Bedienungsanleitung Canon PowerShot SX412 IS (Seite 13 von 118) (Englisch)

580368

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode

Other Shooting Modes

Playback Mode

Setting Menu

Accessories

Appendix

Index

P Mode

● Unplug any battery charger used with the product when not in use. Do

not cover with a cloth or other objects when in use.

Leaving the unit plugged in for a long period of time may cause it to

overheat and distort, resulting in re.

● Do not leave any dedicated battery packs near pets.

Pets biting the battery pack could cause leakage, overheating, or

explosion, resulting in product damage or re.

● If your product uses multiple batteries, do not use batteries that

have different levels of charge together, and do not use old and

new batteries together. Do not insert the batteries with the + and –

terminals reversed.

This may cause the product to malfunction.

● Do not sit down with the camera in your pant pocket.

Doing so may cause malfunctions or damage the screen.

● When putting the camera in your bag, ensure that hard objects do not

come into contact with the screen. Also close the screen (so that it

faces the body), if your product’s screen closes.

● Do not attach any hard objects to the product.

Doing so may cause malfunctions or damage the screen.

● The slideshow transition effects may cause discomfort when viewed

for prolonged periods.

● When using optional lenses, lens lters, or lter adapters (if

applicable), be sure to attach these accessories rmly.

If the lens accessory becomes loose and falls off, it may crack, and the

shards of glass may lead to cuts.

● On products that raise and lower the ash automatically, make sure to

avoid pinching your ngers with the lowering ash.

This could result in injury.

Caution

Denotes the possibility of property damage.

● Do not aim the camera at intense light sources, such as the sun on a

clear day or an intense articial light source.

Doing so may damage the image sensor or other internal components.

● When using the camera on a sandy beach or at a windy location, be

careful not to allow dust or sand to enter the camera.

● On products that raise and lower the ash automatically, do not push

the ash down or pry it open.

This may cause the product to malfunction.

● Wipe off any dust, grime, or other foreign matter on the ash with a

cotton swab or cloth.

The heat emitted from the ash may cause foreign matter to smoke or the

product to malfunction.

● Remove and store the battery pack/batteries when you are not using

the product.

Any battery leakage that occurs may cause product damage.

● Before you discard the battery pack/batteries, cover the terminals with

tape or other insulators.

Contacting other metal materials may lead to re or explosions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon PowerShot SX412 IS Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon PowerShot SX412 IS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info