Bedienungsanleitung Canon VB-H730F (Seite 118 von 193) (Englisch)

683291

118

Zoom out

Zoom in

Vorherige Seite

1/193

Nächste Seite

118

 Setting Event Operations ([Event] tab)

Set operations to be performed upon detection of

changes in a subject.

[Event] tab

(1) Specify the operation timing. (Multiple checkboxes can

be selected.)

[ON Event Operation] checkbox

When selected, the operations set in (2) [E-mail

Notification] and [Video Record] are performed the

moment detected mode is triggered to ON.

[OFF Event Operation] checkbox

When selected, the operations set in (2) [E-mail

Notification] and [Video Record] are performed the

moment detected mode is triggered to OFF.

[Detected mode Operation] checkbox

When selected, the operations set in (2) [E-mail

Notification] and [Video Record] are performed for as

long as detected mode is active.

(2) Specify the event operation. (Multiple checkboxes can

be selected.)

[E-mail Notification] checkbox

When selected, e-mail notification is performed at the

timing set in (1).

[E-mail Notification] must be set in

advance under [Upload] in the Setting page

(p. 66).

[Video Record] checkbox

When selected, video record is performed at the

timing set in (1). [Video Record Action] must be set in

advance under [Event] in the Setting page (p. 69).

(3) Specify the audio playback timing.

[Audio Playback at ON Event] checkbox

When selected, the sound set in (4) [Sound Clip

Name] is played at the moment the detected mode is

triggered to ON.

[Audio Playback at OFF Event] checkbox

When selected, the sound set in (4) [Sound Clip

Name] is played at the moment the detected mode is

turned OFF.

(4) Set the playback sound.

[Sound Clip Name]

Select the sound that is to be played. The sound clip

name set for [Sound Clip Upload] under [Event] in the

Setting page is shown in the pull-down list (p. 72).

[Volume]

Set the audio playback volume in the range of 1 to

100.

(5) Operation of External Device Output

[External Device Output for ON Event] checkbox

Select this checkbox for enabling external device

output at an ON event and select output destination

(output 1 or 2) and operation (active or inactive).

[External Device Output for OFF Event] checkbox

Select this checkbox for enabling external device

output at an OFF event and select output destination

(output 1 or 2) and operation (active or inactive).

 Setting Detection Areas

Set detection areas in the video display area.

Setting a [Rectangular] detection area

By default, a rectangle is shown in the video display area.

Move or resize that rectangle to set a detection area.

Setting a [Polygonal] detection area

Specify polygonal areas with a maximum of 32 angles.

Click in the video display area to form the polygon point

by point. Click on a previously set point to complete the

polygon and set the enclosed area as the detection area.

The set area can also be moved by dragging it.

(1)

(3)

(4)

(5)

(2)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon VB-H730F Seite 118

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info