Bedienungsanleitung Canon PowerShot SX430 IS (Seite 79 von 146) (Englisch)

733850

Zoom out

Zoom in

Vorherige Seite

1/146

Nächste Seite

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode

Other Shooting Modes

Playback Mode

P Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

Connecting via NFC When Camera Is in Playback

Mode

● Press the [ ] button to turn the camera

on.

● Touch the smartphone with Camera

Connect installed (

77) against the

camera’s N-Mark ( ).

● Press the [

][ ][ ][ ] buttons to choose

an image to send, and then press the [ ]

button. [ ] is displayed.

● To cancel selection, press the [

] button

again. [ ] is no longer displayed.

● Repeat this process to choose additional

images.

● Afteryounishchoosingimages,press

the [

] button.

● Press the [

][ ] buttons to choose [OK],

and then press the [ ] button.

● Press the [

][ ][ ][ ] buttons to choose

[Send], and then press the [ ] button.

● The images are now sent.

● Ifduringconnectionamessageonthecamerarequestsyouto

enter the nickname, follow step 2 in “Sending Images to an NFC-

Compatible Smartphone” (

77) to enter it.

● The camera does not keep a record of smartphones you connect

to via NFC in Playback mode.

● You can preset images to transfer at your desired size (

94).

● When using NFC, keep the following points in mind.

- Avoid strong impact between the camera and smartphone.

This may damage the devices.

- Depending on the smartphone, the devices may not recognize

each other immediately. In this case, try holding the devices

togetherinslightlydierentpositions.Ifconnectionisnot

established, keep the devices together until the camera screen

is updated.

- Ifyouattemptconnectionwhenthecameraiso,amessage

may be displayed on the smartphone reminding you to turn on

the camera. If so, turn the camera on and touch the devices

together again.

- Do not place other objects between the camera and

smartphone. Also, note that camera or smartphone covers or

similar accessories may block communication.

● All images in the camera can be viewed from the connected

smartphone when you choose [Yes] in step 3. To keep camera

images private, so that they cannot be viewed from the

smartphone, choose [No] in step 3.

● Once you have registered a smartphone, you can change privacy

settings for it on the camera (

101).

● Connectionsrequirethatamemorycardbeinthecamera.

● You can also change the camera nickname on the screen in

step 2 (

78).

● You can also send multiple images at once and change the image

size before sending (

94).

● You can send the current image by choosing [Send this image] on

the screen in step 4.

● To disable NFC connections, choose MENU (

26) > [ ] tab

>[Wirelesssettings]>[Wi-FiSettings]>[NFC]>[O].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon PowerShot SX430 IS Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon PowerShot SX430 IS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info