Bedienungsanleitung Canon WUX6010 (Seite 17 von 200) (Englisch)

630620

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

For Safe Use

Pay attention to the following points when carrying or transporting the projector.

• This projector is a precision instrument. Do not knock it over or subject it to

impacts. Doing so may cause a malfunction.

• Do not reuse any packaging or shock-absorbent materials that were

supplied with the projector at the time of purchase for transporting or

shipping the projector. Protection of the projector cannot be guaranteed if

used packaging or shock-absorbent materials are reused. Fragments from

shock-absorbent material may also enter the interior of the projector which

could cause a malfunction.

• Removal and installation of the lens unit should not be performed by the

user. Be sure to have the procedure performed by a qualified technician or

contact the Canon Customer Support Center.

• Disconnect the cables connected to the projector. Carrying the projector

while the cables are attached may cause an accident.

• Retract the adjustable feet before moving the projector. Leaving the feet

extended may cause damage.

Pay attention to the following points when installing or using the projector.

• Do not touch the lens with bare hands. Doing so may result in deterioration

of image quality.

• If the projector is abruptly taken from a cool to a warm location,

condensation may form on the lens or mirrors, which may cause a blurred

image. Wait until the condensation has evaporated for the image projected

to return to normal.

• Do not install the projector in a location where the temperature is high or low.

Doing so may cause a malfunction. For guidelines on operating

temperatures, see “Product Specifications”.

• Do not place any objects on top of the projector that may change shape or

color due to heat.

• Projector settings must be adjusted when using the projector at high

altitudes or in upward or downward projection. Failure to adjust the settings

may shorten the lamp life or damage the lamp. For details, contact the

Canon Customer Support Center.

• Do not install the projector near high-voltage electrical power lines or an

electrical power source.

• Do not use the projector on a soft surface such as carpet or sponge mat, etc.

Doing so could cause heat to build up inside the projector and this could

result in a malfunction.

• Do not block the air intake or exhaust vents of the cooling fan. If the air

intake or exhaust vent is blocked, heat cannot be released from inside the

projector, which may shorten the useful life of the lamp or cause malfunction.

• Installing the projector in the wrong direction may cause a malfunction or

accident. Do not install the projector with one side raised, or with the

projector tilted toward the left or right.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon WUX6010 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon WUX6010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info