarge the portion of the image in focus in the AF frame.
1
Congure the setting.
Press the [ ] button, choose [AF-
Point Zoom] on the [ ] tab, and then
choose [On] (
=
25).
2
Check the focus.
Press the shutter button halfway. The
face detected as the main subject is now
magnied.
To restore the original setting, choose
[Off] in step 1.
The area in focus is not magnied in the following cases when the
shutter button is pressed halfway.
- If a face was not detected, if the person is too close to the
camera and their face is too large for the screen, or if the
camera detects subject movement
- When digital zoom is used (
=
33)
- When Tracking AF is used (
=
56)
- When a TV is used as a display (
=
87)
40
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Deactivating the Red-Eye Reduction Lamp
Still Images
Movies
You can deactivate the red-eye reduction lamp that lights up to reduce
red-eye when the ash is used in low-light shots.
1
Access the [Flash Settings] screen.
Press the [ ] button, choose [Flash
Settings] on the [ ] tab, and then press
the [ ] button (
=
25).
2
Congure the setting.
Choose [Red-Eye Lamp], and then
choose [Off] (
=
25).
To restore the original setting, repeat this
process but choose [On].
Changing the Image Display Style after Shots
Still Images
Movies
You can change how long images are displayed and what information is
displayed immediately after shooting.
Changing the Image Display Period after Shots
1
Access the [Review image after
shooting] screen.
Press the [ ] button, choose
[Review image after shooting] on the
[ ] tab, and then press the [ ] button
(
=
25).
Customizing Camera Operation
Customize shooting functions on the [ ] tab of the menu screen as
follows.
For instructions on menu functions, see “Using the Menu Screen”
(
=
25).
Deactivating the AF-Assist Beam
Still Images
Movies
You can deactivate the lamp that normally lights up to help you focus
when you press the shutter button halfway in low-light conditions.
Press the [
] button, choose [AF-
assist Beam] on the [ ] tab, and then
choose [Off] (
=
25).
To restore the original setting, repeat this
process but choose [On].
41
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
2
Congure the setting.
Press the [ ][ ] buttons to choose
[Display Time]. Press the [ ][ ] buttons
to choose the desired option.
To restore the original setting, repeat this
process but choose [Quick].
Quick Displays images only until you can shoot again.
2 sec., 4 sec.,
8 sec.
Displays images for the specied time. Even while
the shot is displayed, you can take another shot by
pressing the shutter button halfway again.
Hold
Displays images until you press the shutter button halfway.
Off No image display after shots.
Changing the Screen Displayed after Shots
Change the way images are displayed after shots as follows.
1
Set [Display Time] to [2 sec.],
[4 sec.], [8 sec.], or [Hold] (=
40).
2
Congure the setting.
Press the [ ][ ] buttons to choose
[Display Info]. Press the [ ][ ] buttons to
choose the desired option.
To restore the original setting, repeat this
process but choose [Off].
Off Displays only the image.
Detailed
Displays shooting details (
=
106).
When [Display Time] (
=
40) is set to [Off] or [Quick], [Display
Info] is set to [Off] and cannot be changed.
By pressing the [
] button while an image is displayed after
shooting, you can switch the display information. Note that the
settings of [Display Info] are not changed. You can also erase
images by pressing the [
] button, or protect (
=
67) or tag
images as favorites (
=
72) by pressing the [ ] button.
42
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Brightness / Color Customization
(Live View Control)
Still Images
Movies
Image brightness or colors when shooting can be easily customized as
follows.
1
Enter [ ] mode.
Press the [ ] button several times
until [ ] is displayed.
2
Congure the setting.
Press the [ ] button to access the
setting screen. Press the [ ][ ] buttons
to choose a setting item, and then press
the [ ][ ] buttons to adjust the value as
you watch the screen.
Press the [
] button.
3
Shoot.
Brightness
For brighter images, adjust the level to the right, and
for darker images, adjust it to the left.
Color
For more vivid images, adjust the level to the right, and
for more subdued images, adjust it to the left.
Tone
For a warm, reddish tone, adjust the level to the right,
and for a cool, bluish tone, adjust it to the left.
3
Other Shooting Modes
Shoot more effectively in various scenes, and take shots enhanced with
unique image effects or captured using special functions
43
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Shooting with Snowy Backgrounds
(Snow)
Still Images
Movies
Bright, natural-colored shots of people
against snowy backgrounds.
Shooting Fireworks (Fireworks)
Still Images
Movies
Vivid shots of reworks.
In [ ] mode, mount the camera on a tripod or take other
measures to keep it still and prevent camera shake. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other
means to secure the camera (
=
60).
[ ] mode resolution is [ ] (2304 x 1728) and cannot be changed.
In [
] mode, although no frames are displayed when you press
the shutter button halfway, optimal focus is still determined.
Specic Scenes
Choose a mode matching the shooting scene, and the camera will
automatically congure the settings for optimal shots.
1
Choose a shooting mode.
Press the [ ] button several times
until [ ] is displayed.
Press the [
] button, choose [ ] in
the menu, and choose the desired option
(
=
24).
2
Shoot.
Shooting Portraits (Portrait)
Still Images
Movies
Take shots of people with a softening
effect.
Shooting under Low Light (Low Light)
Still Images
Movies
Shoot with minimal camera and subject
shake even in low-light conditions.
44
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Shooting with a Fish-Eye Lens Effect (Fish-Eye Effect)
Still Images
Movies
Shoot with the distorting effect of a sh-eye lens.
1
Choose [ ].
Follow step 1 in “Specic Scenes”
(
=
43) and choose [ ].
2
Choose an effect level.
Press the [ ] button, press the [ ][ ]
buttons to choose an effect level, and
then press the [ ] button again.
A preview is shown of how your shot will
look with the effect applied.
3
Shoot.
Try taking some test shots rst, to make sure you obtain the
desired results.
Applying Special Effects
Add a variety of effects to images when shooting.
1
Choose a shooting mode.
Follow step 1 in “Specic Scenes”
(
=
43) to choose a shooting mode.
2
Shoot.
Shooting in Vivid Colors (Super Vivid)
Still Images
Movies
Shots in rich, vivid colors.
Posterized Shots (Poster Effect)
Still Images
Movies
Shots that resemble an old poster or
illustration.
In [ ] and [ ] modes, try taking some test shots rst, to make
sure you obtain the desired results.
45
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Playback Speed and Estimated Playback Time
(for One-Minute Clips)
Speed Playback Time
Approx. 12 sec.
Approx. 6 sec.
Approx. 3 sec.
The zoom is not available when shooting movies. Be sure to set
the zoom before shooting.
Try taking some test shots rst, to make sure you obtain the
desired results.
To switch the orientation of the frame (from horizontal to vertical
or vice-versa), press the [
] button in step 2. You can move the
frame in vertical orientation by pressing the [
][ ] buttons.
Holding the camera vertically will change the orientation of the
frame.
Movie image quality is [
] at an aspect ratio of [ ] and [ ] at
an aspect ratio of [
] (
=
36). These quality settings cannot
be changed.
Shots Resembling Miniature Models (Miniature Effect)
Still Images
Movies
Creates the effect of a miniature model, by blurring image areas above
and below your selected area.
You can also make movies that look like scenes in miniature models by
choosing the playback speed before the movie is recorded. People and
objects in the scene will move quickly during playback. Note that sound is
not recorded.
1
Choose [ ].
Follow step 1 in “Specic Scenes”
(
=
43) and choose [ ].
A white frame is displayed, indicating the
image area that will not be blurred.
2
Choose the area to keep in focus.
Press the [ ] button.
Move the zoom lever to resize the frame,
and press the [
][ ] buttons to move it.
3
For movies, choose the movie
playback speed.
Press the [ ] button, and then
press the [ ][ ] buttons to choose the
speed.
4
Return to the shooting screen and
shoot.
Press the [ ] button to return to the
shooting screen, and then shoot.
46
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Shooting in Monochrome
Still Images
Movies
Shoot images in black and white, sepia, or blue and white.
1
Choose [ ].
Follow step 1 in “Specic Scenes”
(
=
43) and choose [ ].
2
Choose a color tone.
Press the [ ] button, press the [ ][ ]
buttons to choose a color tone, and then
press the [ ] button again.
A preview is shown of how your shot will
look with the effect applied.
3
Shoot.
B/W Black and white shots.
Sepia Sepia tone shots.
Blue Blue and white shots.
Shooting with a Toy Camera Effect (Toy Camera Effect)
Still Images
Movies
This effect makes images resemble shots from a toy camera by vignetting
(darker, blurred image corners) and changing the overall color.
1
Choose [ ].
Follow step 1 in “Specic Scenes”
(
=
43) and choose [ ].
2
Choose a color tone.
Press the [ ] button, press the [ ][ ]
buttons to choose a color tone, and then
press the [ ] button again.
A preview is shown of how your shot will
look with the effect applied.
3
Shoot.
Standard Shots resemble toy camera images.
Warm Images have a warmer tone than with [Standard].
Cool Images have a cooler tone than with [Standard].
Try taking some test shots rst, to make sure you obtain the
desired results.
47
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
4
Join the subjects in the shooting
area and look at the camera.
After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the ash res, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
To cancel shooting after you have
triggered the self-timer, press the
[
] button.
Even if your face is not detected after you join the others in the
shooting area, the camera will shoot about 15 seconds later.
To change the number of shots, after choosing [
] in step 1,
press the [
] button, press the [ ][ ] buttons to choose the
number of shots, and then press the [
] button again. [Blink
Detection] (
=
39) is only available for the nal shot.
Shooting Long Exposures (Long Shutter)
Still Images
Movies
Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this
case, mount the camera on a tripod or take other measures to prevent
camera shake.
1
Choose [ ].
Follow step 1 in “Specic Scenes”
(
=
43) and choose [ ].
Special Modes for Other Purposes
Using the Face Self-Timer
Still Images
Movies
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
(
=
56). This is useful when including yourself in group photos or similar
shots.
1
Choose [ ].
Follow step 1 in “Specic Scenes”
(
=
43) and choose [ ].
2
Compose the shot and press the
shutter button halfway.
Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
3
Press the shutter button all the way
down.
The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
The lamp blinks and the self-timer sound
is played.
48
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
2
Choose the shutter speed.
Press the [ ] button, press the [ ][ ]
buttons to choose the shutter speed, and
then press the [ ] button.
3
Check the exposure.
Press the shutter button halfway to view
the exposure for your selected shutter
speed.
4
Shoot.
On-screen image brightness in step 3, when you pressed the
shutter button halfway, may not match the brightness of your
shots.
With shutter speeds of 1.3 seconds or slower, there will be a
delay before you can shoot again, as the camera processes
images to reduce noise.
Set [IS Mode] to [Off] when using a tripod or other means to
secure the camera (
=
60).
If the ash res, your shot may be overexposed. In this case, set
the ash to [
] and shoot again (
=
58).
49
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Shooting in Program AE ([P] Mode)
Still Images
Movies
You can customize many function settings to suit your preferred shooting
style.
1
Enter [ ] mode.
Follow step 1 in “Specic Scenes”
(
=
43) and choose [ ].
2
Customize the settings as desired
(=
50 – =
60), and then shoot.
If adequate exposure cannot be obtained when you press the
shutter button halfway, shutter speeds and aperture values are
displayed in orange. In this case, try adjusting the ISO speed
(
=
51) or activating the ash (if subjects are dark,
=
58),
which may enable adequate exposure.
Movies can be recorded in [
] mode as well, by pressing the
movie button. However, some FUNC. (
=
24) and MENU
(
=
25) settings may be automatically adjusted for movie
recording.
4
P Mode
More discerning shots, in your preferred shooting style
Instructions in this chapter apply to the camera when set to [
] mode.
[
]: Program AE; AE: Auto Exposure
Before using a function introduced in this chapter in modes other than
[
], make sure the function is available in that mode (
=
107).
50
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Locking Image Brightness / Exposure (AE Lock)
Still Images
Movies
Before shooting, you can lock the exposure, or you can specify focus and
exposure separately.
1
Lock the exposure.
Aim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
[ ] button.
[
] is displayed, and the exposure is
locked.
To unlock AE, release the shutter button
and press the [
] button again. In this
case, [ ] is no longer displayed.
2
Compose the shot and shoot.
AE: Auto Exposure
Image Brightness (Exposure)
Adjusting Image Brightness (Exposure Compensation)
Still Images
Movies
The standard exposure set by the camera can be adjusted in 1/3-stop
increments, in a range of –2 to +2.
Press the [
] button. As you watch the
screen, press the [ ][ ] buttons to adjust
brightness.
When shooting movies, shoot with the
exposure compensation bar displayed.
When shooting still images, press the
[
] button to display the set exposure
compensation amount, and then shoot.
You can also shoot still images with exposure compensation bar
displayed.
While recording a movie, [
] is displayed, and the exposure is
locked.
51
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Changing the ISO Speed
Still Images
Movies
Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(
=
24).
The option you congured is now
displayed.
AUTO
Automatically adjusts the ISO speed to suit the
shooting mode and conditions.
100, 200 Low
For shooting outdoors in fair
weather.
400, 800 Slightly Low
For shooting in cloudy
conditions, or at twilight.
1600 Slightly High
For shooting night scenes, or
in dark rooms.
To view the automatically determined ISO speed when you have
set the ISO speed to [AUTO], press the shutter button halfway.
Although choosing a lower ISO speed may reduce image
graininess, there may be a greater risk of subject and camera
shake in some shooting conditions.
Choosing a higher ISO speed will increase shutter speed, which
may reduce subject and camera shake and increase the ash
range. However, shots may look grainy.
Changing the Metering Method
Still Images
Movies
Adjust the metering method (how brightness is measured) to suit shooting
conditions as follows.
