Bedienungsanleitung Canon VB-H610VE (Seite 56 von 178) (Englisch)

683281

Zoom out

Zoom in

Vorherige Seite

1/178

Nächste Seite

On-screen display

(1) [Date display]

Select whether to enable date display over images. If

[Enable] is selected, date information will be

displayed over images.

(2) [Position of date display]

Select [Upper left], [Upper right], [Lower left] or

[Lower right] for the position of date display

information.

(3) [Format of date display]

Select [YYYY/MM/DD], [DD/MM/YYYY] or [MM/DD/

YYYY] for the format of the date display.

(4) [Time display]

Select whether to enable time display over images. If

[Enable] is selected, display time information will be

displayed over images.

(5) [Position of time display]

Select [Upper left], [Upper right], [Lower left] or

[Lower right] for the position of time display

information.

(6) [Text display]

Select [Display nothing], [Display designated string]

or [Display camera name] for the text string to display

over images.

If [Display designated string] is selected, the [Text

string display] set in (8) will be displayed.

If [Display camera name] is selected, the text string

set in [Camera Name (alphanumeric characters)]

under [Camera] will be shown (p. 51).

(7) [Position of text display]

Select the position of text display from [Upper left],

[Upper right], [Lower left] or [Lower right].

(8) [Text string display]

If [Display designated string] is selected in (6) [Text

display], you can enter a text string of up to 15 ASCII

characters (spaces and printable characters) for

superimposed display on the video.

(9) [Color of text]

Select [Black], [Blue], [Cyan], [Green], [Yellow],

[Red], [Magenta] or [White] for the color of text to be

displayed over the image.

(10)[Color of text outline]

Select [Black], [Blue], [Cyan], [Green], [Yellow],

[Red], [Magenta] or [White] for the color of text

outline.

(11)[Color depth of text and outline]

Select [Fill text and outline], [Make text only

transparent], [Make text only translucent] or [Make

text and outline translucent] for the color depth of text

and outline to be displayed over the image.

Note

• The on-screen time display may not correspond with camera

time by several seconds (p. 50).

• Depending on video quality settings, on-screen display may

become difficult to decipher. Set after confirming appearance

on actual images.

• The on-screen display is not shown for cropped

images using digital PTZ with horizontal size of 384 pixels or

lower.

• Block noise may become noticeable if a large video size and

low target bit rate are set.

• The data size may increase depending on the type or

movement of the subject. If the frame rate remains low or

other undesirable conditions continue for a prolonged

period, lower the video size or quality setting.

• Note that if you are using included RM-Lite, the hard disk

usage will also be affected during recording.

Important

The on-screen time display is not suitable for usage where high

reliability is required. Use as reference information only where

utmost and constant reliability is required for surveillance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon VB-H610VE Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon VB-H610VE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info