Bedienungsanleitung Canon XA55 (Seite 120 von 144) (Englisch)

709267

120

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

Menu Options

120

[£ Display Setup] menu

[Monitor Channels] [ƒ CH1/CH2], [š CH1/CH1], [Ÿ CH2/CH2], [ CH1+2/CH1+2],

[ CH3/CH4], [ CH3/CH3], [ CH4/CH4], [ CH3+4/CH3+4],

[ CH1+3/CH2+4]

(A 110)

[HDMI Channels] [ƒ CH1/CH2], [ CH3/CH4] (A 111)

[Notification Sounds] [ High Volume], [ Low Volume], [j Off]

A beep will accompany some of the camcorder's operations.

• While pre-recording is activated, the camcorder will not emit any notification sounds.

Menu item Setting options and additional information

u [Output Terminal] [ø SDI], [ù HDMI] (A 107, 108)

[HDMI Max Resolution] [3840x2160]*, [1920x1080], [1280x720(50.00P)] (A 108)

* Available only in mode.

u [SDI Output] [1920x1080], [1280x720(50.00P)] (A 107)

u [3G-SDI Mapping] [ Level A], [ Level B] (A 107)

u [SDI/HDMI Scan Mode]

v [HDMI Scan Mode]

[ P], [ PsF (Forced 1080i)] (A 109)

[Output Status] —

Displays a screen where you can check the configuration (video and audio) of the output signal.

[LCD Brightness] Brightness adjustment bar, [ ] (darker), [ ] (brighter)

• Changing the brightness of the screen does not affect the brightness of your recordings or the

brightness of the playback image on a TV.

[LCD Backlight] [ Bright], [ Normal], [ Dim]

[Viewfinder Backlight] [ Bright], [ Normal]

Changes the screen’s backlight level to one of three levels (LCD screen) or two levels (viewfinder),

affecting the general brightness of the screen.

• Changing the brightness of the screen does not affect the brightness of your recordings or the

brightness of the playback image on a TV.

[LCD Mirror Image] [i On], [j Off]

When this setting is set to [i On], this function reverses the image on the screen horizontally

when you rotate the LCD panel 180 degrees toward the subject. In other words, the screen will show

a mirror image of the subject.

• If the camcorder is operated (touch screen, physical buttons and switches, or remote operation)

while the mirror image is displayed, the normal image will be displayed temporarily. After about

4 seconds, the mirror image is displayed again.

[Output Onscreen Displays] [i On], [j Off]

When this setting is set to [i On], the camcorder’s onscreen displays will appear also on the

screen of a TV or monitor connected to the camcorder.

[Onscreen Markers] [j Off], [4 Level (Gray)], [3 Level (White)], [6 Grid (Gray)],

[5 Grid (White)]

You can display a grid or a horizontal line at the center of the screen. Use the markers as a reference

to make sure your subject is framed correctly (vertically and/or horizontally).

• Using the onscreen markers will not affect the recordings.

[Distance Units] [. meters], [/ feet]

Selects the units to use for the focusing distance display while focusing manually. This setting also

affects units for the altitude in the GPS information of geotagged recordings.

Menu item Setting options and additional information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon XA55 Seite 120

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon XA55

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info