Bedienungsanleitung Canon XF200 (Seite 173 von 246) (Englisch)

615742

173

Zoom out

Zoom in

Vorherige Seite

1/246

Nächste Seite

173

Connecting to a Wi-Fi Network

The camcorder is Wi-Fi certified and can connect to a Wi-Fi network using an external access

point (wireless router) or can itself serve as a Wi-Fi access point. The camcorder can connect to

wireless routers (access points) compliant with the 802.11a*/b/g/n protocol and are Wi-Fi certified

(bear the logo shown on the right).

The camcorder offers 5 ways to connect to a Wi-Fi network and the method you use will depend on the type and

specifications of the access point and network you want to use. Note that using an unprotected Wi-Fi network

can expose your data to monitoring by unauthorized third parties. Be aware of the risks involved.

* The 802.11a protocol is not available for camcorders whose identification label contains the camcorder ID “ID0041” and the text

“2.4 GHz only” (A 240).

WPS (button): If your wireless router supports Wi-Fi Protected Setup (WPS), setup will be

easy and require minimal configuring and no passwords. To check if your wireless router

has a WPS button and for details about how to activate the Wi-Fi protected setup, refer to

the instruction manual of your wireless router.

WPS (PIN code): Even if your wireless router does not have a dedicated WPS button, it may support WPS using

a PIN code instead. For setup using a PIN code, you will need to know in advance how to activate the wireless

router’s WPS function. For details refer to the instruction manual of your wireless router.

Searching for Access Points: If your access point does not support the WPS function or you cannot activate it,

you can have the camcorder search for access points in the area.

Manual Setup: If the access point you want to use has stealth mode activated and it cannot be automatically

detected by the camcorder, you can enter all the necessary settings manually. This requires more advanced

knowledge of Wi-Fi and network settings.

Camera Access Point: When shooting in a location where there are no access points available, the camcorder

can serve as a wireless access point*. Wi-Fi enabled devices will be able to connect to the camcorder directly.

* Limited only to the connection between the camcorder and supported Wi-Fi enabled devices. The functionality is not the same

as that of commercially available access points.

Wi-Fi Protected Setup (WPS)

Wi-Fi Protected Setup (WPS) is the easiest way to connect to a Wi-Fi access point. You can do simply by

pushing a button (if the access point (wireless router) you want to connect to has a WPS button) or using a PIN

code issued by the camcorder.

Wireless Routers with a WPS Button

1 Open the [Set Up New] submenu.

[w Other Functions] > [Network Settings] > [Connection Settings]

> [Set Up New]

2 Select the [WPS: Button] method.

[Wi-Fi] > [Infrastructure] > [WPS: Button]

3 Press and hold the WPS button on the wireless router.

• The length of time required to hold down the WPS button depends

on the wireless router. Refer to the instruction manual of your wireless

router and make sure the wireless router’s WPS function is activated.

Operating modes:

[w Other Functions]

[Network Settings]

[Connection Settings]

[Set Up New]

COPY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon XF200 Seite 173

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon XF200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info