630615
142
Zoom out
Zoom in
Vorherige Seite
1/185
Nächste Seite
142
Setting the Smart Shade Control
The smart shade control function differs from backlight
compensation in that only dark areas are brightened while
bright areas are kept intact.
(1) [Smart Shade Control]
Select [Auto], [Manual], or [Disable].
(2) Adjusting the Smart Shade Control
When smart shade control is [Manual], set one of the 7
levels from [1] (Mild) to [7] (Strong).
Example: If the background is bright and the subject
is hard to see, this function brightens dark areas to
make the subject clearer.
In comparison to backlight compensation, smart
shade control can reduce overexposure of bright
areas.
Note
When [Auto] or [Manual] is selected for smart shade control,
the video data size increases.
When [Manual] is selected for smart shade control, setting a
high compensation strength may increase screen noise. If
noise is noticeable, lower the control level.
Setting the Haze Compensation
If the subject is obscured by haze, this adjusts contrast in
the video to improve subject visibility.
(1) [Haze Compensation]
[Auto]
Automatically uses Compensation Removal.
[Manual]
Use buttons in (2) to manually set the compensation
strength.
[Disable]
Disables Haze Compensation.
(2) Haze Compensation Strength
When Haze Compensation is [Manual], set one of the
7 levels from [1] (Mild) to [7] (Strong).
Note
When [Auto] or [Manual] is selected for [Haze Compensation],
the video data size increases.
When using [Haze Compensation], contrast may be strong if
the subject is not obscured by haze. If this happens, set [Haze
Compensation] to [Manual] and set a lower Haze
Compensation strength.
Setting the Focus
[Auto] : Automatically focuses on the
subject.
[Manual] : You can adjust the focus manually
by pushing the (far) and
(near) buttons.
Clicking [One-shot AF] will use
autofocus to focus on a subject and
then stop in manual focus.
[Fixed at Infinity] : You can set the focus so that it is
fixed near infinity.
Important
[Auto] cannot be selected for [Smart Shade Control] if
[Exposure] is set to [Manual].
If you set [Haze Compensation] to [Auto] or [Manual], [Smart
Shade Control] is set to [Disable].
(1)
(2)
OFF Smart Shade
Control
BLC (Back Light
Compensation)
Important
If you set [Smart Shade Control] to [Auto] or [Manual], [Haze
Compensation] is set to [Disable].
(1)
(2)
142

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon VB-S31D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Canon VB-S31D

Canon VB-S31D Bedienungsanleitung - Deutsch - 185 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info