Bedienungsanleitung Carat CARACOUP 60 (Seite 18 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch)

816451

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

. GENERAL

1.1 Operating manual

This operating manual provides guidance on safe and

eicient operation and should form a basis of any actions

involving the machine. It is an integral part of the machine,

which should be kept in the immediate vicinity accessible

for its operating personnel. Prerequisite of safe operation is

adherence to all safety and handling instructions.

Therefore, before starting any work, the personnel must

read carefully and understand the operating manual.

Moreover, the accident prevention regulations applicable

at the site of the machine operation and general safety

regulations must be complied with.

1.2 Explanation of symbols

Warnings and safety instructions

Warnings and safety instructions in the manual are

identied with the pictograms and provided in blocks

highlighted in grey.

DANGER

... draws attention to an immediate danger that, if

not avoided, may result in heavy or even fatal injuries.

ATTENTION!

... draws attention to potentially dangerous situa-

tions that, if not avoided, may result in material damage.

… marks danger due to electric current.

Failure to observe the safety instructions leads to

danger of heavy or fatal injuries.

… marks danger of crushing.

Failure to observe the safety instructions leads to

danger of heavy injuries from moving parts.

… marks danger due to hot surface.

Failure to observe the safety instructions leads to

danger of burns and heavy skin injuries caused by heat.

… marks danger from moving diamond blades.

Failure to observe the safety instructions leads to

danger of cuts and heavy skin injuries caused by rotating

diamond blades.

1.3 Liability limitation

All data and instructions provided in this manual were

compiled with consideration of applicable standards

and regulations, state of the art in this eld and our

long-standing insights and experience.

The manufacturer accepts no liability for damages

caused by:

- Non-observance of the Operating manual.

- Unintended use.

- Employment of unskilled and uninstructed personnel.

- Unauthorized conversions.

- Technical changes.

- Use of non-approved spare parts.

The responsibilities agreed in the delivery contract, the

General Terms and Conditions as well as the delivery

conditions of the manufacturer and the statutory

regulations valid at the time of the conclusion of the

contract shall apply.

Warranty

The manufacturer guarantees the functional capability

of the applied process technology and performance

parameters identied. The warranty period commences

with the defect-free delivery.

Warranty conditions

12 months aer delivery of mechanical and electrical

components for one-shi operation, except for the wear

parts and tools.

The warranty claim expires, if the system was not installed

and started up by our experts.

The warranty extends to the replacement parts. Conse-

quential damages are excluded.

Damage caused by natural wear, decient of improper

maintenance, failure to comply with the operating regula-

tions, excessive loads and use of inappropriate equipment

shall be excluded from the warranty.

. SAFETY

2.1 Intended use

The CARACOUP 60 / CARACOUP 104 tile cutting machine

is designed exclusively for the following purposes in the

commercial sector: is designed for wet cutting of the solid

construction materials such as: Tile, ceramic and marble

- Any claims for damages resulting from unintended use

are excluded.

- The operator alone is responsible for all damages due to

unintended use.

2.2 Rationally foreseeable misuse

Any use of the machine going beyond the intended one,

shall be deemed unintended and thus prohibited.

This also applies to:

- Cutting any materials other than presented.

- Cutting without or with open diamond blade guard.

- Cutting without water.

- Removal of clippings in pendulum cutting procedure

(vertical plunging into chippings from above).

2.3 Responsibilities of the operator

Operator

An operator is every natural or legal person, who uses the

machine or delegates its use to others and is responsible

for the safety of the user, personnel or third parties in the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Carat CARACOUP 60 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info