Bedienungsanleitung Canon VB-H730F (Seite 57 von 193) (Englisch)

683291

Zoom out

Zoom in

Vorherige Seite

1/193

Nächste Seite

[Camera] Setting Initial Camera Settings and External Device Name

Setting Page

When [Haze Compensation] is set to [Auto] and [Haze

Compensation Strength (Auto)] is set to [Strong],

contrast may be strong if the subject is not obscured

by haze. If this happens, set [Haze Compensation

Strength (Auto)] to [Mild].

(6) [Pan/Tilt Speed Control]

Select [Control at set speed] or [Control by zoom

position] for the pan/tilt control mode. If [Control by

zoom position] is selected, the pan/tilt speed will be

slower in the telephoto zoom range, and faster in

wide-angle zoom range.

Note

• [Pan/Tilt Speed Control] can also be set using [Pan/Tilt] in the

Control for Admin panel of the Admin Viewer (p. 150).

• If [Control by zoom position] is selected, [Control for Admin] >

[Pan/Tilt] will also be fixed at [Control speed by zoom position].

Day/Night (when Auto is set)

(1) [Switching Brightness]

Set the brightness at which Day Mode and Night

Mode will be switched when [Auto] is selected in

[Day/Night]. Select [Darker], [Slightly Darker],

[Standard], [Slightly Brighter] or [Brighter]. Select

[Darker] if you want to capture video in color as much

as possible.

Select [Brighter] to reduce noise. Note that this mode

switches to black & white sooner.

(2) [Response (sec.)]

Set the time in seconds needed for judgment on

switching between Day Mode and Night Mode when

[Auto] is selected in [Day/Night]. Select [60], [30],

[20], [10] or [5].

The mode will switch between Day Mode and Night

Mode if brightness remains above or below the level

set in (1) for the number of seconds specified.

Select [30] or [60] if brightness changes frequently,

such as when a light source passes in front of the

camera. Select [5] or [10] if change in brightness is

minimal.

Installation Conditions

(1) [Dome]

Select whether or not a dome is used. To use the

camera with a dome housing unit, select [Use].

(2) [LED Setting]

Select [Turn Off] or [Turn On] for the LED operation

status on the camera. Set to [Turn Off] if you do not

want to turn on the LED.

Set to [Turn Off] if an optional indoor dome housing for

the camera is used, if reflected LED light enters the

capture area or otherwise interferes with image

capture, or if you do not want to show that the camera

is operating.

(3) [Image Flip]

Select [Disable] or [Enable] for the orientation of the

camera video.

Note

• For the focus ranges when the dome is set to

[Use], see the note on p. 56.

• The LED will light for several

seconds when booting even if the [LED Setting] is set to [Turn

Off].

Camera Position Control

(1) [Restricted to Presets]

Set the camera control preset to [No Restriction] or

[Preset Only]. The administrator can limit camera

control by non-administrators to preset angles by

selecting [Preset Only].

(2) [Camera Position without Control]

Select either [Do not return to Home Position] or

[Return to Home Position] as the action when no

control privileges are requested by users and the

home position has already been set.

When [Return to Home Position] is selected and no

users have control privileges, the camera moves

automatically to the home position. This function

requires the home position of the camera be set in

advance. Set the home position using Preset Setting

Tool (p. 104).

Important

• [AGC Limit] is disabled when [Exposure] is set to [Manual] or

[Auto (Flickerless)] in the Admin Viewer.

• Minimum subject illumination may change when [AGC Limit]

is set.

• If [On2] is selected for [Image Stabilizer], it is best to select a

video size smaller than “960 x 540”.

• The image stabilizer is not effective when the subject is shaking.

• The image stabilizer is not effective beyond a certain level of

vibration or against momentary vibration.

• See “Important” on p. 95, p. 102, p. 108 for precautionary

notes regarding Admin Tools configuration when image

stabilizer is set.

• See “Important” on p. 148 for precautionary notes regarding

the Viewer when image stabilizer is set.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon VB-H730F Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info