Bedienungsanleitung Canon XF200 (Seite 181 von 246) (Englisch)

615742

181

Zoom out

Zoom in

Vorherige Seite

1/246

Nächste Seite

181

Browser Remote: Controlling the Camcorder from a Network Device

Browser Remote: Controlling the Camcorder from a Network

Device

After connecting the camcorder to a network (Wi-Fi or using the LAN terminal), you can control the camcorder

remotely from the Web browser of a connected network device* using the Browser Remote application. Browser

Remote lets you monitor the image through live view, start and stop recording and remotely control the shutter

speed, gain and other settings. You can also create, edit and transfer a metadata profile** and check the

recording media, remaining recording time, time code, etc.

* For details about compatible devices, operating systems, Web browsers, etc., please visit your local Canon Web site.

**MXF clips only.

Setting Up Browser Remote

Initially, basic default network settings for a browser connection (camera ID, user names and passwords) are

already saved in the camcorder. You can check these settings on the status screens (A 218). With the following

procedures you can change the default settings, if you prefer.

Camcorder Settings

You can set a unique camcorder identification code and designate the port that the Browser Remote application

should use when accessing the camcorder through a network. The port number (HTTP protocol) used by

Browser Remote is usually set to port 80, but you can change it if necessary. The camcorder ID will appear on

the Browser Remote screen, making it easy to identify which camcorder the application is controlling in case of a

multi-camera shooting setup.

1 Open the [Camera Settings] submenu.

[w Other Functions] > [Network Settings] > [Settings for Browser]

> [Camera Settings]

2 Push the joystick up/down to select a value for the first digit of

the port number and then press SET to move to the next digit.

3 After completing all the digits, select [Set] and then press SET to

confirm the port number.

4 To enter the [Camera ID], select [Input] and then press SET.

• Enter the desired camcorder ID using the keyboard screen (A 175).

5 Select [OK] and then press SET to save the network

configuration.

6 When the confirmation message appears, press SET.

User Settings

A user name and password are required before the Browser Remote application can access and operate the

camcorder. You can set up to three different users and select whether you want to allow single-user operation

(full control) or two-user operation (one controlling camcorder functions and another in charge of metadata input

for MXF clips).

[Full Control User] Can access all 3 Browser Remote screens: [Advanced Control], [Basic Control] and

[Metadata Input].

[Camera Control User] Can access only the [Advanced Control] screen. This would be the main operator

controlling the camcorder.

Operating modes:

[w Other Functions]

[Network Settings]

[Settings for Browser]

[Camera Settings]

COPY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon XF200 Seite 181

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon XF200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info