215651
140
Zoom out
Zoom in
Vorherige Seite
1/168
Nächste Seite
Troubleshooting
140
A digital camera or USB flash memory is not recognized. (SX80 II)
You cannot hear sound.
Cause Countermeasure
The external monitor output is not
set on the notebook computer cor-
rectly.
Turn on the external monitor output on the notebook com-
puter. To turn on the external monitor output, press the [LCD]
or [VGA] function key or a key with an icon for the external
monitor, while holding down the [Fn] key on the keyboard of
the notebook computer. (P51)
The combination of keys used to perform this operation varies
among computer manufacturers.
For more detailed informa-
tion, refer to the User's Manual that came with your com-
puter.
The displayed image is not the
same as that displayed on the
computer.
Check whether the dual screen (multi-display) mode is
selected on the computer. If the dual screen mode has been
selected, change it to the simultaneous display mode on the
computer.
The output setting method varies among computer manufac-
turers. For more detailed information, refer to the User's Man-
ual that came with your computer.
The lens cap is not removed. Remove the lens cap.
Cause Countermeasure
PictBridge is not supported. Equipment not supporting PictBridge is not recognized.
Refer to the User's Manual for the relevant equipment.
(P114)
The mass storage class is not sup-
ported.
USB flash memory not supporting the mass storage class is
not recognized. Refer to the User's Manual for USB flash
memory. (P118)
Cause Countermeasure
The audio cable is not connected
correctly.
Check the cable connection of the audio cable. (P38, P39)
The MUTE function is enabled. Press the MUTE button on the remote control. (P71)
The volume level is adjusted to the
minimum.
Press the VOL button on the remote control or the VOL+ but-
ton on the top control to adjust the volume level. (P71)
An audio cable with a built-in resis-
tor is used.
Use an audio cable without a built-in resistor.
140

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon xeed sx800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Canon xeed sx800

Canon xeed sx800 Bedienungsanleitung - Deutsch - 154 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info