Bedienungsanleitung Canon VB-S30D (Seite 61 von 185) (Englisch)

630614

Zoom out

Zoom in

Vorherige Seite

1/185

Nächste Seite

[Event] Setting Video Record, Volume Detection, External Device Output/Input and Timer

Setting Page

(8) [Ongoing ON Event Operation]

Select the operation to be performed while a volume

detection event is in progress. This can be set when

[ON Event Operation] is set to [Enable].

If [Enable] is selected, (10) [Video Record] and

(11) [E-mail Notification] will be executed according to

their settings during the volume detection event.

(9) [Preset]

If a preset is specified, the camera will orient

automatically to the specified preset position when a

volume detection event occurs. To use presets, it is

necessary to set the presets with the Preset Setting

Tool under Admin Tools (p. 96). If there is no need for

additional camera operation, select [None].

(10)[Video Record]

Specify the video record action. If [Enable] is

selected, video will be transmitted to the destination

selected in [Video Record Action] (p. 60) when a

volume detection event occurs.

(11)[E-mail Notification]

Select the e-mail notification operation to be

performed. If [Enable] is selected, e-mail notification

is performed when a volume detection event occurs.

To use this function, [Upload] > [E-mail Notification]

must also be set (p. 57).

(12)[External Device Output for ON Event]

Select whether external device output is active or

inactive upon an ON event. Select [Disable] to disable

external device output.

(13)[External Device Output for OFF Event]

Select whether external device output is active or

inactive upon an OFF event. Select [Disable] to

disable external device output.

External Device Output

(1) [Operation Mode]

Select the normal (inactive) circuit condition.

When [Normally Open] is selected, the output

terminals remain in the open state during normal

operation, and the terminals close upon an active

event and open upon an inactive event.

When [Normally Close] is selected, the output

terminals remain in the closed state during normal

operation, and the terminals open upon an active

event and close upon an inactive event.

(2) [Active Output Format]

Select [Pulse] or [Continuous] for the external device

output format.

(3) [Pulse Output Time (sec)]

Enter the pulse output time in the range of 1 to 120

(sec.). This setting is available when [Active Output

Format] is [Pulse].

Note

[Normally Open] means that the contacts are normally in the

open state (that the circuit is non-conductive), and [Normally

Close] means that the contacts are normally in the closed state

(that the circuit is conductive).

External Device Input

(1) [External Device Input Event]

Set external device input events to [Disable] or

[Enable].

(2) [Operation Mode]

Select the circuit condition of the connected external

device.

When [Normally Open] is selected, an active event

occurs when the terminals of the external device

close, and an inactive event occurs when the

terminals open.

When [Normally Close] is selected, an active event

occurs when the terminals of the external device

Important

• For notes on use of volume detection, see “Safety

Precautions” in “Precautions for Use of Built-In Camera

Functions and Included Software” (p. 7).

• When Admin Viewer/VB Viewer has camera control

privileges, those camera control privileges are released if the

camera is moved to a preset position, specified in the

[Preset] settings (VB-S30D/VB-S31D only), by a volume

detection event operation.

Important

When [Active Output Format] is set to [Pulse] and a timer is

used, a single contact output is controlled when the timer starts.

Normally Open

Active Event

Inactive Event

1 (Terminals close)

0 (Terminals open)

Normally Close

Inactive Event

Active Event

1 (Terminals close)

0 (Terminals open)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon VB-S30D Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon VB-S30D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info