Bedienungsanleitung Cardo SHO-1 (Seite 12 von 18) (Englisch)

667728

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

6. PAIRING AND USING A MOBILE PHONE,

GPS OR MP3 PLAYER

To connect your cardo SHO-1 to a Bluetooth device you must rst

pair them. Once paired, they will automatically recognize each

other whenever they are within range (10m / 33ft).

Your unit has two Bluetooth channels for connection to mobile

phones, GPS devices and music players with A2DP.

6.1 PAIRING BLUETOOTH CHANNELS 1 AND 2

1. Make sure Bluetooth is enabled on your phone/GPS/MP3 player.

2. Check the unit is in Standby (single BLUE ash every 3 seconds).

3. To pair Bluetooth Channel 1 – press

for at least 5 seconds

until the RED and BLUE LEDs begin rapidly alternating.

To pair Bluetooth Channel 2 – press

for at least 5 seconds

until the RED and BLUE LEDs begin rapidly alternating.

To pair a GPS, when LEDs begin rapidly alternating, tap .

4. Search for Bluetooth devices on your phone/GPS/MP3 player by

following the device’s instructions.

5. After a few seconds the device will list “cardo SHO-1”. Select it.

6. If prompted for a PIN or Passkey, enter 0000 (four zeros).

7. The device will conrm that pairing has succeeded and the LED

will begin ashing Blue, once every 3 seconds.

8. If pairing is not completed within 2 minutes, the unit will return

to Standby mode.

IMPORTANT!

• If you have paired 2 dierent mobile phones directly to your cardo

SHO-1, you will need to set one as default for making calls.

• If your GPS supports it, you can pair the second mobile phone

directly to the GPS and then pair the GPS to your cardo SHO-1, and

so connect both mobile phones and the GPS to your cardo SHO-1.

NOTES:

• Not all Bluetooth mobile phones can broadcast Bluetooth Stereo

music (A2DP), even if the phone has an MP3 player function.

Consult your mobile phone’s User Manual for more information.

• Not all Bluetooth GPS devices allow connection to Bluetooth audio

devices. Consult your GPS User Manual for more information.

• After pairing, you may need to tap

to connect.

6.2 MAKING AND RECEIVING PHONE CALLS

Answer a call

Tap

or speak any word loudly to answer

by VOX

Reject a call

Remain silent for 15 seconds, or press

for

2 seconds

End a call

Tap

Voice Dial* (if supported

by mobile phone)

Press

for 2 seconds and follow the prompt

from the mobile

Redial*

Press

for 2 seconds

Hot Dial*

†

Tap three times

Set default mobile

‡

While on a phone call, press for 5 seconds

Change default mobile

In Standby, press

for 5 seconds

INTERCOM CONFERENCE MODE

Add/Remove Channel “A”

to/from a call

Tap

while on a phone call

Add/Remove Channel “B”

to/from a call

Double-tap

while on a phone call

* This feature is not available during mobile calls.

† Before using Hot-Dial, congure your Hot-Dial number via the

Cardo Community or the Cardo Smartset App.

‡ If 2 mobile phones are paired directly to your cardo SHO-1, set one to use as

default for outgoing calls.

| cardo SHO-1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cardo SHO-1 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cardo SHO-1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info