Bedienungsanleitung Carrera Digital 124 - 23605 SPORTSCAR DUEL en WIRELESS (Seite 7 von 7) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

469907

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

Pace Car function

Pit Stop 30346

300

15 0

250

200

100

6x CLICK

SPEED

CLICK

1 2

3 4

Place car on the track, push lane-change-button twice, lift car at the

front, put car back again (see coding/decoding ﬁ g. 1 + 2).

While car´s lights are ﬂ ashing push lane-change-button 6 times ﬁ g.

. Start car, push lane-change-button for requested speed ﬁ g.

(irrespective of the car´s position). Car will assume this speed con-

sistently and will enter the next Pit Stop automatically ﬁ g.

Start Pace Car function:

Start Pace Car by pushing the button at the Black Box ﬁ g.

. After

10 seconds each lane switch will change independently until the

Pace Car enters the Pit Stop. Carry out car decoding (see point

coding/decoding).

Setting basic speed

1 – 10

(individually for one and/or several cars)

Please note the following procedures:

1. Switch oﬀ Black Box, place car/s on the track, eﬀ ect coding of

WIRELESS speed controller to speed controller 1 as per point „Cod-

ing/Decoding“.

2. Switch on WIRELESS speed controller located on lower side

(ON/OFF switch).

3. Press and hold lane-change-button during Black Box is switched

on again. Don´t release the lane-change-button until the 1st LED

lights red. Levels are set by pushing lane-change-button. Conﬁ rm

speed by pressing the speed controller´s tappet (thumb) (=> middle

LED will light).

1 LED on = low speed

5 LEDs on = high speed

Setting braking effect

1 – 10

(individually for one and/or several cars)

Please note the following procedures:

1. Switch oﬀ Black Box, place car/s on the track, eﬀ ect coding of

WIRELESS speed controller to speed controller 2 as per point „Cod-

ing/Decoding“.

2. Switch on WIRELESS speed controller located on lower side

(ON/OFF switch).

3. Press and hold lane-change-button during Black Box is switched

on again. Don´t release the lane-change-button until the 1st LED

lights red. Levels are set by pushing lane-change-button. Conﬁ rm

braking eﬀ ect by pressing speed controller´s tappet (thumb) (=>

middle LED will light). Before the start return speed controller to the

original connector!

1 LED on = low braking eﬀ ect

5 LEDs on = high braking eﬀ ec

Setting fuel tank capacity

Pit Stop 30346

1 – 10

(individually for one and/or several cars)

Activate fuelling function at the Black Box.

Please note the following procedures:

1. Switch oﬀ Black Box, place car/s on the track, eﬀ ect coding of

WIRELESS speed controller to speed controller 3 as per point „Cod-

ing/Decoding“.

2. Switch on WIRELESS speed controller located on lower side

(ON/OFF switch).

3. Press and hold lane-change-button

during Black Box is switched on again. Don´t release the lane-

change-button until the 1st LED lights red. Fuel capacity is set

by pushing lane-change-button. Conﬁ rm by pressing speed con-

troller´s tappet (=> middle LED will light).

Before the start return speed controller to the original connector!

1 LED on = low fuel capacity

5 LEDs on = full tank

Refuelling:

Depending on the fuel capacity the car´s lights start to ﬂ ash after

some time, the car slows down and might start to stutter. For refuel-

ling enter the Pit Stop and release the speed controller´s tappet.

(Fuelling amount depends on car´s standing time in the Pit Stop).

a) Filling up: wait until car´s lights stop ﬂ ashing.

b) Partial refuelling: start while car´s lights still ﬂ ash.

c) Non-refuelling: car drives on at reduced speed.

Maintenance and care

To ensure a proper operation of the motor-racing circuit, all race-

track components should be regularly cleaned. Pull the plug prior to

cleaning.

Racetrack: Keep the track surface and track slots clean with a

dry cloth. Do not use any solvents or chemicals for cleaning. When

it is not in use, store the racetrack in a clean and dust-protected

location, preferably in the original cardboard box.

Car check: Clean axle and wheel bearings, pinion gears, gear-

wheels and bearings and lubricate using a resin- and acid-free

grease. You can use a toothpick or similar as aid. Regularly check

the condition of sliding contacts and tyres..

Troubleshooting

Driving tips

Troubleshooting:

In case of any malfunctions, please check the following:

• Has the connection to the power supply been established cor-

rectly?

• Have transformer and speed controllers been connected

correctly?

• Are the track connections faultless?

• Are the racetrack and track slots clean and free of any foreign

objects?

• Are the sliding contacts in order and do they make contact with

the track slot?

• Are the cars correctly coded to the according speed controller?

• The track‘s current feed will be switched oﬀ automatically for 5

seconds, if there is an electrical short circuit: this will be notiﬁ ed by

audible and visual signals.

• Are the cars placed on the track in running direction? In case of

non-functioning push the running direction switch which is on the

car´s bottom.

• Please take into account that exposing the Carrera WIRELESS

System for Carrera DIGITAL 124/132 to direct or strong extraneous

light (sunlight, halogen lamps, neon lamps and big ﬂ at screens) may

result in malfunctions.

• Double encoding of the speed controllers will be indicated by the

LED ﬂ ashing quickly.

• Should operation be impossible despite the speed controllers and

Black Box having being switched on, please check the connection

between Receiver/Tower and Black Box.

• In case the receiving radius decreases or the cars´ driving charac-

teristics deteriorate please check the batteries.

Note:

During operation small car parts as spoilers or mirrors may get oﬀ or

brake due to being original detailed parts of the car model. To avoid

this it is possible to remove them before operation.

Driving technique:

• You can drive fast along the straight track but you should brake

before the curve and then accelerate again when coming out of the

curve.

• Do not fasten or block the vehicles when the motor is running:

overheating or damage to the motor could result otherwise.

Note: When using track systems which are not manufactured by

Carrera the existing guide keel has to be replaced by the special

guide keel (#85309). While using the Carrera crossing (#20587) or

high banked curve 1/30° (#20574) slight driving noise might occur

which is due to the full-scale genuineness and does not aﬀ ect ﬂ aw-

less operation.

All Carrera spare parts are available in the webshop:

www.carrera-toys.com

Delivery exclusively to Germany, Austria, Netherlands, Belgium and

Luxembourg..

Technical specifications

Output voltage: Toy transformer

18 V

54 VA

18 V 43,2 VA

Current source speed controller:

6 x 1.5 V Mignon batteries (AA/R6).

Batteries are not included in delivery.

ATTENTION:

It is not possible to use rechargeable batteries.

This device is marked by “selective sort throught” symbol related to

sort through domestic, electric and electronic, waste.

This means the product must be treated by a specialized “sorting/

collecting” system in accordance with European directive 2002/96/

CE, to reduce the impact upon environment.

For more precise information, please contact your local administra-

tion.

Electronical product which are not going through special collect-

ing, are potentially dangerous for environment and human health,

because of dangerous substance.

Carrera Digital 124 - 23605 SPORTSCAR DUEL en WIRELESS Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info