Installing the loudspeakers
Choose the most appropriate position for installing the loudspeakers. Using the measurements given in the data sheet, check the
suitability of the location in the vehicle for installation. Ensure that the loudspeakers do not touch or affect the operation of any
moveable parts (door handle, window handle, tailgate mechanism, etc).
Installation in the original installation locations
If a Canton 2-way system is installed in the original installation locations, once the door panel and the original loudspeakers, if
available, have been removed the woofer can be fitted. Check in advance whether you may need a vehicle specific
installation adapter.
Installation in the trunk
Firstly, using a template, mark the drill holes and cut-outs required then cut these out of your trunk.
Remove the grille from the loudspeaker. Ensuring correct polarity, connect the wires to the loudspeakers. Position the grille with
the loudspeaker over the drill holes in the installation area and screw fasten them. Affix the enclosed, self-adhesive felt strips to
the loudspeaker grille and fit this accurately.
Rigidity of the trunk
Ensure that fitting the loudspeaker system does not cause the trunk to lose its rigidity. If necessary, strengthen the installation
area. In some vehicles it may be useful to replace the original boot with a chipboard or MDF panel or a soundboard.