Press the [
] button, choose [ ] in the
menu, and choose the desired option
(
=
24).
The option you congured is now
displayed.
Evaluative
For typical shooting conditions, including backlit
shots. Automatically adjusts exposure to match the
shooting conditions.
Center
Weighted
Avg.
Determines the average brightness of light across
the entire image area, calculated by treating
brightness in the central area as more important.
Spot
Metering restricted to within the [
] (Spot AE Point
frame), displayed in the center of the screen.
52
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Image Colors
Adjusting White Balance
Still Images
Movies
By adjusting white balance (WB), you can make image colors look more
natural for the scene you are shooting.
Press the [
] button, choose [ ] in the
menu, and choose the desired option
(
=
24).
The option you congured is now
displayed.
Auto
Automatically sets the optimal white balance for
the shooting conditions.
Day Light For shooting outdoors in fair weather.
Cloudy For shooting in cloudy weather or at twilight.
Tungsten
For shooting under ordinary incandescent
lighting.
Fluorescent For shooting under white uorescent lighting.
Fluorescent H For shooting under daylight uorescent lighting.
Custom
For manually setting a custom white balance
(
=
53).
Correcting Image Brightness (i-Contrast)
Still Images
Movies
Before shooting, excessively bright or dark image areas (such as faces or
backgrounds) can be detected and automatically adjusted to the optimal
brightness. Insufcient overall image contrast can also be automatically
corrected before shooting to make subjects stand out better.
Press the [
] button, choose
[i-Contrast] on the [ ] tab, and then
choose [Auto] (
=
25).
Once the setting is complete, [
] is
displayed.
Under some shooting conditions, correction may be inaccurate or
may cause images to appear grainy.
You can also correct existing images (
=
75).
53
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
My Colors Off
Vivid
Emphasizes contrast and color saturation,
making images sharper.
Neutral
Tones down contrast and color saturation for
subdued images.
Sepia Creates sepia tone images.
B/W Creates black and white images.
Positive Film
Combines the effects of Vivid Blue, Vivid
Green, and Vivid Red to produce intense yet
natural-looking colors resembling images on
positive lm.
Lighter Skin Tone Lightens skin tones.
Darker Skin Tone Darkens skin tones.
Vivid Blue
Emphasizes blues in images. Makes the sky,
ocean, and other blue subjects more vivid.
Vivid Green
Emphasizes greens in images. Makes
mountains, foliage, and other green subjects
more vivid.
Vivid Red
Emphasizes reds in images. Makes red
subjects more vivid.
Custom Color
Adjust contrast, sharpness, color saturation,
and other qualities as desired (
=
54).
White balance (
=
52) cannot be set in [ ] or [ ] modes.
With [
] and [ ] modes, colors other than people’s skin tone
may change. These settings may not produce the expected
results with some skin tones.
Custom White Balance
Still Images
Movies
For image colors that look natural under the light in your shot, adjust white
balance to suit the light source where you are shooting. Set the white
balance under the same light source that will illuminate your shot.
Follow the steps in “Adjusting White
Balance” (
=
52) to choose [ ].
Aim the camera at a plain white subject,
so that the entire screen is white. Press
the [
] button.
The tint of the screen changes once the
white balance data has been recorded.
Colors may look unnatural if you change camera settings after
recording white balance data.
Changing Image Color Tones (My Colors)
Still Images
Movies
Change image color tones as desired, such as converting images to sepia
or black and white.
Press the [
] button, choose [ ] in the
menu, and choose the desired option
(
=
24).
The option you congured is now
displayed.
54
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Shooting Range and Focusing
Shooting Close-Ups (Macro)
Still Images
Movies
To restrict the focus to subjects at close range, set the camera to [ ]. For
details on the focusing range, see “Shooting Range” (
=
116).
Press the [
] button, press the [ ][ ]
buttons to choose [ ], and then press the
[ ] button.
Once the setting is complete, [
] is
displayed.
If the ash res, vignetting may occur.
Be careful to avoid damaging the lens.
In the yellow bar display area below the zoom bar, [
] will turn
gray and the camera will not focus.
To prevent camera shake, try mounting the camera on a tripod
and shooting with the camera set to [
] (
=
34).
Custom Color
Still Images
Movies
Choose the desired level of image contrast, sharpness, color saturation,
red, green, blue, and skin tones in a range of 1 – 5.
1
Access the setting screen.
Follow the steps in “Changing Image
Color Tones (My Colors)” (
=
53) to
choose [ ], and then press the [ ]
button.
2
Congure the setting.
Press the [ ][ ] buttons to choose an
option, and then specify the value by
pressing the [ ][ ] buttons.
For stronger/more intense effects (or
darker skin tones), adjust the value to
the right, and for weaker/lighter effects
(or lighter skin tones), adjust the value to
the left.
Press the [
] button to complete the
setting.
55
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Changing the AF Frame Mode
Still Images
Movies
Change the AF (auto focus) frame mode to suit the shooting conditions as
follows.
Press the [
] button, choose [AF
Frame] on the [ ] tab, and then choose
the desired option (
=
25).
Center
Still Images
Movies
One AF frame is displayed in the center. Effective for reliable focusing.
A yellow AF frame is displayed with [ ] if the camera cannot
focus when you press the shutter button halfway.
To reduce the AF frame size, press the [ ] button and set
[AF Frame Size] on the [
] tab to [Small] (
=
25).
The AF frame size is set to [Normal] when you use the digital
zoom (
=
33) or digital tele-converter (
=
55).
To compose shots so that subjects are positioned at the edge or
in a corner, rst aim the camera to capture the subject in an AF
frame, and then hold the shutter button halfway down. As you
continue to hold the shutter button halfway, recompose the shot
as desired, and then press the shutter button all the way down
(Focus Lock).
The AF frame position is enlarged when you press the shutter
button halfway and [AF-Point Zoom] (
=
39) is set to [On].
Shooting Distant Subjects (Innity)
Still Images
Movies
To restrict the focus to distant subjects, set the camera to [ ]. For details
on the focusing range, see “Shooting Range” (
=
116).
Press the [
] button, press the [ ][ ]
buttons to choose [ ], and then press
the [ ] button.
Once the setting is complete, [
] is
displayed.
Digital Tele-Converter
Still Images
Movies
The focal length of the lens can be increased by approximately 1.6x or
2.0x. This can reduce camera shake because the shutter speed is faster
than it would be if you zoomed (including using digital zoom) in to the
same zoom factor.
Press the [
] button, choose
[Digital Zoom] on the [ ] tab, and then
choose the desired option (
=
25).
The view is enlarged and the zoom factor
is displayed on the screen.
The digital tele-converter cannot be used with digital zoom
(
=
33) or AF-point zoom (
=
39).
The shutter speed may be equivalent when you move the zoom
lever all the way toward [
] for maximum telephoto, and when
you zoom in to enlarge the subject to the same size following step
2 in “Zooming In Closer on Subjects (Digital Zoom)” (
=
33).
56
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Choosing Subjects to Focus On (Tracking AF)
Still Images
Movies
Shoot after choosing a subject to focus on as follows.
1
Choose [Tracking AF].
Follow the steps in “Changing the AF
Frame Mode” (
=
55) to choose
[Tracking AF].
[ ] is displayed in the center of the screen.
2
Choose a subject to focus on.
Aim the camera so that [ ] is on the
desired subject, and then press the [ ]
button.
When the subject is detected, the camera
beeps and [
] is displayed. Even if the
subject moves, the camera will continue
to track the subject within a certain range.
If no subject is detected, [
] is displayed.
To cancel tracking, press the [
] button
again.
3
Shoot.
Press the shutter button halfway. [ ]
changes to a blue [ ], which follows
the subject as the camera continues to
adjust the focus and exposure (Servo AF)
(
=
57).
Press the shutter button all the way down
to shoot.
Even after your shot, [
] is still displayed
and the camera continues to track the
subject.
Face AiAF
Still Images
Movies
Detects people’s faces, and then sets the focus, exposure (evaluative
metering only), and white balance ([ ] only).
After you aim the camera at the subject, a white frame is displayed
around the person’s face determined by the camera to be the main
subject, and up to two gray frames are displayed around other
detected faces.
When the camera detects movement, frames will follow moving
subjects, within a certain range.
After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in
the areas in focus when you press the shutter button halfway.
If faces are not detected when Servo AF (
=
57) is set to [On],
the AF frame is displayed in the center of the screen when you
press the shutter button halfway.
Examples of faces that cannot be detected:
- Subjects that are distant or extremely close
- Subjects that are dark or light
- Faces in prole, at an angle, or partly hidden
The camera may misinterpret non-human subjects as faces.
No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
57
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Focusing may not be possible in some shooting conditions.
In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway.
In this case, the focus and exposure are set according to the
specied AF frame mode.
If adequate exposure cannot be obtained, shutter speeds and
aperture values are displayed in orange. Release the shutter
button, and then press it halfway again.
AF lock shooting is not available.
[AF-Point Zoom] on the [
] tab (
=
25) is not available.
Not available when using the self-timer (
=
33).
Changing the Focus Setting
Still Images
Movies
You can change default camera operation of constantly focusing on
subjects it is aimed at, even when the shutter button is not pressed.
Instead, you can limit camera focusing to the moment you press the
shutter button halfway.
Press the [
] button, choose
[Continuous AF] on the [ ] tab, and then
choose [Off] (
=
25).
On
Helps avoid missing sudden photo opportunities, because
the camera constantly focuses on subjects until you press
the shutter button halfway.
Off
Conserves battery power, because the camera does not
focus constantly.
[Servo AF] (
=
57) is set to [On] and cannot be changed.
Tracking may not be possible when subjects are too small or
move too rapidly, or when subject color or brightness matches
that of the background too closely.
[AF-Point Zoom] on the [
] tab (
=
25) is not available.
[
] and [ ] are not available.
The camera can detect subjects even if you press the shutter
button halfway without pressing the [
] button. After your shot,
[
] is displayed in the center of the screen.
Shooting with Servo AF
Still Images
Movies
This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long
as you press the shutter button halfway.
1
Congure the setting.
Press the [ ] button, choose [Servo
AF] on the [ ] tab, and then choose [On]
(
=
25).
2
Focus.
The focus and exposure are maintained
where the blue AF frame is displayed
while you are pressing the shutter button
halfway.
58
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Flash
Changing the Flash Mode
Still Images
Movies
You can change the ash mode to match the shooting scene. For details
on the ash range, see “Flash Range” (
=
116).
1
Lift the ash.
2
Congure the setting.
Press the [ ] button, press the [ ][ ]
buttons to choose a ash mode, and then
press the [ ] button.
The option you congured is now
displayed.
The setting screen cannot be accessed by pressing the [ ]
button when the ash is lowered. Lift the ash with your nger in
advance.
Auto
Fires automatically in low-light conditions.
On
Fires for each shot.
Slow Synchro
Fires to illuminate the main subject (such as people) while shooting at a
slower shutter speed to illuminate backgrounds out of ash range.
Shooting with the AF Lock
Still Images
Movies
The focus can be locked. After you lock the focus, the focal position will
not change even when you release your nger from the shutter button.
1
Lock the focus.
With the shutter button pressed halfway,
press the [ ] button.
The focus is now locked, and [
] is
displayed.
To unlock the focus, release the shutter
button and press the [
] button again. In
this case, [ ] is no longer displayed.
2
Compose the shot and shoot.
59
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Other Settings
Changing the Compression Ratio (Image Quality)
Still Images
Movies
Choose from two compression ratios, [ ] (Super Fine) and [ ] (Fine), as
follows. For guidelines on how many shots at each compression ratio can
t on a memory card, see “Number of Shots per Memory Card” (
=
115).
Press the [
] button, choose [ ] in the
menu, and choose the desired option
(
=
24).
In [ ] mode, mount the camera on a tripod or take other
measures to keep it still and prevent camera shake. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other
means to secure the camera (
=
60).
In [
] mode, even after the ash res, ensure that the main
subject does not move until the shutter sound is nished playing.
Off
For shooting without the ash.
If a blinking [ ] icon is displayed when you press the shutter
button halfway in camera-shake inducing, low-light conditions,
mount the camera on a tripod or take other measures to keep it still.
Shooting with the FE Lock
Still Images
Movies
Just as with the AE lock (
=
50), you can lock the exposure for the ash shots.
1
Lift the ash and set the ash to [ ]
(=
58).
2
Lock the ash exposure.
Aim the camera at the subject to shoot with
the exposure locked. With the shutter button
pressed halfway, press the [ ] button.
The ash res, and when [ ] is displayed,
the ash output level is retained.
To unlock FE, release the shutter button
and press the [ ] button again. In this
case, [ ] is no longer displayed.
3
Compose the shot and shoot.
FE: Flash Exposure
60
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Shooting Movies with Subjects at the Same Size
Shown before Shooting
Still Images
Movies
Normally, once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of signicant camera
shake. To shoot subjects at the same size shown before shooting, you can
choose not to reduce signicant camera shake.
Follow the steps in “Changing the IS
Mode Settings” (
=
60) to access the
[IS Settings] screen.
Choose [Dynamic IS], and then choose
[2] (
=
25).
You can also set [IS Mode] to [Off], so that subjects are recorded
at the same size shown before shooting.
Changing the IS Mode Settings
Still Images
Movies
1
Access the setting screen.
Press the [ ] button, choose [IS
Settings] on the [ ] tab, and then press
the [ ] button (
=
25).
2
Congure the setting.
Choose [IS Mode], and then choose the
desired option (
=
25).
Continuous
Optimal image stabilization for the shooting conditions is
automatically applied (Intelligent IS) (
=
32).
