Bedienungsanleitung Canon Speedlite420EX (Seite 49 von 56) (Englisch)

16414

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Type .......................................Direct-contact, shoe-mount flash with E-TTL/TTL autoflash.

(AF-assist beam, autozoom head, bounce flash, and wireless slave setting

provided.)

Compatible cameras ..............Type-A EOS cameras (E-TTL autoflash). (→ page 2)

Type-B cameras (TTL autoflash). (→ page 2)

Flash coverage and Guide No.

...See page 50.

Recycling time and flash count

...See page 11 and 50.

Flash duration ........................1.2 ms or less with normal flash.

Flash coverage.......................Autozoom head is positioned automatically to suit the lens focal length

(24mm, 28mm, 35mm, 50mm, 70mm, and 105mm).

Flash modes...........................(1) Normal sync

(2) High-speed sync (FP flash)

(3) Test firing

(4) Modeling flash (at 70 Hz for 1 sec.)

Bounce angles .......................See page 40.

Exposure control modes: .......(1) E-TTL autoflash (with Type-A cameras and preflash evaluative metering)

(2) FE lock (with Type-A cameras and preflash evaluative metering)

(3) TTL autoflash (with Type-B cameras and off-the-film flash metering)

Flash exposure compensation

....(1) Automatic flash output reduction for fill flash.

(2) Enabled with cameras having a flash exposure compensation feature.

Flash range ............................(1) With normal sync: 0.7 - 24.2 meters

(with 50mm f/1.4 lens at ISO 100)

(2) With high-speed sync: 0.7 - 12.7 meters (at 1/180 sec.)

Sync speed ............................See page 52.

Flash-ready indication............Red pilot lamp.

Flash exposure confirmation..Yellow-green lamp.

AF-assist beam range............

Covers 1, 3, 5, or 7 focusing points (covers only a part of the 45-point Area AF).

Range at center Approx. 0.7 - 7 m,

Range at periphery Approx. 0.7 - 5 m (in total darkness).

Wireless slave setting ............Slave setting Wireless selector set to SLAVE.

Channels 4

Slave group ID A, B, C

Reception angle Approx. +/-40° horizontal, +/-30° vertical

Flash coverage Set to 24mm automatically.

Flash-ready indicator AF-assist beam emitter blinks.

Exposure control Automatic with the master unit (for E-TTL autoflash).

Test flash Enabled with master unit's test firing button.

SE mode ................................Power turns off automatically after 90 sec. of non-use.

Power turns on with test firing button.

Power source: ........................(1) Four size-AA alkaline batteries

(2) Four size-AA nickel-hydride batteries

* Four size-AA lithium batteries

Dimensions (mm)...................71.5 (W) x 123 (H) x 99.4 (D) mm

2.8 (W) x 4.82 (H) x 3.89 (D) in

Weight....................................300 g /10.6 oz (excluding batteries)

• The above specifications are based on Canon's testing standards.

• Specifications and the external appearance are subject to change without notice.

Major Specifications

K133 (E) 02.4.1 3:05 PM Page 49

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Speedlite420EX Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon Speedlite420EX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info