Bedienungsanleitung Canon XF200 (Seite 209 von 246) (Englisch)

615742

209

Zoom out

Zoom in

Vorherige Seite

1/246

Nächste Seite

209

Menu Options

In mode, not available in some index screens and playback modes.

Setting options for [Assignable Buttons]: [(NONE)], [Img Stab.], [POWERED IS], [Focus Limit], [Face AF], [Backlight], [Spotlight],

[Digital Zoom], [Tele-converter], [Wide-End Angle], [Gain Mode], [Shutter Mode], [Shutter Increment], [WB Mode], [PEAKING],

[ZEBRA], [WFM], [MAGN.], [TL-H58], [WA-H58], [Color Bars], [Infrared Monochrome], [Infrared Light], [Markers], [OLED Setup],

[Viewfinder Setup], [OLED/VF B&W], [Onscreen Display], [MP4 Start/Stop] (only for assignable buttons 1 to 4), [MP4 FTP

Transfer], [Add Shot Mark 1], [Add Shot Mark 2], [Add $ Mark], [Add % Mark], [Time Code], [Time Code Hold], [HEADPHONE

+], [HEADPHONE -], [Monitor Channels], [Audio Level], [Wireless Controller], [Photo], [Status], [My Menu], [Initialize Media], [User

Setting].

The default settings are as follows. [1]: [PEAKING], [2]: [ZEBRA], [3]: [POWERED IS], [4]: [MAGN.], [5] to [10]: [NONE],

[11]: [HEADPHONE +], [12]: [HEADPHONE -], [13]: [WFM].

Available only when the optional GP-E2 GPS Receiver is connected to the camcorder.

[Reset]: Reset various camcorder settings.

[All Settings]: Resets all the camcorder’s settings to default settings, except for the hour meter.

[Camera Settings] ( mode only): Resets the white balance, iris, gain, shutter speed,

[~ Camera Setup] settings and custom picture settings to default settings.

[Assignable Buttons]: Resets the assignable buttons to default settings.

[Tally Lamp] ( mode only): Allows you to set whether the front and rear tally lamps illuminate while the

camcorder is recording.

[POWER LED]: Allows you to set whether the power indicator illuminates while the camcorder is on.

[Media Access LED]: Allows you to set whether the CF card access indicators or the SD card access indicator

illuminate while the camcorder is accessing a CF card or SD card.

[LAN (Ethernet) LED]: Allows you to set whether the LAN access indicator illuminates when the camcorder is

accessing a network via the LAN cable.

[Network Settings] [Connection Settings]

[Set Up New]

– 173,

178

[Select] [No.1] to [No.5] 179

[Edit] [Settings], [Rename] 180

[Settings for Browser]

181[Camera Settings] –

[User Settings] [One User (Full Control)], [Two Users (Camera/Meta)]

[FTP Transfer Settings]

188

[FTP Server Settings] –

[Create Folder by Date] [On], [Off]

[Same Named Files] [Skip], [Overwrite]

[IP Streaming Settings]

192

[Bit Rate/Resolution] [9 Mbps 1280x720], [4 Mbps 1280x720], [1.5 Mbps 640x360]

[Audio Channels] [CH1/CH2], [CH3/CH4]

[Protocol] [UDP], [RTP], [RTP+FEC]

[Receiver Settings] –

[FEC Settings] – 193

[GPS Auto Time]

[On], [Off] 112

[Initialize Media] [CF A] [Cancel], [OK]

41[CF B]

[SD Card] [Complete], [Quick]

[Certification Logos] – –

[Firmware] – –

Menu item Submenus Setting options A

COPY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon XF200 Seite 209

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon XF200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info