Shoot Only*
Image stabilization is active only at the moment of
shooting.
Off Deactivates image stabilization.
* The setting is changed to [Continuous] for movie recording.
If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [Off].
61
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Viewing
Still Images
Movies
After shooting images or movies, you can view them on the screen as
follows.
1
Enter Playback mode.
Press the [ ] button.
Your last shot is displayed.
2
Browse through your images.
To view the previous image, press the [ ]
button. To view the next image, press the
[ ] button.
To access this screen (Scroll Display
mode), press and hold the [
][ ] buttons
for at least one second. In this mode,
press the [ ][ ] buttons to browse
through images.
To return to single-image display, press
the [
] button.
To browse images grouped by shooting
date, press the [
][ ] buttons in Scroll
Display mode.
5
Playback Mode
Have fun reviewing your shots, and browse or edit them in many ways
To prepare the camera for these operations, press the [
] button to
enter Playback mode.
It may not be possible to play back or edit images that were
renamed or already edited on a computer, or images from other
cameras.
62
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Switching Display Modes
Still Images
Movies
Press the [ ] button to view other information on the screen, or
to hide the information. For details on the information displayed, see
“Playback (Detailed Information Display)” (
=
106).
No Information Display
Simple Information Display
Detailed Information Display
Overexposure Warning (for Image Highlights)
Still Images
Movies
Washed-out highlights in the image ash on the screen in detailed
information display (
=
62).
Movies are identied by a [
] icon.
To play movies, go to step 3.
3
Play movies.
To start playback, press the [ ] button,
press the [ ][ ] buttons to choose [ ],
and then press the [ ] button again.
4
Adjust the volume.
Press the [ ][ ] buttons to adjust the
volume.
To adjust the volume when the volume
indicator (1) is no longer displayed, press
the [
][ ] buttons.
5
Pause playback.
To pause or resume playback, press the
[ ] button.
After the movie is nished, [
] is
displayed.
To switch to Shooting mode from Playback mode, press the
shutter button halfway.
To deactivate Scroll Display, choose MENU (
=
25) ► [ ] tab
► [Scroll Display] ► [Off].
To have the most recent shot displayed when you enter Playback
mode, choose MENU (
=
25) ► [ ] tab ► [Resume] ►
[Last shot].
To change the transition shown between images, access MENU
(
=
25) and choose your desired effect on the [ ] tab ►
[Transition].
(
1
)
63
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Browsing and Filtering Images
Navigating through Images in an Index
Still Images
Movies
By displaying multiple images in an index, you can quickly nd the images
you are looking for.
1
Display images in an index.
Move the zoom lever toward [ ] to
display images in an index. Moving the
lever again will increase the number of
images shown.
To display fewer images, move the zoom
lever toward [
]. Fewer images are
shown each time you move the lever.
2
Choose an image.
Press the [ ][ ][ ][ ] buttons to choose
an image.
An orange frame is displayed around the
selected image.
Press the [
] button to view the selected
image in single-image display.
Histogram
Still Images
Movies
The graph in detailed information display
(
=
62) is a histogram showing the
distribution of brightness in the image.
The horizontal axis represents the degree
of brightness, and the vertical axis, how
much of the image is at each level of
brightness. Viewing the histogram is a
way to check exposure.
64
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
To show or hide information, press the [ ] button in step 2.
Options for viewing the images found (in step 2) include
“Navigating through Images in an Index” (
=
63), “Magnifying
Images” (
=
65), and “Viewing Slideshows” (
=
65). You can
also apply image operations to all images found, by choosing
[Protect All Images in Search] in “Protecting Images” (
=
67) or
[Select All Images in Search] in “Erasing Multiple Images at Once”
(
=
69), “Adding Images to the Print List (DPOF)” (
=
95), or
“Adding Images to a Photobook” (
=
97).
If you edit images and save them as new images (
=
73 –
=
76), a message is displayed, and the images that were
found are no longer shown.
Finding Images Matching Specied Conditions
Still Images
Movies
Find desired images quickly on a memory card full of images by ltering
image display according to your specied conditions. You can also protect
(
=
67) or delete (
=
69) these images all at once.
People
Displays images with detected faces.
Date
Displays the images shot on a specic date.
Favorites
Displays images tagged as favorites (
=
72).
Still image/Movie
Displays only still images or movies.
1
Choose a search condition.
Press the [ ] button, choose [ ] in the
menu, and choose a condition (
=
24).
When you have selected [
] or [ ],
choose the condition by pressing the
[ ][ ][ ][ ] buttons on the screen
displayed, and then press the [ ] button.
2
View the ltered images.
Images matching your conditions are
displayed in yellow frames. To view only
these images, press the [ ][ ] buttons.
To cancel ltered display, choose [
] in
step 1.
When the camera has found no corresponding images for some
conditions, those conditions will not be available.
65
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Viewing Slideshows
Still Images
Movies
Automatically play back images from a memory card as follows. Each
image is displayed for about three seconds.
Press the [
] button, choose [ ] in the
menu, and choose the desired option
(
=
24).
The slideshow will start after [Loading
image] is displayed for a few seconds.
Press the [
] button to stop the
slideshow.
The camera’s power-saving functions (
=
23) are deactivated
during slideshows.
To pause or resume slideshows, press the [ ] button.
You can switch to other images during playback by pressing the
[
][ ] buttons. For fast-forward or fast-rewind, hold the [ ][ ]
buttons down.
In ltered display (
=
64), only images matching search
conditions are played.
Image Viewing Options
Magnifying Images
Still Images
Movies
1
Magnify an image.
Moving the zoom lever toward [ ] will
zoom in and magnify the image, and
[ ] is displayed. You can magnify
images up to about 10x by continuing to
hold the zoom lever.
The approximate position of the displayed
area (1) is shown for reference.
To zoom out, move the zoom lever
toward [
]. You can return to single-
image display by continuing to hold it.
2
Move the display position and
switch images as needed.
To move the display position, press the
[ ][ ][ ][ ] buttons.
While [
] is displayed, you can switch
to [ ] by pressing the [ ] button. To
switch to other images while zoomed,
press the [ ][ ] buttons. Press the
[ ] button again to restore the original
setting.
You can return to single-image display from magnied display by
pressing the [
] button.
(
1
)
66
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Auto Playback of Related Images (Smart Shufe)
Still Images
Movies
Based on the current image, the camera offers four images that you may
wish to view. After you choose to view one of those images, the camera
offers four more images. This is an enjoyable way to play back images in
an unexpected order. Try this feature after you have taken many shots, in
many kinds of scenes.
1
Choose Smart Shufe.
Press the [ ] button, and then choose
[ ] in the menu (
=
24).
Four candidate images are displayed.
2
Choose an image.
Press the [ ][ ][ ][ ] buttons to choose
the image you want to view next.
Your chosen image is displayed in the
center, surrounded by the next four
candidate images.
For full-screen display of the center
image, press the [
] button. To restore
the original display, press the [ ] button
again.
Press the [
] button to restore
single-image display.
Smart Shufe is not available in the following cases:
- There are less than 50 shots taken with this camera
- An unsupported image is currently displayed
- Images are shown in ltered display (
=
64)
Changing Slideshow Settings
You can set up slideshows to repeat, and you can change the transitions
between images and the display duration of each image.
1
Access the setting screen.
Press the [ ] button, and then
choose [Slideshow] on the [ ] tab
(
=
25).
2
Congure the settings.
Choose a menu item to congure, and
then choose the desired option (
=
25).
To start the slideshow with your settings,
choose [Start] and press the [
] button.
To return to the menu screen, press the
[
] button.
[Play Time] cannot be modied when [Bubble] is chosen in [Effect].
67
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Using the Menu
1
Access the setting screen.
Press the [ ] button and choose
[Protect] on the [ ] tab (
=
25).
2
Choose a selection method.
Choose a menu item and an option as
desired (
=
25).
To return to the menu screen, press the
[
] button.
Choosing Images Individually
1
Choose [Select].
Following step 2 in “Using the Menu”
(
=
67), choose [Select] and press the
[
] button.
2
Choose an image.
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
[ ] is displayed.
To cancel selection, press the [
] button
again. [ ] is no longer displayed.
Repeat this process to specify other
images.
Protecting Images
Still Images
Movies
Protect important images to prevent accidental erasure by the camera
(
=
69).
Press the [
] button, and then choose
[ ] in the menu (
=
24). [Protected]
is displayed.
To cancel protection, repeat this process
and choose [
] again, and then press
the [ ] button.
Protected images on a memory card will be erased if you format
the card (
=
80,
=
81).
Protected images cannot be erased using the camera’s erasure
function. To erase them this way, rst cancel protection.
68
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
3
Choose an ending image.
Press the [ ] button to choose [Last
image], and then press the [ ] button.
Press the [
][ ] buttons to choose an
image, and then press the [ ] button.
Images before the rst image cannot be
selected as the last image.
4
Protect the images.
Press the [ ] button to choose [Protect],
and then press the [ ] button.
To cancel protection for groups of images, choose [Unlock] in
step 4.
3
Protect the image.
Press the [ ] button. A conrmation
message is displayed.
Press the [
][ ] buttons to choose [OK],
and then press the [ ] button.
Images will not be protected if you switch to Shooting mode or
turn the camera off before nishing the setup process in step 3.
Selecting a Range
1
Choose [Select Range].
Following step 2 in “Using the Menu”
(
=
67), choose [Select Range] and
press the [ ] button.
2
Choose a starting image.
Press the [ ] button.
Press the [
][ ] buttons to choose an
image, and then press the [ ] button.
69
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Erasing Images
Still Images
Movies
You can choose and erase unneeded images one by one. Be careful
when erasing images, because they cannot be recovered. However,
protected images (
=
67) cannot be erased.
1
Choose an image to erase.
Press the [ ][ ] buttons to choose an
image.
2
Erase the image.
Press the [ ] button.
After [Erase?] is displayed, press the
[
][ ] buttons to choose [Erase], and
then press the [ ] button.
The current image is now erased.
To cancel erasure, press the [
][ ]
buttons to choose [Cancel], and then
press the [ ] button.
Erasing Multiple Images at Once
You can choose multiple images to erase at once. Be careful when
erasing images, because they cannot be recovered. However, protected
images (
=
67) cannot be erased.
Choosing a Selection Method
1
Access the setting screen.
Press the [ ] button, and then
choose [Erase] on the [ ] tab (
=
25).
Protecting All Images at Once
1
Choose [Protect All Images].
Following step 2 in “Using the Menu”
(
=
67), choose [Protect All Images]
and press the [ ] button.
2
Protect the images.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Clearing All Protection at Once
You can clear protection from all images at once.
To clear protection, choose [Unprotect All Images] in step 1 of “Protecting
All Images at Once”, and then complete step 2.
70
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Selecting a Range
1
Choose [Select Range].
Following step 2 in “Choosing a Selection
Method” (
=
69), choose [Select
Range] and press the [ ] button.
2
Choose images.
Follow steps 2 – 3 in “Selecting a Range”
(
=
68) to specify images.
3
Erase the images.
Press the [ ] button to choose [Erase],
and then press the [ ] button.
Specifying All Images at Once
1
Choose [Select All Images].
Following step 2 in “Choosing a Selection
Method” (
=
69), choose [Select All
Images] and press the [ ] button.
2
Erase the images.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
2
Choose a selection method.
Press the [ ][ ] buttons to choose a
selection method, and then press the [ ]
button.
To return to the menu screen, press the
[
] button.
Choosing Images Individually
1
Choose [Select].
Following step 2 in “Choosing a Selection
Method” (
=
69), choose [Select] and
press the [ ] button.
2
Choose an image.
Once you choose an image following
step 2 in “Choosing Images Individually”
(
=
67), [ ] is displayed.
To cancel selection, press the [
] button
again. [ ] is no longer displayed.
Repeat this process to specify other
images.
3
Erase the image.
Press the [ ] button. A conrmation
message is displayed.
Press the [
][ ] buttons to choose [OK],
and then press the [ ] button.
71
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
2
Rotate the image.
Press the [ ][ ] buttons to choose an
image.
The image is rotated 90° each time you
press the [
] button.
To return to the menu screen, press the
[
] button.
Rotation is not possible when [Auto Rotate] is set to [Off]
(
=
71).
Deactivating Auto Rotation
Follow these steps to deactivate automatic image rotation, which rotates
images based on the current camera orientation.
Press the [
] button, choose [Auto
Rotate] on the [ ] tab, and then choose
[Off] (
=
25).
Images cannot be rotated (
=
71) when you set [Auto Rotate]
to [Off]. Additionally, images already rotated will be displayed in
the original orientation.
In Smart Shufe (
=
66) mode, even if [Auto Rotate] is set
to [Off], images shot vertically will be displayed vertically, and
rotated images will be displayed in the rotated orientation.
Rotating Images
Still Images
Movies
Change the orientation of images and save them as follows.
1
Choose [ ].
Press the [ ] button, and then choose
[ ] in the menu (
=
24).
2
Rotate the image.
Press the [ ] or [ ] button, depending
on the desired direction. Each time you
press the button, the image is rotated
90°. Press the [ ] button to complete the
setting.
Using the Menu
1
Choose [Rotate].
Press the [ ] button and choose
[Rotate] on the [ ] tab (
=
25).
72
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
2
Choose an image.
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
[ ] is displayed.
To untag the image, press the [
] button
again. [ ] is no longer displayed.
Repeat this process to choose additional
images.
3
Finish the setup process.
Press the [ ] button. A conrmation
message is displayed.
Press the [
][ ] buttons to choose [OK],
and then press the [ ] button.
Images will not be tagged as favorites if you switch to Shooting
mode or turn the camera off before nishing the setup process in
step 3.
