Bedienungsanleitung Canon VB-M42 (Seite 154 von 193) (Englisch)

683292

154

Zoom out

Zoom in

Vorherige Seite

1/193

Nächste Seite

154

[Infrared (940nm)]

Select this option to capture video under infrared

(940 nm wavelength) lighting.

(8) [None]

When switching Day/Night Mode, the camera

automatically focuses on each of the fluorescent

lighting focus positions set for Day Mode and Night

Mode.

Registering the Focus Positions

The focus positions that are used when switching Day/

Night Mode are registered as follows:

[Registered] will appear next to the mode, [Day Mode]

or [Night Mode], picked in step 1.

[Clear the registered focus position?] will appear when

selecting (5) or (8), even if only one focus position has

been registered for either [Day Mode] or [Night Mode].

When switching to (5) or (8), and then back to [Move to

registered focus position] mode, selecting [No] will

preserve the registered focus position. Selecting [Yes] will

clear the registered focus position.

Note

Refer to the following for focus ranges when Day/Night is

enabled.

Notes on p. 56

Notes on p. 40

 Selecting the External Device Output

You can control external device output and display the

current output status using an icon. Output can be

activated and deactivated by clicking this icon.

Example:

Output 1: inactive

Output 2: active

 Registering Custom Settings

By registering settings for camera position, exposure,

white balance, etc. beforehand, you can load settings

using manual or automatic control.

In custom settings, the setting values for the following

items in the Control for Admin menu can be saved.

[Smart Shade Control], [Haze Compensation], [Focus],

[Exposure], [White Balance], [Image Quality Adjustment],

[Day/Night]

[Pan/Tilt/Zoom]

Click [Register] after completing the above settings to

(1) Custom setting button

Select the numbered button with the registered

custom settings to load the settings.

(2) [Register Custom Settings]

The [Register Custom Settings] panel is displayed.

Select (2) [Day Mode] or (3) [Night Mode] in [Day/

Night] (p. 153).

Under the lighting conditions selected in step 1, adjust

the focus position as required while watching the

video.

Click [Register focus position].

Select the remaining mode in step 1, and repeat steps

2-3.

Important

• If the viewer is exited in [Day Mode] or [Night Mode], auto

day/night stays disabled even if [Auto] is set in the setting

page. To set auto day/night to enable, be sure to exit the

viewer after setting [Auto].

• While making settings with the [Day/Night Mode Focus

Settings] panel, it is not possible to make settings using

Admin Tools on another computer.

• If [Use One-shot AF] is activated due to switching between

Day/Night Mode, the camera may not be able to focus on a

target subject using One-shot AF if another subject passes in

front of the target at that time.

• If Night Mode will be used under infrared lighting, turn on the

lighting before switching to Night Mode.

• Even if you use [Day/Night Mode Focus Settings], focus may

not be maintained in Night Mode if the light source changes

(ex. infrared lighting to sunlight).

(1)

(2)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon VB-M42 Seite 154

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon VB-M42

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info