Bedienungsanleitung Canon VB-H43 (Seite 54 von 193) (Englisch)

683288

Zoom out

Zoom in

Vorherige Seite

1/193

Nächste Seite

Camera Name

[Camera Name]

Be sure to enter [Camera Name (alphanumeric

characters)].

Up to 15 ASCII characters (spaces and printable

characters) may be used for [Camera Name

(alphanumeric characters)].

Note

• The camera name set here will be shown when the camera is

registered for use with RM Viewer.

Initial Camera Settings

(1) [AE Mode], [Slow Shutter], [Shutter Speed]

Set the exposure control and shutter speed for the

camera startup.

[AE Mode]

[Auto]

The exposure is controlled automatically.

[Auto (Flickerless)]

In this mode, image flickers caused by fluorescent

lights, etc., can be reduced. The shutter speed is

automatically adjusted according to the brightness

of the environment in which the camera is used.

[Auto (Shutter-priority AE)]

In this mode, a desired shutter speed can be

specified.

[Slow Shutter]

Slow shutter can be used only if [Auto] or [Auto

(Flickerless)] is selected in [AE Mode].

Set the maximum slow shutter time to be used when

in auto exposure mode when capturing video in a

dark place. Select [Disable], [1/15], [1/8], [1/4] or

[1/2]. As slower shutter speed generates residual

images when capturing a moving subject, select an

appropriate time according to the capture conditions.

[Shutter Speed]

Shutter speed can be used only if [Auto (Shutter-priority

AE)] is selected in [AE Mode].

Select a desired shutter speed from the 16 levels from

[1/2] to [1/16000]. When capturing a moving subject,

selecting a higher shutter speed can reduce blurry image

capture.

(2) [Exposure Compensation]

The exposure compensation when the camera starts

can be set in the range of [-4 (Dark)] to [4 (Bright)]. To

brighten the image, set a positive value. To darken the

image, set a negative value.

The setting is not available if [Smart Shade Control] is

set to [Auto].

(3) [Metering Mode]

Set the metering mode when the camera starts.

[Center-Weighted]

The entire screen is metered by focusing on the

center of the screen.

Even when slightly darker/brighter areas are present

on the periphery of the screen, an appropriate

exposure can be achieved for the subject near the

center.

Use this mode if the subject is positioned near the

center of the screen.

[Camera] Setting Initial Camera Settings and External Device Name

The following can be set here.

• Camera Name

Enter the name of the camera. The camera name

is required for use with RM-Lite.

•Initial Camera Settings

Sets shooting settings at camera start up.

• Camera Control

Set the digital zoom, image stabilizer, AGC limit,

smart shade control strength, and pan/tilt speed

control.

• Day/Night

Set the day/night switching mode.

• Installation Conditions

Sets installation conditions, such as LED settings.

• Camera Position Control

Set whether or not to limit the pan, tilt and zoom

operations to the preset positions. Also, set the

camera position when nobody has control

privileges.

• External Device Name

Set the external input device name and external

output device name.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon VB-H43 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon VB-H43

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info