Bedienungsanleitung Canon SELPHY CP-720 (Seite 42 von 51) (Englisch)

584754

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

Getting Ready Printing AppendicesOverview

Troubleshooting Tasks and Index

NextBack

Return to Cover Page

Handling Precautions

This section explains the precautions that you should take in

handling the equipment.

• Do not apply excessive force to the paper cassette.

Force or impact on the cassette may result in paper jams or equipment

damage.

• Do not switch the power on/off repeatedly when you do not intend

to print.

The printer initialization process consumes ink and the equivalent of several

pages could be wasted.

• Be careful not to spray the equipment with insecticides or volatile

substances. In addition, do not store the equipment in contact with

rubber or vinyl products for long periods of time.

These materials may cause deformation of the printer’s casing.

• Do not handle the ink cassettes with wet or sweaty hands.

• Do not touch the springs of the paper cassette. If the springs are bent

or deformed, paper will not feed correctly into the printer.

• Do not place any foreign objects in the print output receptacle (on the

top of the paper cassette).

• Do not touch the print side of the paper with your fingers.

Always hold the paper along the edges (outside the perforated border).

Be sure that hands are dry before touching the paper. Sharp objects will

scratch the paper surface. Keep the paper surface free from fingerprints,

dust, water droplets, etc.

• Use a soluble ink pen to write on the paper sheets.

• Please avoid the following actions as they may result in color change,

color fading or color bleeding.

•Stickinganytypeofadhesivetapeontotheprintsurface.

• Allowingprintsurfacestocomeintocontactwithvinylmaterials.

• Applyingalcoholorothervolatilesolventstotheprintsurface.

•Leavingprintsurfacestightlypressedagainstanyothersurfacesorobjects

forprolongedperiods.

• Keep the battery terminals clean at all times.

Dirty terminals result in a poor connection. Before recharging or using the

battery, polish the terminals with a slender, soft tipped cotton swab.

• Do not carry or store the battery pack with metal objects with sharp

edges, such as paper clips and pins. Always put the terminal cover on

the battery pack’s terminal when carrying it or before storing it.

• Although the battery pack’s maximum operating range is 5 to 40 °C

(41 to 104 °F), the optimal range is 10 to 30 °C (50 to 86 °F).

Battery performance will temporarily drop in cold environments, such as ski

hills.

• If the battery status is low, the finished print may not be ejected into

the print output receptacle completely.

If that occurs, replace the battery with a fully charged one or use the AC

adapter.

Devices

Spring

Battery (CP730 Only)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon SELPHY CP-720 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info