543020
64
Zoom out
Zoom in
Vorherige Seite
1/158
Nächste Seite
64
Recording in Aperture-Priority (Av) Mode
The aperture value can be adjusted in 1/16 EV stops; however, the aperture value displayed on the
screen will change only in 1/4 EV stops.
Available aperture values (with the HD 20x L IS II or HD 20x L IS III lens)
F1.6, F1.8, F2.0, F2.2, F2.4, F2.6, F2.8, F3.2, F3.4, F3.7, F4.0, F4.4, F4.8, F5.2, F5.6, F6.2, F6.7, F7.3, F8.0,
F8.7, F9.5, F10*, F11*, F12*, F14*, F15*, F16*, F17*, F19*, F21*, F22*, CLOSE*
* Can only be selected if the custom function [IRIS LIMIT] is set to [OFF].
1. Set the dial to Av.
2. Select the aperture using the IRIS dial or
the iris ring (only lenses with manual iris
ring, like the HD 20x L IS III lens).
With the custom function [RINGS DIRECTION]
( 100) you can change the direction of the
adjustment when you turn the iris ring and IRIS dial
(the setting is common to both).
Settings other than the aperture value (shutter speed, etc.) are adjusted automatically.
Using exposure lock to adjust the exposure manually will change the aperture, overriding the value
selected in Av mode.
When the GAIN dial is set to A (automatic gain), the numeric value on the screen flashes when the
selected aperture is not appropriate for the recording condition. In such case, readjust the
aperture.
When the built-in ND filter is activated, the picture may become dark when you set a high aperture
value. In such case, turn off the ND Filter first and readjust the aperture.
With the custom function [IRIS LIMIT] ( 100) you can activate the iris limit to prevent the
aperture from closing below the diffraction limit of the lens. If the iris limit is not activated, aperture
values that exceed the diffraction limit will appear in gray when selecting the aperture. Using
aperture values displayed in gray will cause diffraction blur.
When a lens without iris control function is used, the aperture value will not appear on the screen.
With the custom function [LANC AE SHIFT] ( 100), you can change the function of the AE SHIFT
dial on the optional ZR-2000 Zoom Remote Controller and use it to change the aperture value.
IRIS ring
64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon XL H1A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Canon XL H1A

Canon XL H1A Bedienungsanleitung - Deutsch - 165 seiten

Canon XL H1A Bedienungsanleitung - Holländisch - 159 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info