Favorite images will have a three-star rating ( )
when transferred to computers running Windows 8 or Windows 7.
(Does not apply to movies.)
Tagging Images as Favorites
Still Images
Movies
You can organize images by tagging them as favorites. By choosing a
category in ltered playback, you can restrict the following operations to
all of those images.
“Viewing” (
=
61), “Viewing Slideshows” (
=
65), “Protecting
Images” (
=
67), “Erasing Images” (
=
69), “Adding Images to
the Print List (DPOF)” (
=
95), “Adding Images to a Photobook”
(
=
97)
Press the [
] button, and then choose
[ ] in the menu (
=
24).
[Tagged as Favorite] is displayed.
To untag the image, repeat this process
and choose [
] again, and then press
the [ ] button.
Using the Menu
1
Choose [Favorites].
Press the [ ] button and choose
[Favorites] on the [ ] tab (
=
25).
73
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
5
Review the new image.
Press the [ ] button. [Display new
image?] is displayed.
Press the [
][ ] buttons to choose [Yes],
and then press the [ ] button.
The saved image is now displayed.
Editing is not possible for images shot at a resolution of [ ]
(
=
37).
Images cannot be resized to a higher resolution.
Cropping
Still Images
Movies
You can specify a portion of an image to save as a separate image le.
1
Choose [Cropping].
Press the [ ] button, and then
choose [Cropping] on the [ ] tab
(
=
25).
2
Choose an image.
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
Editing Still Images
Image editing (
=
73 –
=
75) is only available when the
memory card has sufcient free space.
Resizing Images
Still Images
Movies
Save a copy of images at a lower resolution.
1
Choose [Resize].
Press the [ ] button and choose
[Resize] on the [ ] tab (
=
25).
2
Choose an image.
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
3
Choose an image size.
Press the [ ][ ] buttons to choose the
size, and then press the [ ] button.
[Save new image?] is displayed.
4
Save the new image.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
The image is now saved as a new le.
74
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Changing Image Color Tones (My Colors)
Still Images
Movies
You can adjust image colors and then save the edited image as a
separate le. For details on each option, see “Changing Image Color
Tones (My Colors)” (
=
53).
1
Choose [My Colors].
Press the [ ] button, and then
choose [My Colors] on the [ ] tab
(
=
25).
2
Choose an image.
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
3
Choose an option.
Press the [ ][ ] buttons to choose an
option, and then press the [ ] button.
4
Save as a new image and review.
Follow steps 4 – 5 in “Resizing Images”
(
=
73).
Image quality of pictures you repeatedly edit this way will be
a little lower each time, and you may not be able to obtain the
desired color.
The color of images edited using this function may vary slightly
from the color of images shot using My Colors (
=
53).
3
Adjust the cropping area.
A frame is displayed around the portion of
the image to be cropped (1).
The original image is shown in the upper
left, and a preview of the image as
cropped (2) is shown in the lower right.
You can also see the resolution after
cropping (3).
To resize the frame, move the zoom
lever.
To move the frame, press the
[
][ ][ ][ ] buttons.
To change the frame orientation, press
the [
] button.
Faces detected in the image are
enclosed in gray frames in the upper-left
image. To crop the image based on this
frame, press the [
] button to switch to
the other frame.
Press the [
] button.
4
Save as a new image and review.
Follow steps 4 – 5 in “Resizing Images”
(
=
73).
Editing is not possible for images shot at a resolution of [ ]
(
=
37) or resized to [ ] (
=
73).
Images supported for cropping will have the same aspect ratio
after cropping.
Cropped images will have a lower resolution than uncropped
images.
(
1
) (
2
) (
3
)
75
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Correcting Red-Eye
Still Images
Movies
Automatically corrects images affected by red-eye. You can save the
corrected image as a separate le.
1
Choose [Red-Eye Correction].
Press the [ ] button, and then
choose [Red-Eye Correction] on the [ ]
tab (
=
25).
2
Choose an image.
Press the [ ][ ] buttons to choose an
image.
3
Correct the image.
Press the [ ] button.
Red-eye detected by the camera is now
corrected, and frames are displayed
around corrected image areas.
Enlarge or reduce images as needed.
Follow the steps in “Magnifying Images”
(
=
65).
4
Save as a new image and review.
Press the [ ][ ][ ][ ] buttons to choose
[New File], and then press the [ ] button.
The image is now saved as a new le.
Follow step 5 in “Resizing Images”
(
=
73).
Some images may not be corrected accurately.
To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be
erased.
Protected images cannot be overwritten.
Correcting Image Brightness (i-Contrast)
Still Images
Movies
Excessively dark image areas (such as faces or backgrounds) can be
detected and automatically adjusted to the optimal brightness. Insufcient
overall image contrast is also automatically corrected, to make subjects
stand out better. Choose from four correction levels, and then save the
image as a separate le.
1
Choose [i-Contrast].
Press the [ ] button, and then
choose [i-Contrast] on the [ ] tab
(
=
25).
2
Choose an image.
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
3
Choose an option.
Press the [ ][ ] buttons to choose an
option, and then press the [ ] button.
4
Save as a new image and review.
Follow steps 4 – 5 in “Resizing Images”
(
=
73).
For some images, correction may be inaccurate or may cause
images to appear grainy.
Images may look grainy after repeated editing using this function.
If [Auto] does not produce the expected results, try correcting
images using [Low], [Medium], or [High].
76
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
3
Review the edited movie.
Press the [ ][ ] buttons to choose [ ],
and then press the [ ] button. The edited
movie is now played.
To edit the movie again, repeat step 2.
To cancel editing, press the [
][ ]
buttons to choose [ ]. Press the [ ]
button, press the [ ][ ] buttons to choose
[OK], and then press the [ ] button
again.
4
Save the edited movie.
Press the [ ][ ] buttons to choose [ ],
and then press the [ ] button.
Press the [
][ ][ ][ ] buttons to choose
[New File], and then press the [ ] button.
The movie is now saved as a new le.
To overwrite the original movie with the cut one, choose
[Overwrite] in step 4. In this case, the original movie will be
erased.
If the memory card lacks sufcient space, only [Overwrite] will be
available.
Movies may not be saved if the battery pack runs out while saving
is in progress.
When editing movies, you should use a fully charged battery pack
or an AC adapter kit (sold separately,
=
85).
Editing Movies
Still Images
Movies
You can cut movies to remove unneeded portions at the beginning or end.
1
Choose [ ].
Following steps 1 – 5 in “Viewing”
(
=
61), choose [ ] and press the [ ]
button.
The movie editing panel and editing bar
are now displayed.
2
Specify portions to cut.
(1) is the movie editing panel, and (2) is
the editing bar.
Press the [
][ ] buttons to choose [ ]
or [ ].
To view the portions you can cut
(identied by [
] on the screen), press
the [ ][ ] buttons to move [ ]. Cut the
beginning of the movie (from [ ]) by
choosing [ ], and cut the end of the
movie by choosing [ ].
If you move [
] to a position other than a
[ ] mark, in [ ] the portion before the
nearest [ ] mark on the left will be cut,
while in [ ] the portion after the nearest
[ ] mark on the right will be cut.
(
1
)
(
2
)
77
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Adjusting Basic Camera Functions
MENU (
=
25) functions on the [ ] tab can be congured. Customize
commonly used functions as desired, for greater convenience.
Silencing Camera Operations
Silence camera sounds and movies as follows.
Choose [Mute], and then choose [On].
Operation can also be silenced by holding down the [ ]
button as you turn the camera on.
Sound is not played during movies (
=
61) if you mute camera
sounds. To restore sound during movies, press the [
] button.
Adjust volume with the [
][ ] buttons, as needed.
Adjusting the Volume
Adjust the volume of individual camera sounds as follows.
Choose [Volume], and then press the [
]
button.
Choose an item, and then press the
[
][ ] buttons to adjust the volume.
6
Setting Menu
Customize or adjust basic camera functions for greater convenience
78
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
World Clock
To ensure that your shots will have the correct local date and time when
you travel abroad, simply register the destination in advance and switch to
that time zone. This convenient feature eliminates the need to change the
Date/Time setting manually.
Before using the world clock, be sure to set the date and time and your
home time zone, as described in “Setting the Date and Time” (
=
17).
1
Specify your destination.
Choose [Time Zone], and then press the
[ ] button.
Press the [
][ ] buttons to choose
[ World], and then press the [ ] button.
Press the [
][ ] buttons to choose the
destination.
To set daylight saving time (1 hour
ahead), choose [
] by pressing the
[ ][ ] buttons, and then choose [ ] by
pressing the [ ][ ] buttons.
Press the [
] button.
2
Switch to the destination time zone.
Press the [ ][ ] buttons to choose
[ World], and then press the [ ]
button.
[
] is now shown on the shooting screen
(
=
105).
Adjusting the date or time while in [ ] mode (
=
17) will
automatically update your [
Home] time and date.
Hiding Hints and Tips
Hints and tips are normally shown when you choose FUNC. (
=
24) or
MENU (
=
25) items. If you prefer, you can deactivate this information.
Choose [Hints & Tips], and then choose
[Off].
Date and Time
Adjust the date and time as follows.
Choose [Date/Time], and then press the
[
] button.
Press the [
][ ] buttons to choose an
option, and then press the [ ][ ] buttons
to adjust the setting.
79
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto
Power Down and Display Off, respectively) as needed (
=
23).
Choose [Power Saving], and then press
the [
] button.
After choosing an item, press the [
][ ]
buttons to adjust it as needed.
To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
The [Display Off] setting is applied even if you set [Auto Power
Down] to [Off].
These power-saving functions are not available when you have
set Eco mode (
=
79) to [On].
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press
the [ ] button in Shooting mode (
=
22). To have the lens retracted
immediately after you press the [ ] button, set the retraction timing to
[0 sec.].
Choose [Lens Retraction], and then
choose [0 sec.].
Using Eco Mode
This function allows you to conserve battery power in Shooting mode.
When the camera is not in use, the screen quickly darkens to reduce
battery consumption.
1
Congure the setting.
Choose [Eco Mode], and then choose [On].
[ ] is now shown on the shooting
screen (
=
105).
The screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns off.
The camera turns off after approximately
three minutes of inactivity.
2
Shoot.
To activate the screen and prepare for
shooting when the screen is off but the
lens is still out, press the shutter button
halfway.
80
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Formatting Memory Cards
Before using a new memory card or a card formatted in another device,
you should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy
images on the memory card to a computer, or take other steps to back
them up.
An Eye-Fi card (
=
99) contains software on the card itself. Before
formatting an Eye-Fi card, install the software on a computer.
1
Access the [Format] screen.
Choose [Format], and then press the [ ]
button.
2
Choose [OK].
Press the [ ][ ] buttons to choose
[Cancel], press the [ ][ ] buttons to
choose [OK], and then press the [ ]
button.
3
Format the memory card.
To begin the formatting process, press
the [ ][ ] buttons to choose [OK], and
then press the [ ] button.
When formatting is nished, [Memory
card formatting complete] is displayed.
Press the [
] button.
Formatting or erasing data on a memory card only changes le
management information on the card and does not erase the data
completely. When transferring or disposing of memory cards,
take steps to protect personal information if necessary, as by
physically destroying cards.
Screen Brightness
Adjust screen brightness as follows.
Choose [LCD Brightness], and then
press the [
][ ] buttons to adjust the
brightness.
For maximum brightness, press and hold the [ ] button
for at least one second when the shooting screen is displayed
or when in single-image display. (This will override the [LCD
Brightness] setting on the [
] tab.) To restore the original
brightness, press and hold the [
] button again for at least
one second or restart the camera.
Hiding the Start-Up Screen
If you prefer, you can deactivate display of the start-up screen normally
shown when you turn the camera on.
Choose [Start-up Image], and then
choose [Off].
81
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
File Numbering
Your shots are automatically numbered in sequential order (0001 – 9999)
and saved in folders that store up to 2,000 images each. You can change
how the camera assigns le numbers.
Choose [File Numbering], and then
choose an option.
Continuous
Images are numbered consecutively (until the 9999th
shot is taken/saved) even if you switch memory
cards.
Auto Reset
Image numbering is reset to 0001 if you switch
memory cards, or when a new folder is created.
Regardless of the option selected in this setting, shots may be
numbered consecutively after the last number of existing images
on newly inserted memory cards. To start saving shots from 0001,
use an empty (or formatted (
=
80)) memory card.
Refer to “Software Instruction Manual” (
=
89) for information
on the card folder structure and image formats.
The total card capacity indicated on the formatting screen may be
less than the advertised capacity.
Low-Level Formatting
Perform low-level formatting in the following cases: [Memory card error] is
displayed, the camera is not working correctly, card image reading/writing
is slower, continuous shooting is slower, or movie recording suddenly
stops. Low-level formatting erases all data on a memory card. Before low-
level formatting, copy images on the memory card to a computer, or take
other steps to back them up.
On the screen in step 2 of “Formatting
Memory Cards” (
=
80), press the
[
][ ] buttons to choose [Low Level
Format], and then press the [ ][ ]
buttons to select this option. A [ ] icon is
displayed.
Follow steps 2 – 3 in “Formatting Memory
Cards” (
=
80) to continue with the
formatting process.
Low-level formatting takes longer than “Formatting Memory
Cards” (
=
80), because data is erased from all storage regions
of the memory card.
You can cancel low-level formatting in progress by choosing
[Stop]. In this case, all data will be erased, but the memory card
can be used normally.
82
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Display Language
Change the display language as needed.
Choose [Language
], and then press
the [ ] button.
Press the [
][ ][ ][ ] buttons to choose
a language, and then press the [ ]
button.
You can also access the [Language] screen in Playback mode by
pressing and holding the [
] button and immediately pressing
the [
] button.
