Bedienungsanleitung Canon XF705 (Seite 174 von 231) (Englisch)

709292

174

Zoom out

Zoom in

Vorherige Seite

1/231

Nächste Seite

IP Streaming

174

Receiver Settings

1 Select [IP Streaming Settings].

> [ ! Network Settings] > [IP Streaming Settings]

2 Select [Dest. IP Address] and enter the IP address assigned to the decoder.

• Push the joystick up/down to select a value for the first field of the address and then press SET to move to

the next field. After completing the four fields of the address, select [Set] and then press SET.

3 To change the port number, select [Dest. Port No.].

• To enter the port number, push the joystick left/right to select the digit to change and then up/down to select

a value for the selected digit. After completing the five digits of the port number, select [Set] and then press

SET.

• Using the default port number is recommended.

FEC Error Correction Settings

1 Select [IP Streaming Settings].

> [ ! Network Settings] > [IP Streaming Settings]

2 To enter the port number used for FEC packets, select [FEC Port No.].

• To enter the port number, push the joystick left/right to select the digit to change and then up/down to select

a value for the selected digit. After completing the five digits of the port number, select [Set] and then press

SET.

• Using the default port number is recommended.

3 To change the interval for FEC packets, select [FEC Interval].

• Select the desired option and then press SET.

Streaming Video over IP

1 Connect the decoder to the network and complete any necessary configurations on the receiving

side so the decoder is ready to receive video over IP.

• For details refer to the instruction manual of the decoder device or software you will use.

2 Select the desired network (A 160).

• Use an Ethernet connection (A 159) and connect the camcorder to the desired network using an Ethernet

cable.

3 Activate IP streaming on the camcorder.

> [ ! Network Settings] > [Network Functions] > [IP Streaming]

4 When the confirmation message appears, select [OK] and then press SET.

• and will appear at the top of the screen. When the icons turn white, the camcorder will start

streaming video over the selected network.

5 When you have finished streaming the desired video, turn off the network functions.

> [ ! Network Settings] > [Network Functions] > [Off]

• The network icons will turn yellow and then disappear from the screen.

NOTES

• While IP streaming is activated, the camcorder will continue to broadcast video and audio data over the IP

network, regardless of the status of the receiver. The streamed data is not encoded. Be careful to set up the

correct IP address and test in advance that the receiving decoder can indeed receive the signals.

• Depending on the network used and the connection conditions, you may experience lost or delayed IP

packets.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon XF705 Seite 174

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon XF705

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info