Bedienungsanleitung Carat MultiCoup 350 (Seite 16 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch)

816479

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

 

1.1 OperatingManual

This operating manual provides guidance on safe and ei-

cient operation and should form a basis of any actions in-

volving the machine. It is an integral part of the machine,

which should be kept in the immediate vicinity accessible

for its operating personnel. Prerequisite of safe operation

is adherence to all safety and handling instructions.

Therefore, before starting any work, the personnel must

read carefully and understand the operating manual.

Moreover, the accident prevention regulations applicable

at the site of the machine operation and general safety

regulations must be complied with.

1.2 Explanationofsymbols



Warnings and safety instructions in the manual are

indicated with the pictograms and provided in blocks

highlighted in grey and yellow.

 

... draws attention to an immediate danger that, if

not avoided, may result in heavy or even fatal injuries.

 

... draws attention to potentially dangerous situa-

tions that, if not avoided, may result in material damage.

... marks danger due to electric current.

Failure to observe the safety instructions leads to

danger of heavy or fatal injuries.

... marks danger of crushing.

Failure to observe the safety instructions leads to

danger of heavy injuries from moving parts.

... marks danger due to hot surface.

Failure to observe the safety instructions leads to

danger of burns and heavy skin injuries caused by heat.

... marks danger from moving diamond blades.

Failure to observe the safety instructions leads to danger

of cuts and heavy skin injuries caused by rotating dia-

mond blades.

1.3 Liabilitylimitation

All data and instructions provided in this manual were

compiled with consideration of applicable standards

and regulations, state of the art in this field and our

long-standing insights and experience.

The manufacturer accepts no liability for damages

caused by:

- Non-observance of the Operating manual.

- Unintended use.

- Employment of unskilled and uninstructed personnel.

- Unauthorized conversions.

- Technical changes.

- Use of non-approved spare parts.

The responsibilities agreed in the delivery contract,

the General Terms and Conditions as well as the delivery

conditions of the manufacturer and the statutory

regulations valid at the time of the conclusion of the

contract shall apply



The manufacturer guarantees the functional capability of

the applied process technology and performance param-

eters identified. The warranty period commences with the

defect-free delivery.



12 months aer delivery of mechanical and electrical

components for one-shi operation, except for the wear

parts and tools.

The warranty claim expires, if the system was not installed

and started up by our experts.

The warranty extends to the replacement parts.

Consequential damages are excluded.

Damage caused by natural wear, deficient of improper

maintenance, failure to comply with the operating

regulations, excessive loads and use of inappropriate

equipment shall be excluded from the warranty.

 

2.1 Intendeduse

This MultiCoup 350 machine is designed exclusively for

the following purposes in the commercial sector: Dry

and wet cutting of the solid construction materials such

as: Clinker, bricks, concrete block products, refractory,

natural and artificial stone products as well as tiles and

ceramics.

- Any claims for damages resulting from unintended

use are excluded.

- The operator alone is responsible for all damages due

to unintended use.

2.2 Rationallyforeseeablemisuse

Any use of the machine going beyond the intended one,

shall be deemed unintended and thus prohibited

This also applies to:

- Cutting any materials other than presented.

- Cutting without or with open diamond blade guard.

- Removal of clippings in pendulum cutting procedure

(vertical plunging into clippings from above).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Carat MultiCoup 350 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info