Adjusting Other Settings
The following settings can also be adjusted on the [ ] tab.
[Video System] (
=
87)
[Eye-Fi Settings] (
=
99)
Date-Based Image Storage
Instead of saving images in folders created each month, you can have the
camera create folders each day you shoot to store shots taken that day.
Choose [Create Folder], and then choose
[Daily].
Images will now be saved in folders
created on the shooting date.
Checking Certication Logos
Some logos for certication requirements met by the camera can be
viewed on the screen. Other certication logos are printed in this guide, on
the camera packaging, or on the camera body.
Choose [Certication Logo Display], and
then press the [
] button.
83
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Restoring Defaults
If you accidentally change a setting, you can restore default camera
settings.
1
Access the [Reset All] screen.
Choose [Reset All], and then press the
[ ] button.
2
Restore default settings.
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Default settings are now restored.
The following functions are not restored to default settings.
- [
] tab settings [Date/Time] (
=
78), [Time Zone] (
=
78),
[Language
] (
=
82), and [Video System] (
=
87)
- Custom white balance data you have recorded (
=
53)
- Shooting mode (
=
43)
84
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
System Map
Wrist Strap
Battery Pack
NB-11LH*
1
Battery Charger
CB-2LF/CB-2LFE*
1
USB Cable (camera end: Mini-B)*
2
Memory Card
Card Reader
Computer
TV/Video
System
AC Adapter Kit
ACK-DC90
Included Accessories
Power Cables
AV Cable AVC-DC400
Flash Unit
PictBridge-Compatible Printers
High-Power Flash
HF-DC2
Lens Cap
(with cord)
*1 Also available for purchase separately.
*2 A genuine Canon accessory is also available (Interface Cable IFC-400PCU).
7
Accessories
Enjoy the camera in more ways with optional Canon accessories and
other compatible accessories sold separately
85
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Optional Accessories
The following camera accessories are sold separately. Note that
availability varies by area, and some accessories may no longer be
available.
Power Supplies
Battery Pack NB-11LH
Rechargeable lithium-ion battery
Battery Charger CB-2LF/CB-2LFE
Charger for Battery Pack NB-11LH
The battery pack includes a convenient cover which you can
attach to know the charge status at a glance. Attach the cover so
that
is visible on a charged battery pack, and attach it so that
is not visible on an uncharged battery pack.
Battery Pack NB-11L is also supported.
Battery Charger CB-2LD and CB-2LDE are also supported.
AC Adapter Kit ACK-DC90
For powering the camera using
household power. Recommended when
using the camera over extended periods,
or when connecting the camera to a
printer or computer. Cannot be used to
charge the battery pack in the camera.
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used
with genuine Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents
such as re, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please
note that this warranty does not apply to repairs arising out of the
malfunction of non-genuine Canon accessories, although you may request
such repairs on a chargeable basis.
86
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Printer
Canon-Brand PictBridge-Compatible
Printers
Even without using a computer, you can
print images by connecting the camera
directly to a printer.
For details, visit your nearest Canon
retailer.
The battery charger and AC adapter kit can be used in areas with
100 – 240 V AC power (50/60 Hz).
For power outlets in a different format, use a commercially
available adapter for the plug. Never use an electrical transformer
designed for traveling, which may damage the battery pack.
Flash Unit
High-Power Flash HF-DC2
External ash for illuminating subjects
that are out of range of the built-in ash.
Other Accessories
Interface Cable IFC-400PCU
For connecting the camera to a computer
or printer.
AV Cable AVC-DC400
Connect the camera to a TV to enjoy
playback on the larger TV screen.
87
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
3
Turn the TV on and switch to video
input.
Switch the TV input to the video input you
connected the cable to in step 2.
4
Turn the camera on.
Press the [ ] button to turn the camera
on.
Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
When nished, turn off the camera and
TV before disconnecting the cable.
Correct display is not possible unless the camera video output
format (NTSC or PAL) matches the TV format. To change the
video output format, press the [
] button and choose
[Video System] on the [
] tab.
Powering the Camera with Household Power
Still Images
Movies
Powering the camera with AC Adapter Kit ACK-DC90 (sold separately)
eliminates the need to monitor the remaining battery level.
1
Make sure the camera is off.
2
Open the cover.
Follow step 1 in “Inserting the Battery
Pack and Memory Card” (
=
16) to
open the memory card/battery cover, and
then open the coupler cable port cover
as shown.
(
1
)
(
2
)
Using Optional Accessories
Still Images
Movies
Playback on a TV
Still Images
Movies
Connecting the camera to a TV with the AV Cable AVC-DC400 (sold
separately) enables you to view your shots on the larger screen of the TV
as you control the camera.
For details on connection or how to switch inputs, refer to the TV manual.
Some information may not be displayed when viewing images on
a TV (
=
106).
1
Make sure the camera and TV are
off.
2
Connect the camera to the TV.
On the TV, insert the cable plugs fully into
the video inputs as shown.
Make sure the cable plugs are in video
inputs of the same color.
On the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.
88
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the
camera.
Do not attach the adapter or adapter cord to other objects. Doing
so could result in malfunction or damage to the product.
3
Insert the coupler.
Holding the coupler with the terminals (1)
facing as shown, insert the coupler just
as you would a battery pack (following
step 2 in “Inserting the Battery Pack and
Memory Card” (
=
16)).
Make sure the coupler cable passes
through the port (1).
4
Close the cover.
Lower the cover (1) and hold it down as
you slide it, until it clicks into the closed
position (2).
5
Connect the power cord.
Insert the adapter plug into the end of the
coupler cable.
Insert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
Turn the camera on and use it as desired.
When nished, turn the camera off and
unplug the power cord from the outlet.
(
1
)
(
1
)
(
1
)
(
2
)
89
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Checking Your Computer Environment
The software can be used on the following computers. For detailed
system requirements and compatibility information, including support in
new operating systems, visit the Canon website.
Operating
System
Windows Mac OS
Windows 8/8.1
Windows 7 SP1
Mac OS X 10.9
Mac OS X 10.8
Check the Canon website for the latest system requirements,
including supported OS versions.
Using the Software
The software available for download from the Canon website is introduced
below, with instructions for installation and saving images to a computer.
Software
After downloading the software from the Canon website and installing it,
you can do the following things on your computer.
CameraWindow
- Import images and change camera settings
ImageBrowser EX
- Manage images: view, search, and organize
- Print and edit images
Internet access is required, and any ISP account charges and
access fees must be paid separately.
Software Instruction Manual
Refer to the instruction manual when using the software. The manual can
be accessed from the help system of software (some software excluded).
90
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Saving Images to a Computer
Windows 7 and Mac OS X 10.8 are used here for the sake of illustration.
For other functions, refer to the help system of the relevant software
(some software excluded).
1
Connect the camera to the
computer.
With the camera turned off, open the
cover (1). With the smaller plug of the
USB cable in the orientation shown,
insert the plug fully into the camera
terminal (2).
Insert the larger plug of the USB cable
in the computers USB port. For details
about USB connections on the computer,
refer to the computer user manual.
2
Turn the camera on to access
CameraWindow.
Press the [ ] button to turn the camera
on.
Mac OS: CameraWindow is displayed
when a connection is established
between the camera and computer.
(
1
)
(
2
)
Installing the Software
Windows 7 and Mac OS X 10.8 are used here for the sake of illustration.
1
Download the software.
With a computer connected to the
Internet, access http://www.canon.com/
icpd/.
Access the site for your country or region.
Download the software.
2
Install the les.
Click [Easy Installation] and follow the
on-screen instructions to complete the
installation process.
Installation may take some time,
depending on computer performance and
the Internet connection.
Click [Finish] or [Restart] on the screen
after installation.
Using the software, you can update to the latest version,
and download new functions via the Internet (some software
excluded).
The rst time you connect the camera to the computer, drivers will
be installed, so it may take a few minutes until camera images are
accessible.
91
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Windows 7: If the screen in step 2 is not displayed, click the [ ]
icon in the taskbar.
Mac OS: If CameraWindow is not displayed after step 2, click the
[CameraWindow] icon in the Dock.
Although you can save images to a computer simply by
connecting your camera to the computer without using the
software, the following limitations apply.
- It may take a few minutes after you connect the camera to the
computer until camera images are accessible.
- Images shot in vertical orientation may be saved in horizontal
orientation.
- Image protection settings may be cleared from images saved
to a computer.
- Some problems may occur when saving images or image
information, depending on the operating system version, the
software in use, or image le sizes.
- Some functions provided by the software may not be available,
such as movie editing.
Windows: Follow the steps introduced
below.
In the screen that displays, click the [
]
link to modify the program.
Choose [Downloads Images From Canon
Camera] and then click [OK].
Double-click [
].
3
Save the images to the computer.
Click [Import Images from Camera], and
then click [Import Untransferred Images].
Images are now saved to the Pictures
folder on the computer, in separate
folders named by date.
After images are saved, close
CameraWindow, press the [
] button to
turn the camera off, and unplug the cable.
For instructions on viewing images on a
computer, refer to “Software Instruction
Manual” (
=
89).
92
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
4
Turn the camera on.
Press the [ ] button to turn the camera
on.
5
Choose an image.
Press the [ ][ ] buttons to choose an
image.
6
Access the printing screen.
Press the [ ] button, choose [ ], and
press the [ ] button again.
7
Print the image.
Press the [ ][ ] buttons to choose
[Print], and then press the [ ] button.
Printing now begins.
To print other images, repeat the above
procedures starting from step 5 after
printing is nished.
When you are nished printing, turn the
camera and printer off and disconnect
the cable.
For Canon-brand PictBridge-compatible printers (sold separately),
see “Printer” (
=
86).
Printing Images
Still Images
Movies
Your shots can easily be printed by connecting the camera to a printer.
On the camera, you can specify images to set up batch printing, prepare
orders for photo development services, and prepare orders or print
images for photobooks.
A Canon SELPHY CP series compact photo printer is used here for the
sake of illustration. Screens displayed and available functions vary by
printer. Also refer to the printer manual for additional information.
Easy Print
Still Images
Movies
Easily print your shots by connecting the camera to a PictBridge-
compatible printer (sold separately) with the USB cable.
1
Make sure the camera and printer
are off.
2
Connect the camera to the printer.
Open the terminal cover. Holding the
smaller cable plug in the orientation
shown, insert the plug fully into the
camera terminal.
Connect the larger cable plug to the
printer. For other connection details, refer
to the printer manual.
3
Turn the printer on.
93
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Cropping Images before Printing
Still Images
Movies
By cropping images before printing, you can print a desired image area
instead of the entire image.
1
Choose [Cropping].
After following step 1 in “Conguring Print
Settings” (
=
93) to access the printing
screen, choose [Cropping] and press the
[ ] button.
A cropping frame is now displayed,
indicating the image area to print.
2
Adjust the cropping frame as
needed.
To resize the frame, move the zoom
lever.
To move the frame, press the
[
][ ][ ][ ] buttons.
To rotate the frame, press the [
]
button.
When nished, press the [
] button.
3
Print the image.
Follow step 7 in “Easy Print” (
=
92)
to print.
Cropping may not be possible at small image sizes, or at some
aspect ratios.
Dates may not be printed correctly if you crop images shot with
[Date Stamp
] selected.
Conguring Print Settings
Still Images
Movies
1
Access the printing screen.
Follow steps 1 – 6 in “Easy Print”
(
=
92) to access this screen.
2
Congure the settings.
Press the [ ][ ] buttons to choose an
item, and then press the [ ][ ] buttons to
choose an option.
Default Matches current printer settings.
Date Prints images with the date added.
File No. Prints images with the le number added.
Both
Prints images with both the date and le
number added.
Off
Default Matches current printer settings.
Off
On
Uses information from the time of shooting to
print under optimal settings.
Red-Eye 1 Corrects red-eye.
No. of
Copies
Choose the number of copies to print.
Cropping
Specify a desired image area to print
(
=
93).
Paper
Settings
Specify the paper size, layout, and other
details (
=
94).
94
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Available Layout Options
Default Matches current printer settings.
Bordered Prints with blank space around the image.
Borderless Borderless, edge-to-edge printing.
N-up Choose how many images to print per sheet.
ID Photo
Prints images for identication purposes.
Only available for images with a resolution of L and an
aspect ratio of 4:3.
Fixed Size
Choose the print size.
Choose from 3.5 x 5 in., postcard, or wide-format prints.
Printing ID Photos
Still Images
Movies
1
Choose [ID Photo].
Following steps 1 – 4 in “Choosing
Paper Size and Layout before Printing”
(
=
94), choose [ID Photo] and press
the [ ] button.
2
Choose the long and short side
length.
Press the [ ][ ] buttons to choose an
item. Choose the length by pressing the
[ ][ ] buttons, and then press the [ ]
button.
Choosing Paper Size and Layout before Printing
Still Images
Movies
1
Choose [Paper Settings].
After following step 1 in “Conguring Print
Settings” (
=
93) to access the printing
screen, choose [Paper Settings] and
press the [ ] button.
2
Choose a paper size.
Press the [ ][ ] buttons to choose an
option, and then press the [
] button.
3
Choose a type of paper.
Press the [ ][ ] buttons to choose an
option, and then press the [ ] button.
4
Choose a layout.
Press the [ ][ ] buttons to choose an
option.
When choosing [N-up], press the [
][ ]
buttons to specify the number of images
per sheet.
Press the [
] button.
5
Print the image.
95
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Movie Printing Options
Single Prints the current scene as a still image.
Sequence
Prints a series of scenes, a certain interval apart, on a
single sheet of paper. You can also print the folder number,
le number, and elapsed time for the frame by setting
[Caption] to [On].
