Bedienungsanleitung Carat SL-1253N DUSTEC (Seite 17 von 44) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch)

816480

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

ENGLISH

Remove the remaining n of the material with the wedge

[15].

Curved cuts are not possible, the diamond grinding wheels

will jam in the material.

When breaking through walls, e.g. with a rotary hammer,

most of the chipping-o󰀨 of the surface material can be avoi-

ded by rst grinding a slot with maximum grinding depth.

For grinding especially hard material, e.g. concrete with

high pebble content, the diamond grinding wheels can

overheat and get damaged. This is clearly indicated by cir-

cular sparking, rotating with the diamond grinding wheels.

When this occurs interrupt the grinding process and allow

the diamond grinding wheels to cool down. Run the power

tool for a short time at no-load speed.

Working advice

• Be careful grinding slots in structural walls. See section

“Information on Structures”.

• Do not strain the power tool so heavily that it comes to

a standstill.

• Firmly support the work piece, secured against sliding,

e.g. with clamping devices.

• The power tool may only be used for grinding without

the use of water.

• Noticeable decreasing work progress and circular spar-

king indicates the diamond grinding wheels are become

dull. Briey grinding a abrasive material (e.g. limestone

brick) can sharpen the wheels again.(zoals kalkzand-

steen).

Information on Structures

Slots in structural walls are subject to the standard DIN

1053 part 1 or national-specic regulations. These regu-

lations must be observed. Consult the responsible struc-

tural engineer, architect or construction supervisor before

starting.

The permitted slot depth and width depends on the slot

length, wall thickness and the used construction materials.

EMISSION

Vibration emission value ah = 6 m/s².

Uncertainty K < 1.5 m/s².

Typically the A-weighted noise levels of the pro-

duct are: Sound pressure level 93 dB(A); Sound

power level 104 dB(A). Uncertainty K=3 dB.

Measured values determined according to EN 62841.

ENVIRONMENTAL PROTECTION

According to the European regulation 2012/19/

EU, CARAT is responsible to recycle old electric

drill motors. You are therefore requested to re-

turn old CARAT electric drill motors to your local

reseller.

SERVICE AND MAINTENANCE

Pull the mains plug of the power tool from the

socket, before any work on the machine itself.

For safe and proper working, always keep the

machine and ventilation slots clean.

Dismount and clean the diamond grinding wheels and spa-

cers after nishing. Clean the guard and extraction hood.

WARRANTY

For the machine, a guarantee period of 12 months applies

from the moment of delivery. Guarantee claims must be

shown by submission of purchase invoice. The guarantee

includes the repair of defects which have occurred and can

be linked by to material or manufacturing faults.

Not covered by guarantee:

• Defects or damages which have arisen

due to incorrect use or connection.

• Machine overload.

• When maintenance has been carried

out incorrectly or badly.

• Information in the manual has not been

properly followed.

• The machine is used by unqualied persons.

• If the machine is used for purposes

for which it is unsuitable.

• The machine is repaired using unoriginal parts.

• If the machine encryption is damaged or deleted.

• If defects are caused by re, damp and/or transport.

DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product is

in conformity with the following standards or standardized

documents:

EN 62841-1; EN 61000; 2006/42/EC; 2014/30/EC;

2011/65/EU

Director: C.J. van Beek

16-09-2022

CARAT Nederland B.V.

Nikkelstraat 18, 4823 AB Breda, the Netherlands

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Carat SL-1253N DUSTEC Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info