Bedienungsanleitung Canon VB-S31D (Seite 49 von 185) (Englisch)

630615

Zoom out

Zoom in

Vorherige Seite

1/185

Nächste Seite

[Camera] Setting Initial Camera Settings and External Device Name

Setting Page

(4) [Haze Compensation Strength (Auto)]

Select [Mild], [Medium], or [Strong] for the haze

compensation strength when [Haze Compensation]

(p. 47) is set to [Auto].

When [Haze Compensation] is set to [Auto] and [Haze

Compensation Strength (Auto)] is set to [Strong],

contrast may be strong if the subject is not obscured

by haze. If this happens, set [Haze Compensation

Strength (Auto)] to [Mild].

(5) [Pan/Tilt Speed Control]

Select [Control at set speed] or [Control by zoom

position] for the pan/tilt control mode.

If [Control by zoom position] is selected, the pan/tilt

speed will be slower in the telephoto zoom range, and

faster in wide-angle zoom range.

Note

• [Pan/Tilt Speed Control] can also be set in [Control for Admin]

> [Pan/Tilt] (p. 141).

• If [Control by zoom position] is selected, [Control for Admin] >

[Pan/Tilt] will also be fixed at [Control speed by zoom position].

Day/Night (when Auto is set)

(1) [Switching Brightness]

Set the brightness at which Day Mode and Night

Mode will be switched when [Auto] is selected in

[Day/Night]. Select [Darker], [Slightly Darker],

[Standard], [Slightly Brighter] or [Brighter]. Select

[Darker] if you want to capture video in color as much

as possible.

Select [Brighter] to reduce noise. Note that this mode

switches to black & white sooner.

(2) [Response (sec.)]

Set the time in seconds needed for judgment on

switching between Day Mode and Night Mode when

[Auto] is selected in [Day/Night]. Select [60], [30],

[20], [10] or [5].

The mode will switch between Day Mode and Night

Mode if brightness remains above or below the level

set in (1) for the number of seconds specified.

Select [30] or [60] if brightness changes frequently,

such as when a light source passes in front of the

camera. Select [5] or [10] if change in brightness is

minimal.

Installation Conditions

(1) [LED Setting]

Select [Turn Off] or [Turn On] for the LED operation

status on the camera. Set to [Turn Off] if you do not

want to turn on the LED.

(2) [Image Flip]

Select [Disable] or [Enable] for the orientation of the

camera video.

Note

The LED will light for several seconds when booting even if the

[LED Setting] is set to [Turn Off].

Camera Position Control

(1) [Restricted to Presets]

Set the camera control preset to [No Restriction] or

[Preset Only]. The administrator can limit camera

control by non-administrators to preset angles by

selecting [Preset Only].

(2) [Camera Position without Control]

Select either [Do not return to Home Position] or

[Return to Home Position] as the action when no

control privileges are requested by users and the

home position has already been set.

When [Return to Home Position] is selected and no

users have control privileges, the camera moves

automatically to the home position. This function

requires the home position of the camera be set in

advance. Set the home position using Preset Setting

Tool (p. 96).

External Input Device / External Output Device

[Device Name] for external input device/external output

device

Be sure to enter each device name in order to identify

the corresponding external device being connected.

Enter [Device Name (alphanumeric characters)] using

up to 15 characters (ASCII characters (space or

printable characters) excluding the double quotation

mark (“)).

Note

The external device name set here will be shown when the Admin

Viewer or included RM-Lite is used.

Important

• [AGC Limit] is disabled when [Exposure] is set to [Manual],

[Auto (Flickerless)], or [Auto (Flickerless 2)] in the Admin

Viewer.

• Minimum subject illumination may change when [AGC Limit]

is set.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon VB-S31D Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon VB-S31D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info