To cancel printing, press the [ ] button, choose [OK], and then
press the [
] button again.
[ID Photo] and [Sequence] cannot be chosen on Canon-brand
PictBridge-compatible printers from CP720/CP730 and earlier
models.
Adding Images to the Print List (DPOF)
Still Images
Movies
Batch printing (
=
97) and ordering prints from a photo development
service can be set up on the camera. Choose up to 998 images on a
memory card and congure relevant settings, such as the number of
copies, as follows. The printing information you prepare this way will
conform to DPOF (Digital Print Order Format) standards.
Conguring Print Settings
Still Images
Movies
Specify the printing format, whether to add the date or le number, and
other settings as follows. These settings apply to all images in the print
list.
Press the [
] button, and then
choose [Print Settings] on the [ ] tab.
Choose and congure items as desired
(
=
25).
3
Choose the printing area.
Follow step 2 in “Cropping Images before
Printing” (
=
93) to choose the printing
area.
4
Print the image.
Printing Movie Scenes
Still Images
Movies
1
Access the printing screen.
Follow steps 1 – 6 in “Easy Print”
(
=
92) to choose a movie. This screen
is displayed.
2
Choose a printing method.
Press the [ ][ ] buttons to choose [ ],
and then press the [ ][ ] buttons to
choose the printing method.
3
Print the image.
96
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Setting Up Printing for Individual Images
Still Images
Movies
1
Choose [Select Images & Qty.].
Press the [ ] button, choose
[Select Images & Qty.] on the [ ] tab,
and then press the [ ] button.
2
Choose an image.
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
You can now specify the number of
copies.
If you specify index printing for the
image, it is labeled with a [
] icon. To
cancel index printing for the image, press
the [ ] button again. [ ] is no longer
displayed.
3
Specify the number of prints.
Press the [ ][ ] buttons to specify the
number of prints (up to 99).
To set up printing for other images and
specify the number of prints, repeat steps
2 – 3.
Printing quantity cannot be specied for
index prints. You can only choose which
images to print, by following step 2.
When nished, press the [
] button
to return to the menu screen.
Print Type
Standard One image is printed per sheet.
Index
Smaller versions of multiple images are
printed per sheet.
Both
Both standard and index formats are
printed.
Date
On Images are printed with the shooting date.
Off
File No.
On Images are printed with the le number.
Off
Clear
DPOF data
On
All image print list settings are cleared
after printing.
Off
Not all of your DPOF settings may be applied in printing by the
printer or photo development service, in some cases.
[
] may be displayed on the camera to warn you that the
memory card has print settings that were congured on another
camera. Changing the print settings using this camera may
overwrite all previous settings.
Setting [Date] to [On] may cause some printers to print the date
twice.
Specifying [Index] will prevent you from choosing [On] for both
[Date] and [File No.] at the same time.
Index printing is not available on some Canon-brand PictBridge-
compatible printers (sold separately).
The date is printed in a format matching setting details in [Date/
Time] on the [
] tab (
=
17).
97
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Printing Images Added to the Print List (DPOF)
Still Images
Movies
When images have been added to the
print list (
=
95 –
=
97), this screen
is displayed after you connect the camera
to a PictBridge-compatible printer. Press
the [ ][ ] buttons to choose [Print now],
and then simply press the [ ] button to
print the images in the print list.
Any DPOF print job that you temporarily
stop will be resumed from the next image.
Adding Images to a Photobook
Still Images
Movies
Photobooks can be set up on the camera by choosing up to 998 images
on a memory card and importing them into the software on your computer,
where they are stored in their own folder. This is convenient when
ordering printed photobooks online or printing photobooks with your own
printer.
Choosing a Selection Method
Press the [ ] button, choose
[Photobook Set-up] on the [ ] tab, and
then choose how you will select images.
[ ] may be displayed on the camera to warn you that the
memory card has print settings that were congured on another
camera. Changing the print settings using this camera may
overwrite all previous settings.
Setting Up Printing for a Range of Images
Still Images
Movies
Following step 1 in “Setting Up Printing
for Individual Images” (
=
96), choose
[Select Range] and press the [ ] button.
Follow steps 2 – 3 in “Selecting a Range”
(
=
68) to specify images.
Press the [
][ ] buttons to choose
[Order], and then press the [ ] button.
Setting Up Printing for All Images
Still Images
Movies
Following step 1 in “Setting Up Printing
for Individual Images” (
=
96), choose
[Select All Images] and press the [ ]
button.
Press the [
][ ] buttons to choose [OK],
and then press the [ ] button.
Clearing All Images from the Print List
Following step 1 in “Setting Up Printing
for Individual Images” (
=
96), choose
[Clear All Selections] and press the [ ]
button.
Press the [
][ ] buttons to choose [OK],
and then press the [ ] button.
98
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Adding All Images to a Photobook
Still Images
Movies
Following the procedure in “Choosing
a Selection Method” (
=
97), choose
[Select All Images] and press the [ ]
button.
Press the [
][ ] buttons to choose [OK],
and then press the [ ] button.
Removing All Images from a Photobook
Still Images
Movies
Following the procedure in “Choosing
a Selection Method” (
=
97), choose
[Clear All Selections] and press the [ ]
button.
Press the [
][ ] buttons to choose [OK],
and then press the [ ] button.
After importing images to your computer, also refer to “Software
Instruction Manual” (
=
89) and the printer manual for further
information.
Adding Images Individually
Still Images
Movies
1
Choose [Select].
Following the procedure in “Choosing
a Selection Method” (
=
97), choose
[Select] and press the [ ] button.
2
Choose an image.
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
[
] is displayed.
To remove the image from the photobook,
press the [
] button again. [ ] is no
longer displayed.
Repeat this process to specify other
images.
When nished, press the [
] button
to return to the menu screen.
99
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Connection status of Eye-Fi cards in the camera can be checked on the
shooting screen (in regular information display mode) or playback screen
(in simple information display mode).
(Gray)
Not connected
(Blinking white)
Connecting
(White)
Connected
(Animated)
Transfer in progress*
1
Interrupted
Not communicating
Error acquiring Eye-Fi card information*
2
*1 Power saving (
=
23) on the camera is temporarily disabled during image
transfer.
*2 Restart the camera. Repeated display of this icon may indicate a problem with
the card.
Images labeled with a [ ] icon have been transferred.
Checking Connection Information
Check the access point SSID used by the Eye-Fi card or the connection
status, as needed.
Press the [
] button, choose [Eye-
Fi Settings] on the [ ] tab, and then
press the [ ] button.
Choose [Connection info], and then press
the [
] button.
The connection information screen is
displayed.
Using an Eye-Fi Card
Still Images
Movies
Before using an Eye-Fi card, always conrm that local use is permitted
(
=
2).
Inserting a prepared Eye-Fi card enables automatic wireless transfer of
images to a computer or uploading to a photo-sharing website.
Images are transferred by the Eye-Fi card. Refer to the card’s user
manual or contact the manufacturer for instructions on preparing and
using cards or resolving transfer problems.
When using an Eye-Fi card, keep the following points in mind.
- Cards may continue to transmit radio waves even when [Eye-
Fi trans.] is set to [Disable] (
=
100). Remove the Eye-Fi
card before entering hospitals, aircraft, or other areas where
transmission is prohibited.
- When troubleshooting image transfer issues, check the card
and computer settings. For details, refer to the card’s user
manual.
- Poor Eye-Fi connections may cause image transfer to take a
long time, and transfer may be interrupted in some cases.
- Eye-Fi cards may become hot, due to their transfer functions.
- Battery power will be consumed faster than in normal use.
- Camera operation may become sluggish. To resolve this, try
setting [Eye-Fi trans.] to [Disable].
100
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Disabling Eye-Fi Transfer
Congure the setting as follows to disable Eye-Fi transfer by the card, if
necessary.
Press the [
] button, choose [Eye-
Fi Settings] on the [ ] tab, and then
press the [ ] button.
Choose [Eye-Fi trans.], and then choose
[Disable].
[Eye-Fi Settings] is not shown unless an Eye-Fi card is in the
camera with its write-protect tab in the unlocked position. For this
reason, you cannot change settings for an inserted Eye-Fi card if
the write-protect tab is in the locked position.
101
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Troubleshooting
If you think there is a problem with the camera, rst check the following.
If the items below do not solve your problem, contact a Canon Customer
Support Help Desk.
Power
Nothing happens when the power button is pressed.
Conrm that the battery pack is charged (
=
15).
Conrm that the battery pack is inserted facing the correct way (
=
16).
Conrm that the memory card/battery cover is fully closed (
=
16).
Dirty battery terminals reduce battery performance. Try cleaning the terminals
with a cotton swab and reinserting the battery pack a few times.
The battery pack runs out of power quickly.
Battery performance decreases at low temperatures. Try warming the battery
pack a little by putting it in your pocket, for example, ensuring that the terminals
do not touch any metal objects.
Dirty battery terminals reduce battery performance. Try cleaning the terminals
with a cotton swab and reinserting the battery pack a few times.
If these measures do not help and the battery pack still runs out of power soon
after charging, it has reached the end of its life. Purchase a new battery pack.
The lens is not retracted.
Do not open the memory card/battery cover while the camera is on. Close the
cover, turn the camera on, and then turn it off again (
=
16).
The battery pack is swollen.
Battery swelling is normal and does not pose any safety concerns. However, if
battery swelling prevents the battery pack from tting in the camera, contact a
Canon Customer Support Help Desk.
Display on a TV
Camera images look distorted or not displayed on a TV (
=
87).
8
Appendix
Helpful information when using the camera
102
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
No AF frames are displayed and the camera does not focus when the
shutter button is pressed halfway.
To have AF frames displayed and the camera focus correctly, try composing the
shot with higher-contrast subject areas centered before you press the shutter
button halfway. Otherwise, try pressing the shutter button halfway repeatedly.
Subjects in shots look too dark.
Raise the ash and set the ash mode to [ ] (
=
58).
Adjust brightness by using exposure compensation (
=
50).
Adjust contrast by using i-Contrast (
=
52,
=
75).
Use AE lock or spot metering (
=
50,
=
51).
Subjects look too bright, highlights are washed-out.
Lower the ash and set the ash mode to [ ] (
=
28).
Adjust brightness by using exposure compensation (
=
50).
Use AE lock or spot metering (
=
50,
=
51).
Reduce the lighting on subjects.
Shots look too dark despite the ash ring (
=
30).
Shoot within ash range (
=
116).
Increase the ISO speed (
=
51).
Subjects in ash shots look too bright, highlights are washed-out.
Shoot within ash range (
=
116).
Lower the ash and set the ash mode to [
] (
=
28).
White dots or similar image artifacts appear in ash shots.
This is caused by light from the ash reecting off dust or airborne particles.
Shots look grainy.
Lower the ISO speed (
=
51).
Subjects are affected by red-eye (
=
37).
Set [Red-Eye Lamp] to [On] (
=
40) to activate the red-eye reduction lamp
(
=
3) in ash shots. Note that while the red-eye reduction lamp is on (for
about one second), it is not possible to shoot, because the lamp is counteracting
red-eye. For best results, have subjects look at the red-eye reduction lamp. Also
try increasing the lighting in indoor scenes and shooting at closer range.
Edit images using red-eye correction (
=
75).
Shooting
Cannot shoot.
In Playback mode (
=
61), press the shutter button halfway (
=
23).
Strange display on the screen under low light (
=
24).
Strange display on the screen when shooting.
Note that the following display problems are not recorded in still images but are
recorded in movies.
- The screen may darken under bright light.
- The screen may icker under uorescent or LED lighting.
- Purplish banding may appear on the screen if you compose a shot that
includes a bright light source.
No date stamp is added to images.
Congure the [Date Stamp ] setting (
=
17). Note that date stamps are not
added to images automatically, merely because you have congured the [Date/Time]
setting (
=
35).
Date stamps are not added in shooting modes (
=
110) in which this setting
cannot be congured (
=
35).
[ ] ashes on the screen when the shutter button is pressed, and shooting
is not possible (
=
30).
[
] is displayed when the shutter button is pressed halfway (
=
30).
Set [IS Mode] to [Continuous] (
=
60).
Raise the ash and set the ash mode to [
] (
=
58).
Increase the ISO speed (
=
51).
Mount the camera on a tripod or take other measures to keep it still. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other means to secure
the camera (
=
60).
Shots are out of focus.
Press the shutter button halfway to focus on subjects before pressing it all the
way down to shoot (
=
23).
Make sure subjects are within focusing range (
=
116).
Set [AF-assist Beam] to [On] (
=
40).
Conrm that unneeded functions such as macro are deactivated.
Try shooting with focus lock or AF lock (
=
55,
=
58).
103
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Sound is not played during movies.
Adjust the volume (
=
77) if you have activated [Mute] (
=
77) or the sound
in the movie is faint.
No sound is played for movies shot in [
] mode (
=
45) because audio is not
recorded in this mode.
Memory Card
The memory card is not recognized.
Restart the camera, with the memory card in it (
=
22).
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
- Press the [
] button to enter Playback mode. Hold the [ ] button
down as you press the [
] and [ ] buttons at the same time. On the next
screen, press the [
][ ] buttons to choose [B], and then press the [ ] button.
Eye-Fi Cards
Cannot transfer images (
=
99).
Recording to the memory card takes too long, or continuous shooting is
slower.
Use the camera to perform low-level formatting of the memory card (
=
81).
Shooting settings or FUNC. menu settings are not available.
Available setting items vary by shooting mode. Refer to “Functions Available in
Each Shooting Mode”, “FUNC. Menu”, and “Shooting Tab” (
=
107 –
=
110).
