Bedienungsanleitung Canon VB-S30D (Seite 154 von 185) (Englisch)

630614

154

Zoom out

Zoom in

Vorherige Seite

1/185

Nächste Seite

154

Before contacting the dealer where you purchased the product or Canon's Customer Service Center, check the items

specified as follows. If a log message is displayed, check the details of the message and corresponding countermeasure in

the log message list.

Note

For details on troubleshooting for Camera Management Tool, please refer to the "Camera Management Tool User Manual".

Troubleshooting

Problem Countermeasures

The camera does not start. • Check if the LAN cable is connected correctly.

• Turn the camera off and on again (see “Installation Guide” > “Connecting the

Camera”).

The top page of the camera is not displayed. • Check if the LAN cable is connected correctly.

• Check if the network to which the camera is connected is set up correctly. In

particular, check if the IP address, subnet mask and default gateway address are set

within the ranges supported by the applicable network.

• If you have changed the IP address, the new address will not become effective until

the camera is rebooted.

• Check if the correct URI (camera IP address) is entered in your web browser (p. 28,

p. 76, p. 128).

• Check whether the connection is from a computer whose access is blocked in

[Access Control] on the Setting page.

• Check the authentication method, [User Name], [Password], combination of

certificates, and network rules for connection in [802.1X] on the Setting page with the

system administrator.

The Admin Tools will not start.

The Admin Viewer will not start.

• “Your web browser is not supported.” If this message is displayed, use Internet

Explorer 8 or greater.

• “Application could not be started. Install .NET Framework x.x (x is the version).” If this

message is displayed, install the corresponding version of .NET Framework or enable

settings (p. 18).

• “JavaScript is not available or disabled on your web browser.” If this message is

displayed, set [Active Script] to [Enable] in Internet Explorer's security settings. (See

(3) below for instructions on how to set this.)

• “The settings from (1) to (3) below must be carried out to use the Admin Viewer and

Admin Tools.” If this message is displayed, set the following.

(1) Install the Admin Tools Certificate with the installer (p. 26).

(2) When using Internet Explorer 9 or greater, follow the steps in “Registering the

IP address of the Camera as a Trusted Site” (p. 19) and add this web site to

[Trusted sites] in Internet Explorer's security settings.

(3) In Internet Explorer click [Tools] > [Internet Options] > [Security] > [Custom

level] and under the Security Settings list, set [XAML browser applications],

[File download] and [Launching programs and files in an IFRAME] to [Enable].

Video is not displayed. • To improve video quality, refer to “[Video] Setting Video Size, Quality and Frame Rate”

in “Chapter 3 Setting Page” (p. 50) to change settings and make adjustments.

• Up to 30 viewers can access the camera at the same time. If this limit has been

exceeded, video is not displayed and a message appears.

• When you are using Internet Explorer 10 or 11 in a 64-bit operating system and the

camera is registered as a trusted site and protected mode is enabled, reception and

playback of H.264 video may be disabled. If this occurs, disable protected mode.

There is no audio. • If there is no audio, check the audio server settings of the camera and also check the

sound and audio device settings for the computer.

• If you are using the Admin Viewer with the administrator authorities, check if the

camera is connected to the RM Viewer or another viewer that lets the administrator

use audio.

• In VB Viewer, audio cannot be used if the Canon Network Camera Audio Receiver

add-on is not installed.

• When you are using Internet Explorer 10 or 11 in a 64-bit operating system and the

camera is registered as a trusted site and protected mode is enabled, reception and

playback of audio may be disabled. If this occurs, disable protected mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon VB-S30D Seite 154

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon VB-S30D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info