Bedienungsanleitung Canon VB-H730F (Seite 60 von 193) (Englisch)

683291

Zoom out

Zoom in

Vorherige Seite

1/193

Nächste Seite

H.264(1)

Configure settings using H.264(1) when using H.264

video for upload or memory card recording. H.264(2)

video cannot be used for upload or memory card

recording.

H.264(1) video can be displayed using Admin Viewer and

RM-Lite Viewer. It cannot be displayed using VB Viewer.

(1) [Video Size]

Select the size of the transmitted video. The video

sizes that can be selected depend on the [Video Size

Set] setting.

(2) [Bit Rate Control]

Select [Do not use bit rate control] or [Use bit rate

control].

Select [Use bit rate control] when [Video Format]

under [Upload] is set to [H.264(1)] or when [Video

Format] under [Memory Card] is set to [H.264(1)].

(3) [Target Bit Rate (kbps)]

If [Use bit rate control] is selected in (2), select a

desired target bit rate from the 17 levels from [64] to

[16384].

(4) [Video Quality]

If [Do not use bit rate control] is selected in (2), select

a desired quality from 1 to 5 (total 5 levels) for H.264

video transmission.

Greater values have higher quality.

(5) [Frame Rate (fps)]

Select [30], [15], [10], [6], [5], [3], [2] or [1] (fps) for

the frame rate of video transmitted.

(6) [I Frame Interval (sec)]

Select [0.5], [1], [1.5], [2], [3], [4] or [5] for the I frame

interval (sec) for H.264 video.

H.264(2)

(1) [H.264(2)]

Select [Enable] to distribute H.264 video using two

streams.

H.264(2) video can be displayed using Admin Viewer

and RM-Lite Viewer. It cannot be used for upload,

memory card recording, or by VB Viewer.

Refer to the settings for “H.264(1)” for details about

[Video Size], [Bit Rate Control], [Target Bit Rate

(kbps)], [Video Quality], [Frame Rate (fps)], and [I

Frame Interval (sec)] settings.

On-screen display

Important

• When streaming two H.264 videos, setting the video size

settings for H.264(1) and H.264(2) to the following

combinations restricts the frame rate to a maximum of 15 fps.

For all other combinations, a frame rate of up to 30 fps can

be selected.

• When [H.264(1)] is selected for the memory card recording

and upload settings, the following restrictions apply to the

[H.264(1)] setting.

- Only [Use bit rate control] can be selected for [Bit Rate

Control].

- Only [3072] or less can be selected for [Target Bit Rate

(kbps)].

- Only one of [0.5], [1], and [1.5] can be selected for [I

Frame Interval (sec)].

• Network load will increase if a larger video size is set or

higher video quality and target bit rate are set, as this

increases data size per frame. As a result, the following could

occur:

JPEG: The frame rate may drop

H.264: Video may be temporarily disrupted

• Block noise may become noticeable if a large video size and

low target bit rate are set.

• The data size may increase depending on the type or

movement of the subject. If the frame rate remains low or

other undesirable conditions continue for a prolonged

period, lower the video size or quality setting.

• The included RM-Lite cannot record H.264 video.

• H.264 video can be displayed using Admin Viewer and RM-

Lite Viewer. H.264 video cannot be displayed using VB

Viewer.

H.264(1) H.264(2)

1920 x 1080 All sizes

All sizes 1920 x 1080

1280 x 960 1280 x 960

1280 x 720 1280

X 720

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon VB-H730F Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info