Bedienungsanleitung Canon VB-H43 (Seite 72 von 193) (Englisch)

683288

Zoom out

Zoom in

Vorherige Seite

1/193

Nächste Seite

(1) [Timer Event]

Select [Disable] or [Enable] for timer event.

(2) [Start Time]

Set the start time of the timer event in 24-hour format.

(3) [End Time]

Set the end time of the timer event in the 24-hour

format.

(4) [Repeat Interval]

Select [1 sec.] [5 sec.] [10 sec.] [30 sec.] [1 min.]

[5 min.] [10 min.] [15 min.] [20 min.] [30 min.] [1 hour]

[3 hours] [6 hours] or [12 hours] for the timer event

repeat intervals. Select [None] if an operation need

not be repeated.

(5) [Video Record]

Specify the video record action. When [Enable] is

selected, video will be transmitted to the destination

selected in [Video Record Action] (p. 69) when a timer

event occurs.

(6) [E-mail Notification]

Select the e-mail notification operation to be

performed. If [Enable] is selected, e-mail notification

is performed when a timer event occurs. To use this

function, [Upload] > [E-mail Notification] must also be

set (p. 66).

(7) [External Device Output]

Select whether external device output (1 or 2) is active

or inactive when a timer event occurs. Select [Disable]

to disable output to an external device.

(8) [Day/Night Mode Switching]

Select the Day/Night Mode switching behavior when a

timer event is triggered.

Select [Switch to Day Mode] to switch to Day Mode at

the start time, and Night Mode at the end time.

Select [Switch to Night Mode] to switch to Night Mode

at the start time, and Day Mode at the end time.

Select [Disable] to disable Day/Night Mode switching.

Note

When using timers that run continuously for 24 hours with a

[Repeat Interval] of 30 seconds or less, set the timer start and

end times so the timers can run continuously.

Example:

Sound Clip Upload

(1) [Browse File]

Specify the audio file you want to register as the

sound clip, and then

click

[Add].

(2) [Sound Clip Name]

Set a name for the audio file to be registered as sound

playback (up to 15 alphanumeric characters). If a

blank field is applied, the sound clip will be deleted.

To delete a registered audio file, click [Delete] next to

the sound clip name you want to delete.

Note

Audio files must be 20 seconds or shorter and must be “.wav”

files (µ-law PCM 8 bits sampling frequency 8000 Hz, monaural).

Audio file samples are provided in the SOUND folder on the

Setup CD-ROM.

Important

• [Day/Night Mode Switching] can only be set in [Timer 1].

• [External Device Output] and [Day/Night Mode Switching] do

not support [Repeat Interval].

• When [Day/Night] in the Admin Viewer is set to [Auto], Day/

Night Mode switching will not happen when a timer event is

triggered (p. 153).

• If the [Day/Night Mode Switching] settings switch Day/Night

Mode while the Admin Viewer/VB Viewer is assigned camera

control, control will be released.

Timer [Start Time] [End Time] [Repeat Interval]

[Timer 1] 0:00 12:00 10 sec

[Timer 2] 12:00 0:00 10 sec

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon VB-H43 Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon VB-H43

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info