Bedienungsanleitung Carat TYPE BS-1253N DUSTEC (Seite 10 von 36) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch)

816485

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

10 NMHX025

01-01-2018

ENGLISH – ORIGINAL INSTRUCTIONS

Do not touch the diamond grinding tool before it cooled

down! The diamond grinding tool may become very hot

while operating.

Never push the spindle lock button when the spindle is still

rotating! Otherwise the machine may damage.

• Push the spindle lock button [7] to lock the grinder

spindle.

• Loosen the clamping nut (D) with aid of the two-pin span-

ner [14] and dismount it from the spindle. Remove the

diamond grinding tool (C).

OPERATION INSTRUCTIONS

Verify the switch [8] actuates properly and returns

to the 0-position when the rear of the switch lever

is pressed, before plugging in the power tools.

Work piece clamping

The work piece must be well supported and secured

against sliding, for example by the means of clamping

devices.

Usage

Connect the power tool to an power supply with the same

current as stated on the nameplate.

Connect and switch on the dust extractor.

To start the power tool, slide the ON/OFF-switch [8]

towards the front. For continuous operation, press the front

of the switch to lock it.

To stop the power tool, press the rear of the switch so it

returns to the OFF-position.

Check grinding tools before using. The grinding tool must

be mounted properly and be able to move freely. Carry

out a test run for at least one minute with no load. Do not

use damaged, out-of-centre or vibrating grinding tools.

Damaged grinding tools can burst and cause injuries.

Operate the power tool with both hands.

used must be at least the 10.200 per minute.

Always select a type diamond grinding tool suitable for the

specic material to be grinded. We advise diamond grin-

ding tools from Carat. Observe the manual of the grinding

tools.

Make sure the diamond grinding tool is rotating in the cor-

rect direction. Verify the direction of the arrow on the dia-

mond grinding tool is corresponding the direction of the

arrow on the power tool.

Clean the grinder spindle and all parts to be mounted

before you start. Verify the condition of the anges and

diamond grinding tool. The supporting surfaces between

the anges and the diamond grinding tool must be clean

and t well.

• Place the mounting ange (B) in such way on the grin-

der spindle (A) the centre-bushing is pointing outwards.

The mounting ange must be mounted in such way the

rotation-lock (two at surfaces) is corresponding with the

at surfaces of the grinder spindle.

• Mount the diamond grinding tool (C) on the mounting

ange.

• Push the spindle lock button [7] to lock the grinder spin-

dle. Screw on the clamping nut (D) on the spindle and

tighten it with the two-pin spanner [14]. Make sure the

bushing of the clamping nut is pointing outwards.

After mounting the diamond grinding tool and before swit-

ching on, check that the diamond grinding tool is correctly

mounted and that it can turn freely. Make sure that the dia-

mond grinding tool does not graze against the guard and

extraction hood or other parts.

• When the segments of the diamond grinding tool are

worn and don’t reach the surface to grind. Mount the

spacer (E) between the mounting ange and the dia-

mond grinding tool. Make sure the bushing is pointing

outwards.

Dismount the diamond grinding tool

You need to dismount the diamond grinding tool before

transporting the power tool, to avoid damaging.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Carat TYPE BS-1253N DUSTEC Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info