Bedienungsanleitung Canon XF705 (Seite 162 von 231) (Englisch)

709292

162

Zoom out

Zoom in

Vorherige Seite

1/231

Nächste Seite

Browser Remote: Controlling the Camcorder from a Network Device

162

Browser Remote: Controlling the Camcorder from a Network

Device

After connecting a network device to the camcorder via Wi-Fi, you can operate the camcorder remotely using

Browser Remote, a Web browser application that can be accessed using the Web browser on network devices*.

Using Browser Remote, you can check the camcorder’s live view image and control various recording settings.

On the Browser Remote screen, you can also check the remaining recording time on the card, remaining battery

charge and the camcorder’s time code.

* For details about compatible devices, operating systems, Web browsers, etc., please visit your local Canon website.

Setting Up Browser Remote

You can set a unique camcorder identification code and designate the port that the Browser Remote application

should use when accessing the camcorder through the network. The port number (HTTP protocol) used by

Browser Remote is usually set to port 80, but you can change it if necessary. The camcorder ID will appear on

the Browser Remote screen, making it easy to identify which camcorder the application is controlling in case of a

multi-camera shooting setup.

Camcorder Settings

1 Select [Browser Remote Settings].

> [ ! Network Settings] > [Browser Remote Settings]

2 To change the port number, select [Port No.].

• To enter the port number, push the joystick left/right to select the digit to change and then up/down to select

a value for the selected digit. After completing the five digits of the port number, select [Set] and then press

SET.

3 To change the camcorder ID, select [Camera ID].

• Enter the desired camcorder ID using the keyboard screen (A 27).

User Settings

A user name and password are required to log in to the Browser Remote application. You can set up to three

different users and select whether you want to allow single-user operation (full control) or two-user operation

(one controlling camcorder functions and another in charge of metadata input for clips).

[Full] Can access all 3 Browser Remote screens: [

] (main recording screen), [ ] (metadata screen)

and [ ] (basic screen).

[Camera] Can access only the [

] (main recording) screen. This would be the main operator controlling

the camcorder.

[Meta] Can access only the [ ] (metadata) screen. This would be the person in charge of keeping the

clip information up to date.

1 Select [Browser Remote Settings]

> [ ! Network Settings] > [Browser Remote Settings]

2 To select the number of Browser Remote users, select [Users Settings].

3 Select the desired option and then press SET.

• If you selected [One User (Full)], perform steps 4-5 to enter the user name and password for the [Full] user. If

you selected [Two Users (Camera/Meta)], perform steps 4-5 twice, once for the [Camera] user and again for

the [Meta] user.

Operating modes:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon XF705 Seite 162

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon XF705

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info