816467

Carat T-4010 Seite 11

11
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
2120
ENGLISH
2.7 Risks
CAUTION!
Risk of cut injuries!
Reaching into rotating tools may lead to heavy injuries.
- Do not touch rotating diamond blades in any
circumstances.
- Never work without diamond blade guard.
- Only work with diamond blade guard closed.
- Only remove clippings with diamond blade stopped.
CAUTION!
Risk of injury by flying clippings or tool parts!
- Failure to wear appropriate protective equipment,
working with open diamond blade¬ guard or with
inappropriate diamond blades may lead to heavy
injuries.
- Wear protective goggles.
- Only work with diamond blade guard closed.
- Only work with diamond blades, specifically designed for
the material to be cut.
CAUTION!
Risk of injury by pinching in movable parts!
Failure to wear appropriate protective equipment may
lead to heavy injuries.
- Wear protective gloves.
- Lock the cutter head.
- Lock the guiding bridge.
- Always fix the cutting table with transport lock
(for table saw machines).
DANGER!
Danger to life from electric current!
Touching live parts leads to death. Damaged insulation or
individual components can be life-threatening.
Disconnect the machine from the power supply before
any work on the electric system. Verify that the system is
disconnected from power supply.
- Switch o ¬power supply before maintenance, cleaning
and repair operations and secure the machine against
being restarted.
- If the power supply insulation is damaged, switch o
immediately and arrange for repairs.
- Never bypass or disable fuses.
- Always use fuses with correct amperage when replacing
defective fuses.
- Keep moisture away from live parts.
- Any works on the electrical installations must be carried
out by qualified electricians.
CAUTION!
Risk of burns on hot surfaces.
- Contact with hot parts may cause burns.
- Do not touch the surface.
- Before every work, make sure that the parts have cooled
down to the ambient temperature.
CAUTION!
Danger of injuries caused by special physical
eects
Failure to wear appropriate protective equipment
may lead to heavy injuries. Wear ear protectors. Wear
protective gloves. Take adequate breaks. Regular medical
examinations ‘G20‘.
CAUTION!
Risk of injury by hazardous substances, such as
dust and cutting water or slurry!
Failure to wear appropriate protective equipment may lead
to damage to health. Use personal protective equipment.
Renew the cutting water regularly. Use the dust mask.
Connect water supply.
CAUTION!
Risk of injury due to inadequate lighting.
Work in inadequate lighting conditions may lead to heavy
injuries. Provide for adequate lighting at the workplace.
WARNING:
Danger to life due to defective or bypassed
safety devices!
Inoperable, bypassed or disabled safety devices do not
protect from hazards and may lead to heavy or fatal
injuries.
Before commencement of works, always make sure that all
safety devices are properly installed and functional.
Never disable safety devices.
Ensure that the safety devices are always freely accessible
WARNING:
Risk of injury due to wrong spare parts.
Wrong spare parts can seriously compromise safety and
cause damage and malfunction up to total failure.
As a matter of principle, only original spare parts must
be used. Original spare parts can be obtained via an
authorized dealer or directly from the manufacturer.
2.8 Signage
Danger from electric current!
DANGER!
Danger to life from electric current!
Touching live parts leads to death.
- Damaged insulation or individual parts can be life-
threatening. Disconnect the machine from the power
supply before any work on the electric system.
- Check ¬that no voltage is present! Switch o power
supply before maintenance, cleaning and repair
operations and secure the machine against being
restarted.
- If the power supply insulation is damaged, switch o
immediately and arrange for repairs.
- Never bypass or disable fuses.
- Always use fuses with correct amperage when replacing
defective fuses.
- Keep moisture away from live parts.
- Any works on the electrical installations must be carried
out by qualified electricians¬.
- Annual check of the electric system according to
VDE0701.
CAUTION!
Risk of cut injuries!
Reaching into moving tools may lead to heavy injuries.
- Do not touch rotating diamond blades in any
circumstances.
- De-energize the machine before replacing the diamond
blade.
There are the following symbols and information signs on
the machine that refer to potential dangers:
Warning of rotating tool!
Running direction of the
saw blade
Wear gloves. Wear ear
protectors. The machine
meets EU guideline.
Observe the operating
manual. Wear protective
goggles
Laser
Class 2
635 mm
DO NOT
STARE
INTO
BEAM
ATTENTION
Laser class: II
Wavelength: 635 nm
Warning!
Do not stare into beam!
. MACHINE DATA
3.1 Diamond blades
DANGER!
Risk of injury by defective or incorrectly mounted
diamond blades!
Wrong rotation direction and damaged diamond blades
may cause injuries of personnel!
Check diamond blades for broken o segments and
segment pieces, segment foot cracks, diamond blade
deformations or signs of wear before starting work.
Pay attention to the rotation direction arrows on the
diamond blades and guard!
DANGER!
Risk of injury by unchecked or unapproved tool!
Diamond blades or buzz saw blades that have not been
checked or approved may cause injuries of personnel!
Before starting work, check whether a proper diamond
blade is mounted.
Pay attention to the rotation direction arrows on the
diamond blade and guard!
NOTE!
All diamond blades used must be designed in
terms of their permissible max. cutting ¬speed¬ to match
the max. drive speed and intended application of the
machine tool
Cutting wheel Diameter Material
Carat concrete
diamond blade
T-3510
Ø350 mm
T-4010
Ø400 mm
T-5010
Ø500 mm
T-6010
Ø600 mm
T-7010
Ø700 mm
Concrete, washed
concrete, bricks
Carat universal
diamond blade
Concrete, washed
concrete, bricks,
clinker, hard stone,
granite
Carat tiles and
natural stone
diamond blade
Hard stone, granite,
natural and artificial
stone, hard clinker
3.2 Type plate
The type plate is located on the base frame of the machine
tool.
3.3 Installation site requirements
The floor surface must:
- Have suicient load bearing capacity.
- Be slip proof.
- Be level.
3.4 Storage requirements
Storage conditions
As a matter of principle, the machine, its components,
assemblies or parts must be only stored in the following
conditions: do not store outdoors. store in dry and dust-
free place. do not expose to aggressive media. protect
from solar radiation. avoid mechanical vibrations. storage
temperature range 5 to 45°C
relative air humidity, max. 60%. In case of storage for
over 3 months, check general condition of all parts and
… 11 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Carat T-4010 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info