667724
7
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
4.3 AUDIO SOURCES AND PRIORITIES
If two connected audio sources try to play simultaneously, your
scala rider automatically determines which audio source to play
through the speakers based on the priority of the connected devices.
Higher Priority
1. Mobile Phone audio or GPS instructions*
2. Intercom / Click-to-Link
3. A2DP (Stereo Bluetooth) audio
4. FM Radio (Built-in)
5. AUX (for corded connection i.e. Music Players)
* GPS instructions from Smartphone GPS Apps
are prioritized like A2DP audio
Lower Priority
Incoming mobile phone calls interrupt ongoing intercom calls
• Incoming intercom calls will interrupt ongoing A2DP music
Intercom and Click-to-Link calls have the same priority. So
Click-to-Link calls will not interrupt any Intercom call in progress,
and vice-versa.
A2DP audio priority can be congured to be higher than Intercom audio
priority (see section 3).
4.4 VOICE CONNECT VOX SETTINGS
The scala rider oers VOX technology for safe and hands-free
operation of some key functions.
VOX Activation Speak any word loudly into the microphone
Answer a call Speak any word loudly into the microphone
Reject a call Remain silent for about 15 seconds
VOX Sensitivity
(Default:
Medium)
See section 3 to adjust settings.
High: Use this setting if it is dicult to activate VOX
Low: Use this setting if it is too easy to activate VOX
Enable/Disable
VOX (For
Intercom/Voice
Command only)
In Standby, press and simultaneously for 2 seconds
• Enable: Blue ash for 2 seconds
• Disable: Red ash for 2 seconds
5. INTERCOM
The scala rider Q3 allows Bike-to-Bike full duplex intercom
communication at a range of up to 1 km / 3,200 ft (subject to
terrain) within line of sight. The Q3 is capable of toggling with
three other riders using Intercom Channels A, B and C.
Pairing with another scala rider
To chat with another scala rider via Intercom, pair your scala rider Q3
to the second device. Pairing is a one-time process. Once paired, the
two units will automatically recognize each other whenever in range.
5.1 INTERCOM COMPATIBILITY
Your scala rider Q3 is compatible with most scala rider models
for intercom calls. In addition, it is also compatible with the
Schuberth SRC-System. Intercom range with other models is
limited to the distance of the device with the shorter range.
For details on how to pair and use your Q3 with other scala rider
models, please visit www.cardosystems.com/Q3compatibility.
5.2 PAIRING INTERCOM CHANNELS
Pairing a Channel will replace any existing paired device on that Channel
with the new device.
If you have purchased the Q3 MultiSet, the retail package contains two
pre-paired units congured to communicate via their
v
buttons on
Channel A.
If for any reason you have to pair them again, OR if you wish to pair
another unit, proceed as follows:
1. Check both scala riders are in Standby.
2. On the rst unit, press
v
for 5 seconds. Once the LED begins
ashing, select the intercom channel you would like to pair by
tapping
v
(Channel “A” pairs automatically).
6
| scala rider
®
Q3 / Q3 MultiSet™
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

cardo-scala-rider-q3

Suche zurücksetzen

  • Bin auf dem Computer bei Cardo registriert. Wenn ich das Gerät Q3 am Computer anstecke kommt die Fehlermelder USB Gerät nicht erkannt. Was kann das für ein Problem darstellen. Früher hat der Computer das Gerät Q 3 immer erkannt. Eingereicht am 7-8-2018 20:18

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cardo Scala Rider Q3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Cardo Scala Rider Q3

Cardo Scala Rider Q3 Bedienungsanleitung - Deutsch - 16 seiten

Cardo Scala Rider Q3 Bedienungsanleitung - Holländisch - 16 seiten

Cardo Scala Rider Q3 Bedienungsanleitung - Französisch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info