Bedienungsanleitung Cardo Scala Rider G9X Powerset (Seite 13 von 18) (Englisch)

667727

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

NOTES:

• Not all Bluetooth mobile phones can broadcast Bluetooth Stereo

music (A2DP), even if the phone has an MP3 player function.

Consult your mobile phone’s User Manual for more information.

• Not all Bluetooth GPS devices allow connection to Bluetooth audio

devices. Consult your GPS User Manual for more information.

• After pairing, you may need to tap

to connect.

6.2 MAKING AND RECEIVING PHONE CALLS

Answer a call

Tap

or speak any word loudly to answer

by VOX

Reject a call

Remain silent for 15 seconds, or press

for

2 seconds

End a call

Tap

Voice Dial* (if supported

by mobile phone)

Tap

and follow the prompt from the

mobile

Redial*

Double-tap

Hot Dial*

†

Double-tap

or tap

and

simultaneously

Set default mobile

‡

While on a phone call, press

for 5 seconds

Change default mobile

In Standby, press

and for 5 seconds

INTERCOM CONFERENCE MODE

Add/Remove Channel “A”

to/from a call

Tap

while on a phone call

Add/Remove Channel “B”

to/from a call

Tap

while on a phone call

* This feature is not available during intercom or mobile calls

† Before using Hot-Dial, congure your Hot-Dial number via the Cardo Community.

‡ If you have 2 mobile phones paired directly to your scala rider G9x, you will need

to set one of them to use as default for outgoing calls.

6.3 LISTENING TO MUSIC VIA A2DP

Available only on AVRCP compatible Bluetooth audio sources

The scala rider G9x can also receive audio via an MP3

cable from non-Bluetooth MP3 Players or audio

sources as described in section 6.5.

Play

In standby, press

for 2 seconds or use Voice Command

Pause/Stop

Press

for 2 seconds or use Voice Command

Next Track

With music ON, press

for 2 seconds or use Voice Command

Track*

With music ON, press

for 2 seconds or use Voice Command

Music Scan

With music ON, press

(scans up) or (scans down) for 5 sec.

The rst few seconds of each audio track will be played.

Stop Scan

To stop the scan on the current track, say any word loudly into

the microphone or press

for 2 seconds

*With some phones you may need to repeat this action

SWITCHING BETWEEN A2DP AUDIO SOURCES

If a Music Player is paired, the scala rider G9x will use it as the

default A2DP audio source.

1. Stop the music playback from the current device.

2. Start music playback from the other device.

6.4 MUSIC SHARING

Music-sharing allows rider and passenger to listen to the

same music within a range of 33 ft / 10m.

Music sharing works only with A2DP (Bluetooth stereo)

enabled audio sources. In order to share your music with your

riding partner, your scala rider [SENDER] needs to be paired to the

other unit [RECEIVER] on CHANNEL A and the RECEIVER must be in

Standby mode.

English

scala rider

G9x / G9x PowerSet |

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cardo Scala Rider G9X Powerset Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cardo Scala Rider G9X Powerset

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info