Bedienungsanleitung Canon XF705 (Seite 155 von 231) (Englisch)

709292

155

Zoom out

Zoom in

Vorherige Seite

1/231

Nächste Seite

155

Connecting to a Wi-Fi Network

Camera Access Point

In this mode the camcorder itself serves as a wireless access point to which other Wi-Fi-enabled devices can

connect. Initially, basic settings for a Camera Access Point connection (network name (SSID):

[XF705-xxxx_Canon0C], password: [12345678]) are already saved under network configuration profile [1:]. You

can use the default settings to connect immediately to the camcorder or follow the procedure below if you wish

to change the settings.

1 Select [Connection Settings].

> [ ! Network Settings] > [Connection Settings]

2 Select the desired network configuration profile and then select [Camera Access Point].

Network configuration profile ([1:] to [4:]) > [Edit] > [Camera Access Point]

• You can save up to 4 network configuration profiles in the camcorder. Push the joystick up/down to select

the desired profile.

3 Enter the SSID (network name) the camcorder will use as a Wi-Fi access point.

[Input] > Enter the desired network name using the keyboard screen (A 27) > [OK]

4 Select the frequency band for the Wi-Fi connection ([5 GHz] or [2.4 GHz]) and then press SET.

• For users of model ID0118 PAL (A 17): Because only the 2.4 GHz frequency band is available for Camera

Access Point mode, skip to step 5.

5 Select the channel and then press SET.

• Available channels will differ depending on the selected frequency band. (Not applicable depending on the

model.)

6 Select the encryption method and then press SET.

• If you selected [Open/No encryption], skip to step 8.

7 Enter the encryption key (password).

[Input] > Enter the desired password using the keyboard screen (A 27) > [OK]

• This password is needed to connect the network device to the camcorder. If necessary, write it down.

8 Continue with the procedure to configure the IP address assignment (A 155).

Configuring the IP Address Settings

At this point you need to configure the TCP/IP settings. If you need to configure the TCP/IP settings manually,

consult the network administrator to obtain the relevant information.

1 Select the method for assigning the IP address ([Automatic] or [Manual]) and then press SET.

• If you selected [Automatic], the IP address will be assigned automatically. Continue with the procedure to

review and save the configuration (A 156).

2 Enter the IP address.

• Push the joystick up/down to select a value for the first field and then press SET to move to the next field. After

completing the four fields of the address, select [Set] and then press SET.

3 Enter the rest of the necessary TCP/IP settings in the same way.

• Camera Access Point connections: Enter the [Subnet Mask].

• Infrastructure/Ethernet connections: Enter the [Subnet Mask], [Default Gateway], [Primary DNS Server] and

[Secndry DNS Server]. If necessary, touch [Í]/[Î] to scroll up/down.

4 After completing the necessary settings, continue with the procedure to review and save the configuration

(A 156).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon XF705 Seite 155

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon XF705

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info