500666
63
Zoom out
Zoom in
Vorherige Seite
1/154
Nächste Seite
63
Selecting Screen Aspect and Aspect
Projecting an Image
Selecting Aspect Ratio
Select the aspect ratio of projecting image based on the input signal type, aspect ratio of
the screen and resolution.
For more details on the aspect ratios, refer to "When Projecting an Image from a Com-
puter" on page 135.
Types of Aspect Ratios
Auto
An image is projected at an aspect ratio of the input signal. Select this mode for normal
image projection.
4:3
An image is projected at an aspect ratio of 4:3. Select this if an image of 4:3 aspect ratio
cannot be appropriately projected in the [AUTO] mode.
16:9
An image is projected at an aspect ratio of 16:9. Select this if an image of 16:9 aspect
ratio cannot be appropriately projected in the [AUTO] mode.
Zoom
An image with 4:3 aspect ratio is projected in the center of the screen enlarged in 16:9
aspect ratio with the upper and lower portion of the image cut off. Select this when pro-
jecting visual software having aspect ratio of 4:3 and black belts at the top and bottom of
the image.
This mode is available when you select [16:9] or [16:9 D. image shift] for [Screen
aspect] and select [HDMI (576p, 480p) (SX80)], [COMPONENT (576p, 480p, 576i,
480i)], [VIDEO] or [S-VIDEO (SX80)] for input signal.
True size
An image is projected with the original resolution of the input signal. Select this to clearly
project computer screen images having a resolution SXGA+ or lower (VGA, SVGA, XGA
or SXGA) or visual software having a resolution lower than 1035i.
This mode is available when you select [HDMI (720p, 576p, 480p) (SX80)] or [COMPO-
NENT (720p, 576p, 480p)] for input signal.
[Auto] is not available if the input signal type is [VIDEO].
[Auto] is automatically selected if the input signal type is [USB]. (SX80)
It is not available for an image having a resolution higher than SXGA+ or visual software
having a resolution of 1080i, 1080p, 1035i, 576i or 480i.
It is also available if the input signal is [ANALOG PC-1], [ANALOG PC-2], or [DIGITAL PC
(SX80)]; however, it may not be available depending on the screen aspect setting.
63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon realis sx800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info