Bedienungsanleitung Canon XA55 (Seite 38 von 144) (Englisch)

709267

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

Recording Video and Photos

To record video

4Press the REC button to begin recording.

• During recording, Ü (in red) will appear on the screen. Additionally, if the handle unit is attached to the

camcorder, the tally lamp will illuminate.

• You can also press the REC button on the handle unit or the START/STOP button on the supplied wireless

controller.

5Press the REC button again to stop recording.

• Ü will change to Ñ (in white) and the clip will be recorded on the card selected for recording clips. The tally

lamp will also go out.

To take photos

4 During record standby mode, touch [PHOTO].

• By default, the [ Photo] function is assigned to the onscreen assignable button, but you can change

the assigned function if necessary (A 94).

• A green g icon will appear at the bottom of the screen. Also, at the upper right of the screen, {Ð will

appear with the icon of the card selected for recording photos.

• You can also press the PHOTO button on the supplied wireless controller.

When you have finished recording

1 Set the lens barrier switch to CLOSED to close the lens barrier.

2 Make sure that the ACCESS indicator is off.

3 Set the power switch to OFF.

4 Close the LCD panel and return the viewfinder to its retracted position.

IMPORTANT

• Be sure to save your recordings regularly (A 113), especially after making important recordings. Canon shall

not be liable for any loss or corruption of data.

NOTES

• The REC button on the handle unit has a lock lever to prevent accidental operation. Set the lock lever to C in

cases such as when you do not want a recording inadvertently paused or do not plan to use this REC button.

Return the lever to its previous position to enable use of the REC button again.

• The maximum continuous recording time of a single clip is 6 hours. After that, a new clip will be created

automatically and recording will continue as a separate clip.

• When recording in bright places, it may be difficult to use the LCD screen. In such case, use the viewfinder or

adjust the brightness of the screen (A 22).

• A video recording will be saved as separate clips in the following cases:

- When the camcorder switches to the other SD card while recording video due to the relay recording function

(A 34).

- When recording clips on an SDHC card, the video (stream) file in the clip will be split approximately every

4 GB. Playback with the camcorder will be continuous.

After saving the separate split clips to a computer, you can use MP4 Join Tool to join the files and save them

as a single clip (A 113).

• Recording photos:

- Photos are recorded as JPG files. Photos can be recorded only in record standby mode.

- Photos cannot be recorded when pre-recording is activated.

• When you need to record for a long time with the camcorder set on a tripod, you can close the LCD panel and

use only the viewfinder in order to save power when using a battery pack (A 22).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon XA55 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon XA55

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info