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
Use the camera to format the memory card, or switch to a card that supports
high-speed recording. Note that even if the elapsed time display is incorrect, the
length of movies on the memory card corresponds to the actual recording time
(
=
80,
=
116).
[ ] is displayed and shooting stops automatically.
The camera’s internal memory buffer lled up as the camera could not record to
the memory card quickly enough. Try one of the following measures.
- Use the camera to perform low-level formatting of the memory card (
=
81).
- Lower the image quality (
=
38).
- Switch to a memory card that supports high-speed recording (
=
116).
Zooming is not possible.
Zooming is not possible when shooting movies in [ ] mode (
=
45).
Playback
Playback is not possible.
Image or movie playback may not be possible if a computer is used to rename
les or alter the folder structure. Refer to “Software Instruction Manual” (
=
89)
for details on folder structure and le names.
Playback stops, or audio skips.
Switch to a memory card that you have performed low-level formatting on with the
camera (
=
81).
There may be brief interruptions when playing movies copied to memory cards
that have slow read speeds.
When movies are played on a computer, frames may be dropped and audio may
skip if computer performance is inadequate.
104
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Cannot magnify!/Cannot play back this content in Smart Shufe/Cannot
rotate/Cannot modify image/Cannot modify/Cannot assign to category/
Unselectable image.
The following functions may be unavailable for images that were renamed or already
edited on a computer, or images shot with another camera. Note that starred (*)
functions are not available for movies.
Magnify* (
=
65), Smart Shufe* (
=
66), Rotate* (
=
71), Favorites (
=
72),
Edit* (
=
73), Print List* (
=
95), and Photobook Set-up* (
=
97).
Invalid selection range
When specifying a range for image selection (
=
68,
=
70,
=
97), you
attempted to choose an initial image that was after the nal image, or vice-versa.
Exceeded selection limit
More than 998 images were selected for Print List (
=
95) or Photobook Set-up
(
=
97). Choose 998 images or less.
Print List (
=
95) or Photobook Set-up (
=
97) settings could not be saved
correctly. Reduce the number of selected images and try again.
You attempted to choose more than 500 images in Protect (
=
67), Erase (
=
69),
Favorites (
=
72), Print List (
=
95), or Photobook Set-up (
=
97).
Naming error!
The folder could not be created or images could not be recorded, because the
highest supported folder number (999) for storing images on the card has been
reached and the highest supported image number (9999) for images in folders
has been reached. On the [
] tab, change [File Numbering] to [Auto Reset]
(
=
81), or format the memory card (
=
80).
Lens Error
This error may occur if the lens is held while it is moving, or when the camera is
used in dusty or sandy locations.
Frequent display of this error message may indicate camera damage. In this
case, contact a Canon Customer Support Help Desk.
A camera error was detected (error number)
If this error message is displayed immediately after a shot, the image may not
have been saved. Switch to Playback mode to check for the image.
Frequent display of this error message may indicate camera damage. In this
case, write down the error number (Exx) and contact a Canon Customer Support
Help Desk.
File Error
Correct printing (
=
92) may not be possible for photos from other cameras or
images that have been altered using computer software, even if the camera is
connected to the printer.
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
The memory card may be inserted facing the wrong way. Reinsert the memory
card facing the correct way (
=
16).
Memory card locked
The write-protect tab of the memory card is set to the locked position. Switch the
write-protect tab to the unlocked position (
=
16).
Cannot record!
Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (
=
16).
Memory card error (
=
81)
If the same error message is displayed even after you have formatted a supported
memory card (
=
2) and have inserted it facing the correct way (
=
16),
contact a Canon Customer Support Help Desk.
Insufcient space on card
There is not enough free space on the memory card to shoot (
=
28,
=
42,
=
49) or edit images (
=
73). Either erase unneeded images (
=
69) or
insert a memory card with enough free space (
=
16).
Charge the battery (
=
15)
No Image.
The memory card does not contain any images that can be displayed.
Protected! (
=
67)
Unidentied Image/Incompatible JPEG/Image too large./Cannot play back
MOV/Cannot play back MP4
Unsupported or corrupt images cannot be displayed.
It may not be possible to display images that were edited or renamed on a
computer, or images shot with another camera.
105
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
On-Screen Information
Shooting (Information Display)
(
6
)
(
7
)
(
8
)
(
9
)(
10
) (
11
) (
12
) (
13
) (
14
) (
15
)
(
16
)
(
17
)
(
18
)
(
19
)
(
20
)
(
21
)
(
22
)
(
23
) (
24
) (
25
) (
26
) (
27
)
(
28
)
(
30
)
(
29
)
(
31
)
(
33
)
(
32
)
(
1
)
(
2
)
(
3
)
(
4
)
(
5
)
(1) Battery level (
=
106)
(2) White balance (
=
52)
(3) My Colors (
=
53)
(4) Drive mode (
=
35)
(5) Eco mode (
=
79)
(6) Self-timer (
=
33)
(7) Camera shake warning (
=
30)
(8) Metering method (
=
51)
(9) Eye-Fi connection status (
=
99)
(10) Still image compression (
=
59),
Resolution (
=
37)
(11) Recordable shots (
=
115)
(12) Movie quality (
=
38)
(13) Remaining time (
=
116)
(14)
Digital zoom magnification (
=
33),
Digital tele-converter (
=
55)
(15) Focusing range (
=
54,
=
55), AF lock (
=
58)
(16) Shooting mode (
=
107), Scene
icon (
=
31)
(17) Flash mode (
=
58)
(18) Red-eye correction (
=
37)
(19) AF frame (
=
55), Spot AE point
frame (
=
51)
(20) Date stamp (
=
35)
Print error
Check the paper size setting (
=
94). If this error message is displayed when
the setting is correct, restart the printer and complete the setting on the camera
again.
Ink absorber full
Contact a Canon Customer Support Help Desk to request assistance with ink
absorber replacement.
106
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Playback (Detailed Information Display)
(
1
)
(
2
)
(
3
)
(
4
)
(
5
)
(
6
)
(
7
)
(
8
) (
9
)(
10
) (
11
)
(
12
)
(
13
)
(
14
)
(
15
)
(
16
)
(
17
)
(
18
)
(
19
)
(
21
)(
22
) (
23
) (
24
) (
25
)(
20
)
(1) Movies (
=
28,
=
61)
(2) Shooting mode (
=
107)
(3) ISO speed (
=
51), Playback
speed (
=
45)
(4) Exposure compensation level
(
=
50)
(5) White balance (
=
52)
(6) Histogram (
=
63)
(7) Compression (image quality)
(
=
59) / Resolution (
=
37),
MOV (movies)
(8) Transferred via Eye-Fi (
=
99)
(9) Battery level (
=
106)
(10) Metering method (
=
51)
(11) Folder number - File number
(
=
81)
(12) Current image no. / Total no. of
images
(13) Shutter speed (still images), Image
quality / Frame rate (movies)
(
=
38)
(14) Aperture value
(15) Flash (
=
58)
(16) i-Contrast (
=
52,
=
75)
(17) Focusing range (
=
54,
=
55)
(18) File size
(19) Still images: Resolution (
=
115)
Movies: Playback time (
=
116)
(20) Image editing (
=
73)
(21) Protection (
=
67)
(22) Favorites (
=
72)
(23) My Colors (
=
53,
=
74)
(24)
Red-eye correction (
=
37,
=
75)
(25) Shooting date/time (
=
17)
(21) ISO speed (
=
51)
(22) i-Contrast (
=
52)
(23) Grid lines (
=
38)
(24) AE lock (
=
50), FE lock
(
=
59)
(25) Shutter speed
(26) Aperture value
(27) Exposure compensation level
(
=
50)
(28) Zoom bar (
=
28)
(29) IS mode icon (
=
32)
(30) Blink detection (
=
39)
(31) Time zone (
=
78)
(32) Image stabilization (
=
60)
(33)
Exposure compensation bar (
=
50)
Battery Level
An on-screen icon or message indicates the battery charge level.
Display Details
Sufcient charge
Slightly depleted, but sufcient
(Blinking red)
Nearly depleted—charge the battery
pack soon
[Charge the battery]
Depleted—charge the battery pack
immediately
107
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Functions and Menu Tables
Available or automatically set functions are indicated by black icons, such
as .
Unavailable functions are indicated by gray icons, such as .
Functions Available in Each Shooting Mode
Exposure Compensation (
=
50)
/ /
*
1
/ / / / / / / / / / / /
Self-Timer (
=
33)
/ / / / / / / / / / / / / /
/ /
/ / / / / / / / / / / / / /
Self-Timer Settings (
=
34)
/ / / / / / / / / / / / / /
Some information may not be displayed when viewing images on
a TV (
=
87).
Summary of Movie Control Panel
The following operations are available on the movie control panel
accessed as described in “Viewing” (
=
61).
Exit
Play
Slow Motion (Press the [ ][ ] buttons to adjust the playback
speed. No sound is played.)
Skip Backward* (To continue skipping backward, keep holding
down the [ ] button.)
Previous Frame (For fast-rewind, keep holding down the [ ]
button.)
Next Frame (For fast-forward, keep holding down the [ ] button.)
Skip Forward* (To continue skipping forward, keep holding down
the [ ] button.)
Edit (
=
76)
Shown when the camera is connected to a PictBridge-compatible
printer (
=
92).
* Displays the frame approx. 4 sec. before or after the current frame.
To skip forward or back during movie playback, press the [ ][ ]
buttons.
108
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Change Display (
=
24)
/ / / / / / / / / / / / / /
*1 Settings [Dark ‒ Light].
*2 Not available, but switches to [
] in some cases.
*3 FE lock not available in [
] ash mode.
FUNC. Menu
Metering Method (
=
51)
/ / / / / / / / / / / / / /
/
/ / / / / / / / / / / / / /
My Colors (
=
53)
/ / / / / / / / / / / / / /
/ / *
1
/ *
1
/ / / / / / / *
2
/ / / / / / / / / / / / / /
White Balance (
=
52)
/ / / / / / / / / / / / / /
/ / / / /
/ / / / / / / / / / / / / /
Flash (
=
58)
/ / / / / / / / / / / / / /
/ / / / / / / / / / / / / /
*
2
/ / / / / / / / / / / / / /
/ / / / / / / / / / / / / /
AE Lock/FE Lock (
=
50,
=
59)*
3
/ / / / / / / / / / / / / /
AF Lock (
=
58)
/ / / / / / / / / / / / / /
Focusing Range (
=
54,
=
55)
/ / / / / / / / / / / / / /
/
/ / / / / / / / / / / / / /
Tracking AF (
=
56)
/ / / / / / / / / / / / / /
109
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Resolution (
=
37)
/ / / / / / / / / / / / / /
/ /
/ / / / / / / / / / / / / /
/ / / / / / / / / / / / / /
Compression (
=
59)
/ / / / / / / / / / / / / /
/ / / / / / / / / / / / / /
Movie Quality (
=
38)
/
/ / / / / / /
*
3
/ / / / / / /
*1 White balance is not available.
*2 Set in a range of 1 – 5: contrast, sharpness, color saturation, red, green, blue,
and skin tone.
*3 Synchronizes with the aspect ratio setting and is automatically set (
=
45).
ISO Speed (
=
51)
/ / / / / / / / / / / / / /
/ / / /
/ / / / / / / / / / / / / /
Drive Mode (
=
35)
/ / / / / / / / / / / / / /
/ / / / / / / / / / / / / /
Still Image Aspect Ratio (
=
36)
/ / / / / / / / / / / / / /
/
/ / / / / / / / / / / / / /
/ / / / / / / / / / / / / /
110
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
AF-Point Zoom (
=
39)
On
/ / / / / / / / / / / / / /
Off
/ / / / / / / / / / / / / /
Servo AF (
=
57)
On
/ / / / / / / / / / / / / /
Off*
3
/ / / / / / / / / / / / / /
Continuous AF (
=
57)
On
/ / / / / / / / / / / / / /
Off
/ / / / / / / / / / / / / /
AF-assist Beam (
=
40)
On
/ / / / / / / / / / / / / /
Off
/ / / / / / / / / / / / / /
Shooting Tab
AF Frame (
=
55)
Face AiAF*
1
/ / / / / / / / / / / / / /
Tracking AF
/ / / / / / / / / / / / / /
Center
/ / / / / / / / / / / / / /
AF Frame Size (
=
55)*
2
Normal
/ / / / / / / / / / / / / /
Small
/ / / / / / / / / / / / / /
Digital Zoom (
=
33)
Standard
/ / / / / / / / / / / / / /
Off
/ / / / / / / / / / / / / /
1.6x/2.0x
/ / / / / / / / / / / / / /
111
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Blink Detection (
=
39)
On
/ / / / / / / / / / / / / /
Off
/ / / / / / / / / / / / / /
Grid Lines (
=
38)
On/Off
/ / / / / / / / / / / / / /
IS Settings (
=
60)
IS Mode
Continuous/Off
/ / / / / / / / / / / / / /
Shoot Only
/ / / / / / / / / / / / / /
Dynamic IS
1
/ / / / / / / / / / / / / /
2
/ / / / / / / / / / / / / /
Flash Settings (
=
37,
=
40)
Red-Eye Corr.
