Bedienungsanleitung Canon PowerShot V10 (Seite 20 von 303) (Englisch)

809391

Zoom out

Zoom in

Vorherige Seite

1/303

Nächste Seite

Handling Precautions

Camera care

This camera is a precision instrument. Do not drop it or subject it to physical shock.

The camera is not waterproof and cannot be used underwater. If the camera gets wet,

contact a Canon Service Center immediately. Wipe off any water droplets with a clean,

dry cloth, and if the camera is exposed to salty air, wipe it off with a clean, well-wrung

wet cloth.

Never leave the camera near anything having a strong magnetic field such as a magnet

or electric motor. Also, avoid using or leaving the camera near anything emitting strong

radio waves, such as a large antenna. Strong magnetic fields can cause camera

malfunction or destroy image data.

Do not leave the camera in excessive heat, such as in a car in direct sunlight. High

temperatures can cause the camera to malfunction.

The camera contains precision electronic circuitry. Never attempt to disassemble the

camera yourself.

If the camera is suddenly brought in from the cold into a warm room, condensation may

form on the camera and internal parts. To prevent condensation, first put the camera in

a sealed plastic bag and let it adjust to the warmer temperature before taking it out of

the bag.

If condensation forms on the camera, to avoid damage, do not use the camera or

remove the card. Turn the camera off and wait until the moisture has fully evaporated

before resuming use. Even after the camera is completely dry, if it is still internally cold,

do not remove the card until the camera has adjusted to the ambient temperature.

Condensation may form inside the camera lens if you record 4K movies in [Smooth

skin movie] mode in humid environments. Keep the camera off until the moisture has

evaporated before resuming use. If the condensation does not dissipate, try changing

the recording mode or setting the camera to an option other than 4K movies.

If the camera will not be used for an extended period, store it in a cool, dry, well-

ventilated location. Record occasionally during storage to make sure the camera is still

working correctly.

Avoid storing the camera where there are chemicals that result in rust and corrosion

such as in a chemical lab.

If the camera has not been used for an extended period, test all its functions before

using it. If you have not used the camera for some time or if there is an important shoot

such as a foreign trip coming up, have the camera checked by your nearest Canon

Service Center or check the camera yourself and make sure it is working properly.

The camera may become hot after repeated continuous shooting or still photo/movie

shooting over an extended period. This is not a malfunction.

If there is a bright light source inside or outside the image area, ghosting may occur.

When shooting with backlighting, keep the sun sufficiently away from the angle of view.

Always keep intense light sources such as the sun, lasers, and other intense artificial

light sources out of the image area and not near it. Concentrated intense light may

cause smoke or damage the image sensor or other internal components.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon PowerShot V10 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon PowerShot V10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info