Bedienungsanleitung Carat EasyCoupCompact (Seite 14 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch)

816478

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

. OPERATION

4.1 Transport Safety lock

Before any work on the power tool itself, pull the

main plug. The transport safety-lock 6 enables

easier handling of the power tool when transporting to

various working locations.

4.2 Releasing the Machine (Working Position)

- Push the tool arm downward by the handle 1

to releave the load on the transport safety-lock 6.

- Pull the transport safety-lock 6 completely outward.

- Guide the tool arm slowly upward.

Note: When working, pay attention that the transport

safety-lock is not pushed inwards. Otherwise, the tool arm

cannot be lowered to the requested depth.

4.3 Securing the Machine (Transport Position)

- Lower the tool arm until the transport safety-lock 6 can

be pushed completely inward.

. STARTING OPERATION

(see figure B)

5.1 Switching On and O

- For starting operation, push the lock-on button 22 in the

direction of the tool arm. Then press the On/O switch 2

and keep it pressed.

Note: For safety reasons, the On/O switch 2 cannot be

locked on but must remain pressed during operation.

- To switch o the machine, release the On/O switch 2.

. WORKING INSTRUCTIONS

Before any work on the power tool Itself, pull

the mains plug.

6.1 General Cutting Instructions

Protect the diamond blade against impact and shock. Do

not subject the diamond blade to lateral pressure.

Do not strain the power tool so heavily that it comes to a

standstill. Excessive feed considerably reduces the perfor-

mance capability of the machine and shortens the service

life of the diamond blade. Use only diamond blades that

are suitable for the material to be worked.

Maximum workpiece dimensions mm

0°

120 x 120

170 x 85

. GENERAL POWER TOOL SAFETY WARNINGS

Failure to follow the warnings and instructions

may result in electric shock, fire and/or serious

injury. Save all warnings and instructions for future refer-

ence. The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool

7.1 Work area safety

a) Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

b) Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases, or

dust. Power tools create sparks which may ignite the

dust or fumes.

c) Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

7.2 Electrical safety

a) Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodied plugs and

matching outlets will reduce the risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric shock

if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged

or entangled cords increase the risk of electric shock.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Carat EasyCoupCompact Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info