Bedienungsanleitung Cardo scala rider fm (Seite 5 von 12) (Englisch)

232599

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

English

scala rider

™

4. After a few seconds the phone will list the scala-rider FM as a

discovered device. Select it and follow your phone’s instructions

to accept the pairing.

5. When prompted enter 0000 (four zeros) as your PIN or passkey.

6. Your phone will conrm that pairing has succeeded and the

headset will begin ashing slowly in Blue.

NOTE: If the Pairing process is not completed within two minutes the

headset will return to Standby mode.

With some mobile phones, you may need to tap the CTRL button

to connect the headset to the phone after pairing is complete.

The scala rider FM headset will automatically connect to the last

phone connected to the headset.

SET UP FOR BLUETOOTH GPS DEVICE

If you have a Bluetooth enabled GPS device and would like to transmit

navigation instructions and sounds from the GPS

device through the headset’s speakers, please follow

instructions described in section below “TO PAIR THE

SCALA RIDER FM TO A BLUETOOTH GPS DEVICE”

If you want to use your mobile phone and your GPS device with the

scala rider FM headset, you should proceed as follows:

1. Pair your GPS device to your mobile phone (Please consult your GPS

device’s User Manual for more information).

2. Pair your headset to the GPS device as described below.

NOTE: Not all Bluetooth enabled GPS devices allow connections to

Bluetooth headsets like the scala rider FM. Please consult your GPS

device’s User Manual for more information.

TO PAIR THE SCALA RIDER FM TO A BLUETOOTH GPS DEVICE:

1. Turn on your GPS device.

2. With the scala rider FM headset turned OFF, press and hold

the CTRL Button until the Red and Blue Lights begin rapidly

alternating.

3. Search for Bluetooth headsets on your GPS device by following

the device’s instructions. Please consult your GPS device’s User

Manual for more information.

4. If your GPS device prompts for a PIN or Passkey enter 0000

(four zeros).

5. Your GPS device will conrm that pairing has succeeded. The

headset will begin ashing slowly in Blue.

6. If you wish to use a Bluetooth mobile phone to make and

receive calls through the headset, you must now pair your

mobile phone to your GPS device by following your GPS and/

or mobile phone’s instructions.

NOTE: If the Pairing process is not completed within two

minutes the headset will return to Standby mode.

ATTACHING THE CLAMP ON THE HELMET

The Helmet Clamp must be attached to the left side of the helmet. Once

attached, the headset unit can be mounted or released from the Helmet

Clamp at any time. If you wish to connect your MP3 player to you head-

set, please refer rst to the assembly instructions listed in section: USING

THE MP3 PLAYER WITH YOUR HEADSET. There are two methods that can

be used in order to attach the Clamp onto the helmet:

Standard Method: Recommended for most helmet types.

Glue Plate Method: Recommended for hel-

mets to which the standard method cannot be

applied, using the Glue Plate included in the box.

Standard Method

1. Use the enclosed Allen Wrench to loosen the two screws on

the Back Plate.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cardo scala rider fm Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cardo scala rider fm

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info