On
/ / / / / / / / / / / / / /
Off
/ / / / / / / / / / / / / /
Red-Eye Lamp
On/Off
/ / / / / / / / / / / / / /
i-Contrast (
=
52)
Auto
/ / / / / / / / / / / / / /
Off
/ / / / / / / / / / / / / /
Review image after shooting (
=
40)
Display Time
Off/Quick/2 sec./4 sec./8 sec./Hold
/ / / / / / / / / / / / / /
Display Info
Off/Detailed
/ / / / / / / / / / / / / /
112
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Set Up Tab
Item Ref. Page
Mute
=
77
Volume
=
77
Hints & Tips
=
78
Date/Time
=
17
Time Zone
=
78
Lens Retraction
=
79
Eco Mode
=
79
Power Saving
=
23,
=
79
LCD Brightness
=
80
Start-up Image
=
80
Format
=
80,
=
81
File Numbering
=
81
Create Folder
=
82
Video System
=
87
Eye-Fi Settings
=
99
Certication Logo Display
=
82
Language
=
18
Reset All
=
83
Date Stamp (
=
35)
Off
/ / / / / / / / / / / / / /
Date / Date & Time
/ / / / / / / / / / / / / /
*1 Operation when no faces are detected varies by shooting mode.
*2 Available when the AF frame is set to [Center].
*3 [On] when subject movement is detected in [
] mode.
113
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Print Tab
Item Ref. Page
Print
Select Images & Qty.
=
96
Select Range
=
97
Select All Images
=
97
Clear All Selections
=
97
Print Settings
=
95
Playback Mode FUNC. Menu
Item Ref. Page
Rotate
=
71
Protect
=
67
Favorites
=
72
Print
=
92
Play Movie
=
61
Smart Shufe
=
66
Image Search
=
64
Slideshow
=
65
Playback Tab
Item Ref. Page
Slideshow
=
65
Erase
=
69
Protect
=
67
Rotate
=
71
Favorites
=
72
Photobook Set-up
=
97
i-Contrast
=
75
Red-Eye Correction
=
75
Cropping
=
73
Resize
=
73
My Colors
=
74
Transition
=
61
Scroll Display
=
61
Auto Rotate
=
71
Resume
=
61
114
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Specications
Camera Specications
Camera Effective
Pixels (Max.)
Approx. 16 million pixels
Lens Focal
Length
30x zoom: 4.3 (W) – 129.0 (T) mm
(35mm lm equivalent: 24 (W) – 720 (T) mm)
LCD Monitor
3.0-type color TFT LCD
Effective Pixels: Approx. 230,000 dots
File Format
Design rule for Camera File system, DPOF (version
1.1) compliant
Data Type
Still Images: Exif 2.3 (JPEG)
Movies: MOV (Video: MPEG-4 AVC/H.264; Audio:
Linear PCM (monaural))
Interface
Hi-speed USB
Analog audio output (monaural)
Analog video output (NTSC/PAL)
Power Source
Battery Pack NB-11LH
AC Adapter Kit ACK-DC90
Dimensions
(Based on CIPA
Guidelines)
104.4 x 69.1 x 80.1 mm (4.11 x 2.72 x 3.15 in.)
Weight (Based on
CIPA Guidelines)
Approx. 313 g (approx. 11.04 oz.; including the
battery pack and memory card)
Approx. 297 g (approx. 10.48 oz.; camera body only)
Handling Precautions
The camera is a high-precision electronic device. Avoid dropping it or
subjecting it to strong impact.
Never bring the camera near magnets, motors, or other devices that
generate strong electromagnetic elds, which may cause malfunction
or erase image data.
If water droplets or dirt adheres to the camera or screen, wipe with
a dry soft cloth, such as an eyeglass cloth. Do not rub hard or apply
force.
Never use cleaners containing organic solvents to clean the camera
or screen.
Use a blower brush to remove dust from the lens. If cleaning is difcult,
contact a Canon Customer Support Help Desk.
To prevent condensation from forming on the camera after sudden
temperature changes (when the camera is transferred from cold to
warm environments), put the camera in an airtight, resealable plastic
bag and let it gradually adjust to the temperature before removing it
from the bag.
If condensation does form on the camera, stop using it immediately.
Continuing to use the camera in this state may damage it. Remove
the battery pack and memory card, and wait until the moisture has
evaporated before resuming use.
Before long-term battery storage, use up the battery pack’s remaining
charge, remove it from the camera, and store it in a plastic bag
or similar container. Storing a partially charged battery pack over
extended periods (about a year) may shorten its life or affect
performance.
115
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Number of Shots per Memory Card
The number of shots at an aspect ratio (
=
36) of 4:3 per memory card
is as follows. Note that the number of shots available varies by aspect
ratio.
Recording Pixels
Compression
Ratio
Number of Shots per Memory
Card (Approx. shots)
8 GB 32 GB
(Large)
16M/
4608x3456
1058 4272
1705 6883
(Medium 1)
8M/3264x2448
1996 8059
3069 12391
(Medium 2)
3M/2048x1536
4723 19064
8469 34184
(Small)
0.3M/640x480
27291 110150
40937 165225
The values in the table are based on Canon measurement conditions
and may change depending on the subject, memory card and camera
settings.
Digital Zoom Focal Length (35mm lm equivalent)
Digital Zoom [Standard]
24 – 2880 mm
(Represents the combined focal length
of optical and digital zoom.)
Digital Tele-Converter 1.6x 38.4 ‒ 1152.0 mm
Digital Tele-Converter 2.0x 48.0 – 1440.0 mm
Number of Shots/Recording Time, Playback Time
Number of Shots Approx. 190
Number of Shots (Eco Mode On) Approx. 260
Movie Recording Time*
1
Approx. 50 minutes
Movie Recording Time
(Continuous Shooting*
2
)
Approx. 1 hour 30 minutes
Playback Time Approx. 5 hours
*1 Time under default camera settings, when normal operations are performed,
such as shooting, pausing, turning the camera on and off, and zooming.
*2 Time available when shooting the maximum movie length (until recording stops
automatically) repeatedly.
The number of shots that can be taken is based on measurement
guidelines of the Camera & Imaging Products Association (CIPA).
Under some shooting conditions, the number of shots and recording
time may be less than mentioned above.
Number of shots/time with a fully charged battery pack.
116
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Shooting Range
Shooting
Mode
Focusing
Range
Maximum Wide Angle
( )
Maximum Telephoto
( )
0 cm (0.0 in.) – innity 1.4 m (4.6 ft.) – innity
Other
modes
5 cm (2.0 in.) – innity 1.4 m (4.6 ft.) – innity
*
0 – 50 cm
(0.0 in. – 1.6 ft.)
*
3 m (9.8 ft.) – innity 3 m (9.8 ft.) – innity
Not available in some shooting modes.
Continuous Shooting Speed
Shooting Mode Speed
Approx. 0.8 shots/sec.
Approx. 3.2 shots/sec.
Shutter Speed
[ ] mode,
automatically set
range
1 – 1/1600 sec.
Aperture
f/number f/3.4 – f/8.0 (W), f/5.8 – f/8.0 (T)
Recording Time per Memory Card
Image
Quality
Recording Time per Memory Card
8 GB 32 GB
1 hr. 11 min. 43 sec. 4 hr. 49 min. 46 sec.
3 hr. 24 min. 26 sec. 13 hr. 45 min. 52 sec.
The values in the table are based on Canon measurement conditions
and may change depending on the subject, memory card and camera
settings.
Recording will automatically stop when the clip le size reaches 4 GB,
or when the recording time reaches approximately 29 minutes and 59
seconds when shooting in [
], or approximately 1 hour when shooting
in [ ].
Recording may stop even if the maximum clip length has not been
reached on some memory cards. SD Speed Class 2 or higher memory
cards are recommended.
Flash Range
Maximum wide angle ( )
50 cm – 5.0 m (1.6 – 16 ft.)
Maximum telephoto (
)
1.4 – 3.0 m (4.6 – 9.8 ft.)
117
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Battery Pack NB-11LH
Type: Rechargeable lithium-ion battery
Nominal Voltage: 3.6 V DC
Nominal Capacity: 800 mAh
Charging Cycles: Approx. 300 times
Operating Temperatures: 0 – 40 °C (32 – 104 °F)
Dimensions: 34.6 x 40.1 x 5.2 mm
(1.36 x 1.58 x 0.20 in.)
Weight: Approx. 15 g (approx. 0.53 oz.)
Battery Charger CB-2LF/CB-2LFE
Rated Input: 100 – 240 V AC (50/60 Hz)
Rated Output: 4.2 V DC, 0.41 A
Charging Time: Approx. 2 hr. 20 min. (when using NB-11LH)
Charge Indicator: Charging: orange / Fully charged: green
(two-indicator system)
Operating Temperatures: 5 – 40 °C (41 – 104 °F)
118
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Index
A
AC adapter kit 85, 87
Accessories 85
AE lock 50
AF frames 55
AF lock 58
Aspect ratio 36
AUTO mode (shooting mode) 19, 28
AV cable 86, 87
B
Batteries
Date/time (date/time battery)
Power saving 23
Battery charger 2, 85
Battery pack
Charging 15
Eco mode 79
Level 106
Power saving 23
Black and white images 53
Blink detection 39
C
Camera
Reset all 83
CameraWindow (computer) 89
Center (AF frame mode) 55
Clock 27
Color (white balance) 52
Compression ratio (image quality) 59
Cropping 73, 93
Custom white balance 53
D
Date/time
Adding date stamps 35
Changing 17
Date/time battery 18
Settings 17
World clock 78
DC coupler 87
Defaults
Reset all
Digital tele-converter 55
Digital zoom 33
Display language 18
DPOF 95
E
Eco mode 79
Editing
Cropping 73
i-Contrast 75
My Colors 74
Red-eye correction 75
Resizing images 73
Erasing 69
Erasing all 70
Error messages 104
Exposure
AE lock 50
Compensation 50
FE lock 59
Eye-Fi cards 2, 99
F
Face AiAF (AF frame mode) 56
Face self-timer (shooting mode) 47
Favorites 72
FE lock 59
File numbering 81
Fireworks (shooting mode) 43
Fish-eye effect (shooting mode) 44
Flash
Off 59
On 58
Slow synchro 58
Focusing
AF frames 55
AF lock 58
AF-point zoom 39
Servo AF 57
Focusing range
Innity 55
Macro 54
Focus lock 55
FUNC. menu
Basic operations 24
Table 108, 113
G
Grid lines 38
H
Household power 87
I
i-Contrast 52, 75
Image quality
Compression ratio (image quality)
Images
Display period 40
Erasing 69
Playback
Viewing
Protecting 67
Image stabilization 60
Indicator 26
Innity (focusing range) 55
ISO speed 51
L
Lamp 40
Live View Control (shooting mode) 42
Long shutter (shooting mode) 47
Low light (shooting mode) 43
M
Macro (focusing range) 54
Magnied display 65
Memory cards 2
Recording time 116
Menu
Basic operations 25
Table 107
Metering method 51
Miniature effect (shooting mode) 45
Monochrome (shooting mode) 46
Movies
Editing 76
Image quality
(resolution/frame rate) 38
Recording time 116
My Colors 53, 74
P
P (shooting mode) 49
Package contents 2
Photobook set-up 97
PictBridge 86, 92
Playback
Viewing
119
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Portrait (shooting mode) 43
Poster effect
(shooting mode) 44
Power 85
AC adapter kit
Battery charger
Battery pack
Power saving 23
Printing 92
Program AE 49
Protecting 67
R
Red-eye correction 37, 75
Reset all 83
Resizing images 73
Resolution (image size) 37
Rotating 71
S
Saving images to a computer 90
Screen
Display language 18
Icons 105, 106
Menu
FUNC. menu
SD/SDHC/SDXC memory cards
Memory cards
Searching 64
Self-timer 33
2-second self-timer 34
Customizing the self-timer 34
Face self-timer
(shooting mode) 47
Sepia tone images 53
Servo AF 57
Shooting
Shooting information 105
Shooting date/time
Date/time
Slideshow 65
Smart Shufe 66
Snow (shooting mode) 43
Software
Installation 90
Saving images to a computer 90
Sounds 77
Strap 2, 14
Super vivid (shooting mode) 44
T
Terminal 87, 92
Toy camera effect
(shooting mode) 46
Tracking AF 56
Traveling with the camera 78
Troubleshooting 101
TV display 87
V
Viewing 20
Image search 64
Index display 63
Magnied display 65
Single-image display 20
Slideshow 65
Smart Shufe 66
TV display 87
W
White balance (color) 52
World clock 78
Wrist strap
Strap
Z
Zoom 19, 29, 33
120
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Trademarks and Licensing
Microsoft and Windows are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
Macintosh and Mac OS are trademarks of Apple Inc., registered in the
U.S. and other countries.
The SDXC logo is a trademark of SD-3C, LLC.
All other trademarks are the property of their respective owners.
This device incorporates exFAT technology licensed from Microsoft.
This product is licensed under AT&T patents for the MPEG-4 standard
and may be used for encoding MPEG-4 compliant video and/or
decoding MPEG-4 compliant video that was encoded only (1) for
a personal and non-commercial purpose or (2) by a video provider
licensed under the AT&T patents to provide MPEG-4 compliant
video. No license is granted or implied for any other use for MPEG-4
standard.
Disclaimer
Unauthorized reproduction of this guide is prohibited.
All measurements based on Canon testing standards.
Information subject to change without notice, as are product
specications and appearance.
Illustrations and screenshots in this guide may differ slightly from the
actual equipment.
The above items notwithstanding, Canon cannot be held liable for any
loss arising from the use of this product.
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

canon-powershot-sx400-is
  • wie funktioniert das herunterladen der Bilder auf den PC.
    Viele Grüße + Danke Eingereicht am 25-4-2020 16:58

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon PowerShot SX400 IS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Canon PowerShot SX400 IS

Canon PowerShot SX400 IS Bedienungsanleitung - Deutsch - 120 seiten

Canon PowerShot SX400 IS Kurzanleitung - Deutsch - 9 seiten

Canon PowerShot SX400 IS Bedienungsanleitung - Holländisch - 120 seiten

Canon PowerShot SX400 IS Kurzanleitung - Holländisch - 9 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info